cable, vdsl, patch

Steel access floor panels

Our VENTEC steel ventilation panels are ideal for use in computer centers that require high rates of air flow and low withdrawal resistance. Panel The VENTEC panel consists of a welded tubular frame construction with a powder-coated, conductive surface. Steel panels can be perforated to air-condition the room. Round holes with various diameters and slots with four or six rows make visually concealed ventilation possible with floor coverings suited for seepage ventilation.

Floor coverings - Textile coverings - Elastic coverings Special features - High degree of stability - Very rigid panels - Very thin panels - Moisture-resistant - Very strong - Very high degree of conductivity Range of use - Industrial and factory rooms - Training and research rooms - Office and designing areas

Steel panel ST38-NP without perforation	Steel panel ST38-23 with perforation for ventilatio - slots
Steel panel ST36-15 perforated with round holes	Rear view of steel panel

System specifications

System designation	Ventec
Type	ST38-NP	ST38-15		ST38-23
Description
Panel/material	Welded tubular frame construction with power-coated, conductive surface
	?	Perforation for ventilation Slots		Perforation for ventilation Slots
Dimensions	600 x 600 mm (23.6”x23.6”)
Panel thickness	38.5 mm (1.52”)	38.5 mm (1.52”)		38.5 mm (1.52”)
System weight1	26 kg/m2?(5.33 lbs/ft2)	26 kg/m2?(5.33 lbs/ft2)		26 kg/m2?(5.33 lbs/ft2)
Substructure? With construction heights? > 500 mm (19.7”)	Steel pedestals RO stringers
Construction height2	70 ? 1250 mm (2.76” ? 49”)
Load capacity rating (Nominal load)	See “STATICS“ supplement
Fireproofing3? Building-material Class of the panel Fire-resistance rating	-		A1 (non-combustible)
Free air percentage	-	15%		23%
Suitability of coverings	Textile coverings, elastic coverings, A (non-combustible) loosely laid tiles		Elastic coverings with perforation, textile coverings and loosely laid tiles with perforation or suitability for diffusing air
Electric conductivity4	>= 5x106?O

1) Other panel thicknesses available on request
2) With 150 mm (5.9”) finished floor height, without floor covering
3) Special heights available on request
4) The floor covering influences these values

System specifications

System designation	Ventec
Type	ST36-15	ST36-24		ST36-38
Panel/material	Welded tubular frame construction with power-coated, conductive surface
	Perforation for ventilation round holes
Dimensions	600 x 600 mm (23.6”x23.6”)
Panel thickness	36 mm (1.42”)
System weight1	36 kg/m2?(7.38 lbs/ft2)
Substructure? With construction heights? > 500 mm (19.7”)	Steel pedestals RO stringers
Construction height2	70 ? 1250 mm (2.76” ? 49”)
Load capacity rating (Nominal load)	See “STATICS“ supplement
Fireproofing3? Building-material Class of the panel Fire-resistance rating	-		A1 (non-combustible)
Free air percentage	15%	24%		38%
Suitability of coverings	Elastic coverings with perforation, textile coverings and loosely laid tiles with perforation or suitability for diffusing air
Electric conductivity4	>= 5x106?O

1) Other panel thicknesses available on request
2) With 150 mm (5.9”) finished floor height, without floor covering
3) Special heights available on request
4) The floor covering influences these values

VENTEC ST38-15 with slot	VENTEC ST38-15 without floor covering
	VENTEC ST38-15 with floor covering
?
VENTEC ST38-23 with slot	VENTEC ST38-23 without floor covering
	VENTEC ST38-23 with floor covering
?
VENTEC ST36-15 with round hole, ? 8 mm (0.3”)	VENTEC ST36-15 without floor covering
	VENTEC ST36-15 with floor covering
?
	If the room is ventilated through the access floor using ventilation inserts, drilled holes or the like, this will be evident on the top side of the floor covering. This is where seepage ventilation access flooring differs from standard systems. The structure of the floor covering allows air to flow through without any visible perforation. Make certain that the floor covering is specially suited for this purpose.
	Note: To prevent the formation of the perforation pattern in the floor covering (due to soiling), be sure to replace the ventilation filters often; the structural subfloor must be suitable and competent maintenance of the system must be carried out.
VENTEC ST36-24 with round hole, ? 10 mm (0.4”)	VENTEC ST36-24 without floor covering
	VENTEC ST36-24 with floor covering
?
VENTEC ST36-38 with round hole, 12 mm (0.5”)	VENTEC ST36-38 without floor covering
	VENTEC ST36-38 with floor covering

Call (866) 342-3721 Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives