West Coast (866) 342-3721-------East Coast (866) 650-DATA

New Telect Fiber Optic Enclosure-click here

Rack Mount Fiber Patch Panels

The two-rack space four & six module fiber optic enclosures provide additional capacity for higher fiber count requirements, enabling up to 48 fiber capacity in the four module enclosure, and up to 72 fibers in the six-module version. Both enclosures feature recessed front panel, facilitating coupling access, and two access doors in front and rear. The plexi-glass front panel enables visual inspection when closed. All Signamax connector interface modules are compatible with the two-rack space enclosure.

The Signamax four-rack space, 12-module fiber optic enclosure contains all of the features of the two-rack space model, but with additional capacity to manage fiber counts up to 144. Cable entry/exit feature utilizes a flexible grommet seal, which is cut at time of installation to accommodate the desired cable diameters for entry and exit points. These grommets provide a dust & debris barrier during and after installation. All Signamax connector interface modules can be utilized in the four-rack space enclosure. Optional 12- and 24-fiber splice trays are available.

Rack Mount Fiber Optic Enclosures- more info

Wall Mount Fiber Optic Enclosures-more info

Signamax wall-mount fiber optic enclosures manage, protect & organize fiber optic terminations for single and multi-mode fiber optic cables. Enclosures accept Signamax modules to accommodate a variety of connector interfaces The WFE-2 supports from 12 to 24 fiber counts while the WFE4 accommodates from 12 to 48 fibers. Enclosures and connector modules are ordered separately.

Wall Mount Fiber Optic Enclosure

Signamax slide-out rack-mount panel provides a simple, high-density, low profile solution for easy access and management of fiber optic terminations in a one-rack space design. The rack-mount sliding tray panel accommodates up to 24 fibers in ST, SC, MTRJ and LC connector interfaces. The sliding-tray is equipped with slack-fiber storage spools, and comes complete with a number of cable management devices for organizing cables entering and exiting the panel. An optional splice tray is available.

2-Module Low Profile Slide-Out Rack Mount Fiber Optic Enclosure

Fiber Optic Patch Panels

ST Fiber Optic Panels-ST Fiber Patch Panels

SC Fiber Optic Panels-SC Fiber Patch Panels

LC Fiber Optic Panels- LC Fiber Optic Patch Panels

MT-RJ Fiber Optic Panels- MTRJ Fiber Patch Panels

12-Port Fiber Optic Mini Wall Mount Panels

For a general review of fiber optic technology, click here

We Supply FTTH Projects-SBC-Verizon Fiber To The Curb/Home Fiber Optic-OSP-Fiber Test Equipment

AFL-LL-400b Optical Splicing Enclosures	AFL-LL-400b Pedestal Optical Splicing Enclosures	AFL-LL-500b Optical Splicing & Distribution Enclosures	AFL- Optical Entrance Enclosures	ICC Fiber Optic Enclosures	Lan Racks	Outside Plant Fiber Enclosures Click Here

Front & Rear Loading Fiber Optic Patch Panels
Our new fiber optic enclosures by Contech and fiber patch panels are available in multiple configurations with high density port counts in a minimum of space, which provide an extremely organized above the floor infrastructure and manageable cable reconfiguration. ConTech features a 256 port high density panel with either LC, MT-RJ, or MU connector configurations in the same foot print for migration ease from one connector style to another. Also available are high density 12 to 48 port 1 rack unit panels with ribbon array connectivity MP or MTP connectors

Front & Rear Mounted Fiber Optic Enclosures

• Versatile cassettes
• High density
• Front access
• Rear access
• Under floor
• Innovative wire management
• Retro-fit of existing panels
• LC, MT-RJ, MU, SC duplex
• Custom silk screening
• 19, 23, or 24 inch mounting

Corning (compatible) Wall Mount Enclosures

Corning (compatible) Wall Mount Fiber Optic Enclosures

Fiber-Conn's wall-mount patch enclosures are designed for direct termination of up to 96 fibers. The WAC series wall mount fiber optic enclosures accommodate up to 8 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The 16-gauge steel with corrosion-resistant black powder finish coat housing provides excellent protection for the inside fibers. Wall-mount available unloaded, as well as having the capability to become a full-splice enclosure with mechanical terminations. A large variety of connector adapters are offered to meet your specific requirements.

