Ideal Product Categories

About Us

cable, vdsl, patch

 

 

VelocityT Cable Pulling Lubricant- Ideal Industries- Ideal Industries Cutters - Coax/Twisted Pair Cutters - Twisted Pair Cutters - Coax Cutters - Fiber Cutters- Fiber Optic Test Equipment

From copper to fiber, the IDEAL DataComm system of products includes everything you need for installation, termination, testing and troubleshooting. And our level of technical expertise, training and customer support ensures that your total cost of ownership is kept to a minimum.

Velocity™ Cable Pulling Lubricant


Description

Features

  • High cling factor
  • Maximum friction reduction
  • Specification grade
  • Compatible with all popular cable types
  • Temperature stable
  • Environmentally safe - non-toxic, non-flamable and non-corrosive
  • UL listed
  • Non-combustible residue

Models

Available Sizes Cat. No.
1 Qt. Squeeze Bottle 31-276
1 Gal. Bucket 31-277
5 Gal. Bucket 31-278
55 Gal. Drum 31-279
1 Quart Bag (12 bags per bucket) 31-282
1/2 Gallon Bag (6 bags per bucket) 31-283

Specification

bricity PVC or LDPE-jacketed cable on PVC conduit at 200 lbs/ft (2.91 kN/m) normal pressure; coefficient of dynamic friction < .15 PVC or LDPE-jacketed cable on HDPE innerduct at 200 lbs/ft (2.9 kN/m) normal pressure; coefficient of dynamic friction
< .15
Percent non-volital solids 3.5 to 5.5%
Appearance Thick, cream colored gel material
Wax, grease and silicone content None
Temperature use range 25° F to 140° F (-3.8° C to 60° C)
pH 6.5 to 8.0
Cable Compatibility No deleterious effects on physical or electrical properties of cable jackets.
Polyethylene stress cracking No stress cracking on LDPE cable jacket when tested by ASTM D1693.
Cling Factor Twelve inches (30 cm) of a one-inch (2.5 cm) diameter cable will hold at least 75 grams of lubricant for one minute whne held vertically (at 70° F/20° C)
Temperature stability No more than 20% change in Brookfield viscosity from 40° F to 100° F (5° C to 40° C). No phase-out after 5 freeze/thaw cycles or 24-hour exposure at 120° F (50° C).
Toxcicity Non-toxic and non-sensitizing. Industrial use only.
Cleanup Complete cleanup possible with water.
Flammability Lubricant has no flash point and dried residue is non-flamable.

 

Recommended Quantity

Pulling Length
in Feet		 Conduit ID in Inches
1" 2" 3" 4"
50 0.075 0.15 0.225 0.3
100 0.15 0.3 0.45 0.6
150 0.225 0.45 0.675 0.9
200 0.3 0.6 0.9 1.2
250 0.375 0.75 1.125 1.5
300 0.45 0.9 1.35 1.8
350 0.525 1.05 1.575 2.1
400 0.6 1.2 1.8 2.4
450 0.675 1.35 2.025 2.7
500 0.75 1.5 2.25 3
550 0.825 1.65 2.475 3.3
600 0.9 1.8 2.7 3.6
650 0.975 1.95 2.95 3.9
700 1.05 2.1 3.5 4.2
750 1.125 2.25 3.375 4.5
800 1.2 2.4 3.6 4.8
850 1.275 2.55 3.825 5.1
900 1.35 2.7 4.05 5.4
950 1.425 2.85 4.275 5.7
1000 1.5 3 4.5 6
1050 1.575 3.15 4.725 6.3
1100 1.65 3.3 4.95 6.6
1150 1.725 3.45 5.175 6.9
1200 1.8 3.6 5.4 7.2

 

Product Resources

  • Velocity™ Brochure
    (PDF - 455KB)

    • Documentation

    		  

     

     

     

     

     

     

     

    Networks /
    DataComm

    Wire Management

    Wire Installation

    Termination

    Test & Measurement

    Tools & Totes

    Mil-Aero Wire Processing

    Engineered Solutions for the OEM

    Electrical Supplies

    BIF-Bend Insensitive Fiber

    New Bend Insensitive Fiber Jumpers