PCS Carrier Routers-Intelligent CSU-Kentrox Wireless Carrier Router-Triple T1 ICSU- Triple T1 CSU-Wireless Carrier Routers-Wireless Carrier Routers- Carrier Grade Routers-Carrier Grade Switches- TRIPLE T1 CSU- CSU's

Amercan Tech Supply is now a reseller of Kentrox Cross PATH IIe wireless router,Kentrox Wireless Carrier Router,Triple T1 ICSU, Triple T1 CSU,Wireless Carrier Routers,Wireless Carrier Routers, Carrier Grade Routers, Carrier Grade Switches TRIPLE T1 CSU,and CSU's. Our carrier grade wireless routers will help successful wireless service providers attract and retain their customers with reliable network access, good call quality, and competitive pricing. Failure in any one of these areas can lead to rapid turnover or permanent customer loss. Here is how Kentrox wireless products help service providers proactively manage their networks to avoid these problemsToday's expanding PCS market requires wireless service providers to carry more traffic from each cell site than ever, while minimizing the amount of downtime and resulting lost revenue. CrossPATH® IIe Triple T1 CSU has been designed specifically for service providers looking for ways to proactively manage their networks.

.We now accept Visa,Discover Master Card & AMEX To Switches-Routers

Kentrox Wireless Carrier Routers-Wireless Carrier Router- Carrier Grade Router-Carrier Grade Switches-CSU- CSU'sentrox Wireless Switches- CSU-DSU's-Wireless Routers-Q-Series Routers

CrossPATH II-CrossPATH® II Triple T1 Intelligent CSU

For cell site locations with multiple radios, the CrossPATH IIe Triple T1 Intelligent CSU with Ethernet allows wireless service providers to integrate multiple radio interfaces into fewer T1s to save money on backhaul charges.The CrossPATH II Triple T1 Intelligent CSU solution minimizes wireless network downtime, lowers operation and support expenses, and maximizes T1 backhaul circuit utilization.
Lower costs

The Kentrox CrossPATH II lowers PCS backhaul circuit charges by combining multiple cell stie traffic onto a single T1 circuit.
Proactive Management of Wireless Networks

In today's competitive PCS and cellular business, wireless service providers are looking for ways to maximize billed minutes and minimize the amount of downtime and resulting lost revenue. CrossPATH II Triple T1 CSU has been designed specifically for these service providers.

The CrossPATH II is ideal for use in PCS networks deploying cell sites in a daisy chain arrangement. CrossPATH II integrates three T1 ports and a V.35 interface giving wireless service providers a single product solution for their PCS deployment needs. The unique Terminal Interface loopback capabilities of the CrossPATH II allow bit error rate testing to each site in the chain without disrupting service to the other sites.

When being used in a traditional cellular environment, the CrossPATH II provides all interfaces necessary to combine voice, data, and fraud protection into a single T1 for transport back to the mobile switching center.

Remote in-band management and performance monitoring capabilities are available over a dedicated DS0 that can be used for a single CrossPATH II, or shared by any number of units in a daisy chain. For point-to-point installations, the FDL can carry all of the same information without occupying precious bandwidth.

Product Highlights

* 5-year warranty
* Combines cell traffic, CDPD, and RFFP onto a single T1 link
* Combines multiple cell site traffic onto a single T1 connection
* Compact, single rack-unit (RU) chassis minimizes space requirements
* Each unit has a unique IP address
* Embedded SNMP supports in-band management and performance monitoring
* Specially designed for front or rear access mounting
* Supports assignment of individual DSOs to any interface
* Supports non-intrusive Terminal Interface loopbakcs
* Test Access Jacks for on-site troubleshooting

Minimize backhaul circuit charges

Traditionally, a full T1 has been used to provide service to each PCS site to assure that a failure at one site does not affect operation of other sites. With CrossPATH II CSU, transport managers can confidently deploy sites in a daisy chain, and save backhaul costs without compromising network integrity. CrossPATH II supports standards-based SNMP management, allowing operations personnel to locate and prevent problems before they become outages.
Minimize operations and support expenses

CrossPATH II helps control wireless service provider operation and support expenses by offering comprehensive T1 performance information. With CrossPATH II you can remotely determine port status, set loopbacks, view performance reports and change configuration through an easy-to-use menu structure.

Since service-affecting problems can be predicted before they cause outages, CrossPATH II improves network reliability and helps you save revenue lost in downtime.

Additionally, if an installed unit requires a software upgrade, you can download new software in-band over the designated DS0 using TFTP. The CrossPATH II continues to operate through the download.

Combines traffic

The CrossPATH II combines cell traffic, CDPD, and RFFP onto one T1 for transport back to the Mobile Switching Center (MSC).
Designed for convenience

Occupying a single rack unit of vertical space and the ability to be mounted in any number of configurations makes the CrossPATH II ideal for installing in the space limitations of remote cabinets.

For on-site installation and troubleshooting, the CrossPATH II provides front and rear panel LEDs, and a local maintenance port. Test Access Jacks are also provided for easy onsite troubleshooting. These features will help technicians diagnose network problems quickly and easily regardless of how the unit is mounted.

Low power consumption and a wide input voltage range make the CrossPATH II ideal for use in any DC powered, battery backup environment.
Visibility into every corner of your network

In today's wireless market, you need to spot problems and solve them before they degrade service, paralyze users, or bring the system down. Any of these network problems can cost you valuable time and money.

The CrossPATH II remote management and in-band performance monitoring capabilities help prevent lengthy downtime and speed problem resolution. Deploying CrossPATH II now will save you time and money over the lifetime of your network.

In addition, you can use the two V.35 ports to monitor any combination of timeslots within any of the four DS1s. This ability allows you to test without disrupting service on the other channels, and eliminates the need for specialized test equipment. The ports also support data port and data terminal loopbacks.

Remote management

The CrossPATH IIe offers remote in-band management of multiple units over a single customer-selected DS0.
Designed for convenience

Occupying a single rack unit of vertical space and with the ability to be mounted in any number of configurations, the CrossPATH IIe is ideal for installing in the space limitations of remote cabinets. For on-site installation and troubleshooting, the CrossPATH IIe provides front and rear panel LEDs, a loopback push button and a local maintenance port. Test access jacks are also provided for easy on-site troubleshooting. These features will help technicians diagnose network problems quickly and easily regardless of how the unit is mounted.

Low power consumption and a wide input voltage range makes the CrossPATH IIe ideal for use in any DC-powered, battery-backup environment.
Combine traffic

The CrossPATH IIe combines cell traffic, E911 locator information, CDPD and RFFP onto one T1 for transport back to the Mobile Switching Center (MSC).
Visibility into every corner of your network

In today's wireless market, you need to spot problems and solve them before they degrade service, paralyze users, or bring the system down. Any of these network problems can cost you valuable time and money.

The CrossPATH IIe remote management and in-band performance monitoring capabilities help prevent lengthy downtime and speed problem resolution. Deploying CrossPATH IIe will save you time and money over the lifetime of your network.

Proactive Management of Wireless Networks

In today's competitive PCS and cellular business, wireless service providers are looking for ways to maximize billed minutes and minimize the amount of downtime and resulting lost revenue. CrossPATH II Triple T1 CSU has been designed specifically for these service providers.

The CrossPATH II is ideal for use in PCS networks deploying cell sites in a daisy chain arrangement. CrossPATH II integrates three T1 ports and a V.35 interface giving wireless service providers a single product solution for their PCS deployment needs. The unique Terminal Interface loopback capabilities of the CrossPATH II allow bit error rate testing to each site in the chain without disrupting service to the other sites.

When being used in a traditional cellular environment, the CrossPATH II provides all interfaces necessary to combine voice, data, and fraud protection into a single T1 for transport back to the mobile switching center.

Remote in-band management and performance monitoring capabilities are available over a dedicated DS0 that can be used for a single CrossPATH II, or shared by any number of units in a daisy chain. For point-to-point installations, the FDL can carry all of the same information without occupying precious bandwidth.

For cell site locations with multiple radios, the CrossPATH IIe Triple T1 Intelligent CSU with Ethernet allows wireless service providers to integrate multiple radio interfaces into fewer T1s to save money on backhaul charges.
CrossPATH II

The CrossPATH II Triple T1 Intelligent CSU gives wireless service providers the tools to proactively manage their PCS networks to minimize expensive cell downtime.
M-PATH

The M-PATH T1 Intelligent CSU saves money by minimizing on-site technician vists to remote base stations in PCS networks. It's extended temperature range and minimal footprint make it ideal for outdoor installation.

Featured with:
- support for 2.4 and 5 GHz bands, based on DSSS and OFDM technologies;
- channel throughput – up to 54 Mb/s
- intelligent deterministic non-collision protocol in air based on 802.16 grant-request MAC-paradigm;
- power QoS capabilities and traffic shaping;
- IP routing, security, VPN and firewall;
- flexible network management;
- VoIP functionality;
- Mesh networking support;
- powerful integrated diagnostic tools;
The router may be used as any network element (product series differ only in CPU performance):
- as a subscriber side unit connecting a subscriber LAN to a WAN,
- as a network access point/base station providing for integration of subscriber side units into a uniform network (point-to-point or point-to-multipoint) ;
- as a repeater enabling to increase the distance between a subscriber side unit and a base station, or to bypass an obstacle,
- as a backbone network element.
Product capabilities and performance allow its customers to accomplish the following tasks specific for telecom carrier activities:
- Carrier and ISP access networks, last mile and Metropolitan Area Network solutions;
- enterprise networks, connecting remote branches, telemetry. Network solutions for rural, scarcely populated areas combining severe climate conditions and
tough functional requirements for networked equipment and office branches (oil companies, mining, utilities);
- IP telephony in wireless networks.
The largest Moscow fixed broadband wireless network was built using InfiNet products.
The network has complete Moscow coverage area and sixty kilometers coverage in Moscow suburbs and rural areas. Cell coverage area for 2.4 GHz band – up to 60 km and
for 5 GHz band – up to 30 km. The maximal subscriber number per base station – up to 30 subscribers. For cell – 120 subscribers.
The network has mixed and flexible topology (point-to-point, point-to-multipoint), provides multiple services (enterprise VPN, Internet access, VoIP).