Features and Benefits

• Three sizes available with up to 8 adapter panel capacity
• 16-gauge steel with corrosion-resistant black powder finish coat
• Swing-down door with cable strand for more work space
• Grommets at the top and bottom
• Strain-relief hardware and routing guides help maintain minimum bend radius.
• Available unloaded or fully loaded with capability of mechanical termination
• Zip ties and installation screws included

Part No. WAC-1X-Price $71.39 each
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment. *The WAC-1X does not support splice trays.
Lead time: In Stock, Immediate Shipment

Part No. WAC-2X-Price $79.64 each
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-4X- Price $95.79 each
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-8X- Price $199.25 each
Dimensions: Width = 17'', 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Part No. WAC-12X
Dimensions: Width=17.75", Depth = 5.87'', Height = 16.75"
Features: Wall-mount enclosure accepts 12 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock.
Lead time: In Stock, Immediate Shipment

Rack Mount Enclosures

		Fiber Optic Patch Panels-Rack Mount (RAC Series) Fiber-Conn's rackmount patch enclosures are designed for direct termination of up to 144 fibers. The RAC series accommodates up to 12 modular panels and is equipped with routing guides to limit bend radius and enhance strain-relief control. The heavy-duty metal body provides excellent protection for the inside fibers. A large variety of connector adapters are offered to meet your specific requirements. MTP module cassettes and module preassemblies are available for easy fiber installation and management. Applications Premise data network cabling and installations Central office locations for Telco applications Head-end location for CATV applications Termination of interconnect cables at entry or intermediate cross connects Termination of horizontal cables, cross connection or backbone cables to jumper cables Splice capability with splice trays loaded. Features and Benefits Fits 19-inch and 23-inch racks 1U, 2U, and 4U available Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables* Removable top lid for easy access for 2U products Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides Strain-relief hardward and routing guides help maintain minimum bend radius "D" shaped cutouts at front and rear for easy access of cable Available fully populated with adapters, pigtails and slice trays or unloaded Labeling kit, zip ties and installation screws included Competitive pricing and prompt delivery *Note: Clear front door is not available

ATS-RAC-1x Rack Mount Fiber Optic Enclosure

36 Port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Patch Panel Part No. ATSRAC-1X- Price $97.00
Dimensions: Width = 17'', Depth = 12'', Height = 1.75''
Weight (unloaded): 10.3 lbs.
Port Capacity: 6-36
Features: 1U rackmount can be loaded with up to 3 panels with 6 to 36 port capacity. Reversible mounting bracket for 19'' or 23'' racks. 16-gauge steel with black powder finish coat. Steel door at front and at rear with ¼ turn latches. Top lid removable at both front and rear. Cable management spools in the rear of the enclosure and cable management rings to the front for jumper management. Sliding tray for access to both front and rear. Large entry points at front for easy jumper management, as well as "D" shaped cutouts at rear for access of backbone cable. Accessory pack included with additional cable management, label holders and screws for securing to rack and top panels. Labeling kit included for clear and precise identification of ports.
Lead time: In Stock, Immediate Shipment

ATS 19” Rack Mount Fiber Optic Enclosure

 Features and Benefits

• Fits 19-inch and 23-inch racks
• 1U, 2U, and 4U available
• Durable, clear front door for easy viewing of the interior; removable blackboard for easy access to terminated cables*
• Removable top lid for easy access for 2U products
• Front plexi-glass and rear steel doors with 1/4 turn latches to allow easy access from both sides
• Strain-relief hardward and routing guides help maintain minimum bend radius
• "D" shaped cutouts at front and rear for easy access of cable
• Available fully populated with adapters, pigtails and slice trays or unloaded
• Labeling kit, zip ties and installation screws included
• Competitive pricing and prompt delivery

Part No. ATSRAC-12-OP ATS19" 12 Port Rack Mount Enclosure, Holds 2 ( 6 Packs ) Price $ 56.00

Part No. ATSRAC-24-OP ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 75.00

New is a ATS-RS24 and ATS F1-RS72 rack mount splice and termination enclosure. Allows for patching on top and convenient organization of splice trays in the bottom shelf. Both 24 and 72 patch and splice versions are available. Call ATS at (866) 342-3721 to order in black 16 gauge steel. .

• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATS at (866) 342-3721 to order in black 16 gauge steel.

Part No. ATSRS-24 ATS 19" 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ) Price $ 189.00 each

Part No. ATSRS ATS 72 Port Rack Patch & Splice Enclosure ) Price $ 270.00 each

 

The ATS Rack Mount Enclosure is designed for low or high density patching applications. This sturdy 16 gauge aluminum rack enclosure is available in 24, 48, 72, 96 and 144 port versions in standard beige. This unit provides a lift-off door with front and back access to the slideout tray. The ATS Rack Mount Enclosure features a smoked Lexan front door. Call ATS at 1-866-342-3721 to order in black 16 gauge steel.

• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATS at (866) 342-3721 to order in black 16 gauge steel.ATS-F1RM144X - 144 Port Rack Mount Enclosure, unloaded, holds 24 six packs, 13 1/2"D x 17 1/8"W x 15"H, 19lbs.  
• ATS-F1RM24XA - 24 Port Rack Mount Enclosure, unloaded, holds 4 six packs, 13 1/4"D x 17 1/8"W x 3 1/2"H, 12lbs.
• ATS-F1RM48X - 48 Port Rack Mount Enclosure, unloaded, holds 6 eight packs, 13 1/4"D x 17 1/8"W x 4 3/4"H, 14lbs.
• ATS-F1RM72X - 72 Port Rack Mount Enclosure, unloaded, holds 12 six packs, 13 1/4"D x 17 1/8"W 7 1/8"H, 17lbs.

Part No. ATS-F1RM144X- ATS 144 Port Rack Mount Enclosure, Holds 24 ( 6 Packs ) Price $ 245.00 each

Part No. ATS-F1RM24XA -ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 99.00 each Part No. ATS-F1RM48X- ATS 48 Port Rack Mount Enclosure, Holds 6 ( 8 Packs ) Price $ 112.00 each

Part No.ATS-F1RM72X ATSATS 72 Port Rack Mount Enclosure, Holds 12 ( 6 Packs ) Price $170.00 each

------------------------ FIS24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ---- --

24 port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Optic Patch Panel Part No. ATSRAC-12X-Price $96.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-24
Features: 2U rackmount can be loaded with 2 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

48 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATSRAC-24X- Price $100.50
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-48
Features: 2U rackmount can be loaded with 4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

72 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATS RAC-2X- Price $105.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-72
Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Sliding tray for high-density situations. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

144 Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X Price- $173.25
Dimensions: Width = 17'', Depth = 12'', Height = 7''
Weight (unloaded): 11.5 lbs.
Port Capacity: 6-144
Features: 4U enclosure can be loaded with 12 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder finish coat.
Lead time: In Stock, Immediate Shipment

AFL Fiber Closures

Aerial Weather-Tight Splice Closures

Sealed Fiber Splice Closures

Adapter Plates

Fiber Optic Closures

Fiber Optic Tight Splice Trays

Fiber Optic Storage Units

 

 

 

 

ATS Carries A Complete Range Of Fiber Optical Enclosures-Fiber Distribution Enclosures-Optical Entrance Enclosures

AFL-LL-400b Optical Splicing Enclosures	AFL-LL-400b Pedestal Optical Splicing Enclosures	AFL-LL-500b Optical Splicing & Distribution Enclosures	AFL- Optical Entrance Enclosures	ICC Fiber Optic Enclosures	Lan Racks	Outside Plant Fiber Enclosures Click Here

Due to Rapidly fluctuating Wholesale Metal and Commodity Costs-The Following Fiber Optic Enclosure Prices Are Suggested List Prices Only! Please Call To Get Your Discount At (866) 342-3721

ATS Part Number	Type Fiber Optic Enclosure	Fiber Optic EnclosuresFiber Optic Patch Panels	List
		Description	Price
ATSRAC-2X-EXT	Rack Mount Fiber Optic Enclosure	2U, 6-Panel, EXTENDED TO 15"	$204.85
ATSRAC-36X	Rack Mount Fiber Optic Enclosure	2U, 6-Panel, w/Sliding Tray	$220.35
ATSRAC-4X	Rack Mount Fiber Optic Enclosure	4U, 12-Panel	$251.72
ATSRAC-4X-EXT	Rack Mount Fiber Optic Enclosure	4U, 12-Panel, EXTENDED TO 15 "	$298.19
ATSRAC-8X-EXT	Rack Mount Fiber Optic Enclosure	8U, 24-Panel, EXTENDED TO 15 "	$576.39
ATSDMAX-1X-EN	Sliding Rack Mount Fiber Optic Enclosure	1U, Black, 3 Panel, No Adapters	$235.63
ATSDMAX-1X-EN-X-LOUM-12	Sliding Rack Mount Fiber Optic Enclosure	1U, Black, 12-Port, Duplex, LC, Aqua	$339.94
ATSDMAX-1X-EN-X-LOUM-16	Sliding Rack Mount Fiber Optic Enclosure	1U, Black, 16-Port, Duplex, LC, Aqua	$371.55
ATSDMAX-1X-EN-X-LOUM-32	Sliding Rack Mount Fiber Optic Enclosure	1U, Black, 32-Port, Duplex, LC, Aqua	$495.40
ATSDMAX-2X-EN-C	Sliding Rack Mount Fiber Optic Enclosure	2U, Black, 3 Panel, No Adapters, w/Wire Management	$322.99
ATSDMAX-2X-EN-X-LOUM-12-C	Sliding Rack Mount Fiber Optic Enclosure	2U, Black, 12-Port, Duplex, LC, Aqua w/Wire Management	$415.23
ATSDMAX-2X-EN-X-LOUM-16-C	Sliding Rack Mount Fiber Optic Enclosure	2U, Black, 16-Port, Duplex, LC, Aqua w/Wire Management	$446.84
ATSDMAX-2X-EN-X-LOUM-32-C	Sliding Rack Mount Fiber Optic Enclosure	2U, Black, 32-Port, Duplex, LC, Aqua w/Wire Management	$570.69
ATSDMAX-4X-EN	Rack Mount Fiber Optic Enclosure	4U, Black, 12 Panel, No Adapters	$35.00
ATSWAC-1X	Wall Mount Fiber Optic Enclosure	1 Panel	$71.39
ATSWAC-2X	Wall Mount Fiber Optic Enclosure	2 Panel	$79.64
ATSWAC-2X-EXT	Wall Mount Fiber Optic Enclosure	2 Panel, Larger storage area	$113.73
ATSWAC-4X	Wall Mount Fiber Optic Enclosure	4 Panel	$95.79
ATSWAC-8X	Wall Mount Fiber Optic Enclosure	8 Panel	$199.25
ATS300-360-028	Wire Managament	1U, Black, 4-ring, Left and Right Pass Thru	$87.27
ATS300-360-029	Wire Managament	2U, Black, 4-ring, Left and Right Pass Thru	$95.61
ATS300-360-030	Wire Managament	2U, Black, 4-ring, Left and Right Pass Thru w/Rear Tray	$101.36

ATSEn Part No. DMAX-1X-EN-X-LOUM-16 - 16 Port LC Fiber Optic Rack Enclosure
Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 16 Duplex LC Ports (32 Fiber Capacity)

ATSEnPart No. DMAX-1X-EN-X-LOUM-16-C- 16 Port LC Fiber Optic Rack Enclosure
Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 16 Duplex LC Ports (32 Fiber Capacity) with Wire Management
ATSEnPart No. DMAX-1X-EN-X-LOUM-32 - 32 Port Fiber Optic Rack Enclosure
Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 32 Duplex LC Ports (64 Fiber Capacity)

ATSEnPart No. DMAX-1X-EN-X-LOUM-32-C- 32 Port LC Rack Mount Enclosure
Features: 1U Data Center Enclosure, Sliding Rack Mount, Black, 32 Duplex LC Ports (64 Fiber Capacity) with Wire Management

ATSEnPart No. DMAX-1X-EN
Features: 1U Data Center Enclosure, Sliding Rack Mount, 1U Black, Supports 3 AP Series Standard Faceplates or Cassettes

ATSEnPart No. DMAX-1X-EN-C- FiberOptic Enclosure
Features: 1U Data Center Enclosure, Sliding Rack Mount, 1U Black, Supports 3 AP Series Standard Faceplates or Cassettes with Wire Management

ATS-RAC-1x Rac Mount Fiber Optic Enclosure

36 Port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Patch Panel Part No. ATSRAC-1X- Price $97.00
Dimensions: Width = 17'', Depth = 12'', Height = 1.75''
Weight (unloaded): 10.3 lbs. Port Capacity: 6-36
Features: 1U rackmount can be loaded with up to 3 panels with 6 to 36 port capacity. Reversible mounting bracket for 19'' or 23'' racks. 16-gauge steel with black powder finish coat. Steel door at front and at rear with ¼ turn latches. Top lid removable at both front and rear. Cable management spools in the rear of the enclosure and cable management rings to the front for jumper management. Sliding tray for access to both front and rear. Large entry points at front for easy jumper management, as well as "D" shaped cutouts at rear for access of backbone cable. Accessory pack included with additional cable management, label holders and screws for securing to rack and top panels. Labeling kit included for clear and precise identification of ports.
Lead time: In Stock, Immediate Shipment

Part No. ATSRAC-12-OP ATS19" 12 Port Rack Mount Enclosure, Holds 2 ( 6 Packs ) Price $ 56.00

Part No. ATSRAC-24-OP ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 75.00

• Enclosure is constructed of 16 gauge steel with convenient swivel out base for easy access to fiber optic cables. 
• Call ATS at (866) 342-3721 to order in black 16 gauge steel.

Part No. ATSRS-24 ATS 19" 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ) Price $ 189.00 each

Part No. ATSRS ATS 72 Port Rack Patch & Splice Enclosure ) Price $ 270.00 each

Part No. ATS-F1RM144X- ATS 144 Port Rack Mount Enclosure, Holds 24 ( 6 Packs ) Price $ 245.00 each

Part No. ATS-F1RM24XA -ATS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) Price $ 99.00 each

Part No. ATS-F1RM48X- ATS 48 Port Rack Mount Enclosure, Holds 6 ( 8 Packs ) Price $ 112.00 each

Part No.ATS-F1RM72X ATSATS 72 Port Rack Mount Enclosure, Holds 12 ( 6 Packs ) Price $170.00 each

------------------------ FIS 24 Port Rack Mount Enclosure, Holds 4 ( 6 Packs ) ---- --

24 port Rack Mount Fiber Optic Enclosure- Rack Mount Fiber Optic Patch Panel Part No. ATSRAC-12X-Price $96.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-24
Features: 2U rackmount can be loaded with 2 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

