cable, vdsl, patch

Shielded twisted pair cable FTP, category 5, 25 pairs, solid, indoor

1 – Jacket 2 – Rip-cord 3 – Shield – foil 4 – Drain wire 5 – Protective skin 6 – Solid twisted pair 7 – Main load-bearing element

Specifications:

Meets ANSI/EIA/TIA 568-A requirements Fire protection – CM The cable meets UL 1581 VW-1 fire safety standard

Description:

Shielded multi-pair Copper cable, 25 (50, 100) pairs, category 5, solid Shield: aluminum foil Cable is used for indoor installation

Materials:

Conductive material: wire made of soft annealed electrolytic copper Conductor insulation: HDPE The cable jacket: PVC An aluminum tape shield is helically applied over the cable core with a minimum overlap of 25% or 5 mm (0.19")

Technical characteristics:

Conductor diameter: 0.51 mm (0.02") (24 AWG) Insulated conductor diameter: 0.9 mm (0.035") Outer cable diameter: 15 mm (0,59") Jacket thickness: 0.8 mm (0.031") Minimum bend radius: 8 outer cable diameters Conductor elongation: 14% minimum Rip cord has a breaking strength of 10 kg (98 N) Drain wire diameter: 0.5 mm (0.019") Pulling strength: 500 N Breaking strength: 600 N Installation temperature: -5°C – +40°C (+23°F – +104°F) Operating temperature: -5°C – +60°C (+23°F – +140°F) Weight per 1000 ft: 72.5 – 211.8 kg (190.2 – 467 lbs) Standard package: 500 – 1000 m (1640 – 3280 ft)

Electrical characteristics:

Frequency, MHz	Max Attenuation, dB/100m (dB/100ft)	Min PS-NEXT losses, dB	Low value PS-ACR, dB/100m (dB/100ft)
0.772	1.8 (0.55)	64	62.2 (19.0)
1.0	2.0 (0.6)	62	60.0 (18.3)
4.0	4.1 (1.25)	53	48.9 (14.9)
8.0	5.80 (1.8)	48	42.2 (12.9)
10.0	6.5 (2.0)	47	40.5 (12.3)
16.0	8.2 (2.5)	44	35.8 (10.9)
20.0	9.3 (2.8)	42	32.8 (10.0)
25.0	10.4 (3.2)	41	30.6 (9.3)
31.25	11.7 (3.6)	39	28.3 (8.6)
62.5	17.0 (5.2)	35	18.0 (5.5)
100.0	22.0 (6.7)	32	10.0 (3.0)

Conductor resistance at 20°C (68°F)	93.8 Ohm/km (151.3 Ohm/mile)
DC Resistance Unbalance	3%
Resistance at 1-100 MHz	100 ± 15 Ohm
Capacity at 1 kHz	50 ± 4 pF/m (15.2 ± 1.22 pF/ft)
Capacitive unbalance at 1 kHz	3300 pF/km (5322.6 pF/mile)
Min losses at 64 kHz	43 dB
Maximal voltage	300 V
Insulating strength	1000 V RMS
Max propagation delay at 1 MHz at 10 MHz at 100 MHz	5.7 ns/m (1.74 ns/ft) 5.4 ns/m (1.64 ns/ft) 5.3 ns/m (1.61 ns/ft)
Derivation of propagation delay at 1-100 MHz	35 ns/100 m (10.67 ns/100 ft)
Min insulation resistance with voltage 500 V	5 GOhm/km (8.05 GOhm/mile)
Propagation velocity	68%

Ordering:

FTP25M-C5-SOLID-INDOOR

Shielded twisted pair cable (FTP), 25 pairs, category 5, solid, indoor

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives