American Tech Supply is now an authorized Hyperline distributor
From copper to fiber, the Hyperline system of products includes everything you need for installation, termination, testing and troubleshooting. And our level of technical expertise, training and customer support ensures that your total cost of ownership is kept to a minimum.
Patch Cord UTP, Category 6a, 10G, Latch guard
?
Specifications
Meets TIA/EIA-568-B.2-10 category 6a
Meets FCC, Part 68, Subpart F
Materials
Cable
Conductor: 7 copper wires, 26 AWG
Insulation: High Density Polyethylene (HDPE)
Number of pairs: 4
Color of twisted pairs: blue-white/blue, orange-white/orange, green-white/green, brown-white/brown
Drain wire: 7 wires
Jacket: fire retardant PVC ?6.35 ? 0.2 mm (0.25" ? 0.008")? Plugs
2 pieces RJ-45 8P8C
Contact: phosphor bronze with 1.27 micron (50 microinches) hard gold plating over 2.54 micron (100 microinches) nickel
Housing: flame retardant PCB (polycarbonate) UL 94V-0
Latch guard Material: PVC
Technical characteristics
Storage temperature: -40?C - +70?C (-40 ?F - +158 ?F)
Operation temperature: -10?C - +60?C (+14 ?F - 140 ?F)
Relative humidity: 93% noncondensing
Retention: 50 N for 60?5 s
Insertion/extraction life: 750 min.
Tensile strength: = 20 N per wire
Electrical characteristics
Insulation resistance at 100 VDC
500 MOhm min.
Dielectric withstand voltage (contact to contact)
1000 VDC or VAC
Dielectric withstand voltage (contact to test panel)
?