48 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATSRAC-24X- Price $100.50
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-48
Features: 2U rackmount can be loaded with 4 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

72 Port Rack Mount Fiber Optic Enclosure- Rack Mount Patch Panel Part No. ATS RAC-2X- Price $105.00
Dimensions: Width = 17'', Depth = 12'', Height = 3.5''
Weight (unloaded): 12 lbs.
Port Capacity: 6-72
Features: 2U rackmount can be loaded with 6 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extension brackets for 23'' rack. 16-gauge steel with black powder finish coat. Removable top lid for easy access to fiber. Sliding tray for high-density situations. Spools at the rear for neat and clean cable management.
Lead time: In Stock, Immediate Shipment

144 Port Rack Mount Enclosure- Rack Mount Fiber Patch PanelPart No. RAC-4X Price- $173.25
Dimensions: Width = 17'', Depth = 12'', Height = 7''
Weight (unloaded): 11.5 lbs.
Port Capacity: 6-144
Features: 4U enclosure can be loaded with 12 panels (6-, 8- or 12-fiber panels). 19'' rack-mountable enclosure available with extensions for 23'' racks. 16-gauge steel with corrosion-resistant black powder finish coat.
Lead time: In Stock, Immediate Shipment

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATS WAC-1X
Dimensions: Width = 6.5'', Depth = 1.5'', Height = 7''
Weight (unloaded): 2.1 lbs.
Features: Fiber Optic Wall Mount Enclosure- Pact Panel.Wall-mount enclosure accommodates 1 adapter panel (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with small pad lock. Entry point at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

------------------------------------

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

144 Port Fiber Optic Enclosure- Fiber Optic Patch Panel

Part No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.

--------

Wall Mount Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-2X
Dimensions: Width = 13'', Depth = 3.6'', Height = 9.2''
Weight (unloaded): 6.85 lbs.
Features: Wall-mount enclosure accommodates 2 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-4X
Dimensions: Width = 13'', Depth = 3.5'', Height = 11.5''
Weight (unloaded): 7.95 lbs.
Features: Wall-mount enclosure accommodates 4 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall-mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without unwanted handling of fiber optic cables. Side swing door allows user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

Fiber Optic Enclosure- Fiber Optic Patch Panel Part No. ATSWAC-8X
Dimensions: Width = 17'', Depth = 5.87'', Height = 12.2''
Weight: 12.7 lbs.
Features: Wall-mount enclosure accepts 8 panels (6-, 8- or 12-fiber panels). 16-gauge steel with corrosion-resistant black powder finish coat. When closed, wall mount is lockable with a 1'' keyed barrel lock. Grommets at the top and bottom allow user to enter main enclosure without allowing any unwanted handling of fiber optic cables. Side swing doors allow user to run jumper cable assemblies to final destination. Spools and cable tie down bracket included on the inside compartment.
Lead time: In Stock, Immediate Shipment

144 Port Fiber Optic Enclosure- Fiber Optic Patch Panel

Part No. ATSWAC-12X-H-06-144- Same as ATSWAC-8X- but can accomodate 144 fibers. You can now load up the 144 Count Fiber Patch Panel with SC-ST- or whatever combination adapters you need. Ideal for tying in large count fiber cable from the "street" and using this panel as a distribution panel- leading into the building network.

ATS "Six" Packs

Available are ATS adapter panels with pigtails for splicing.  This kit includes 1, 6, or 8 pack loaded adapter panel with pigtails.  Connector styles are indicated and standard length of pigtails are 3 meters.  Pigtails are TIA-568-A color coded.  Contact your ATS sales associate at 1-866-342-3721 for custom adapter/pigtail kits.

Singlemode Six Pack Kits - 3 meters

• ATSP6SCSM - (1) SC SM 6 pack with 6 SC/UPC pigtails
• ATSP6FCSM - (1) FC SM 6 pack with 6 FC/UPC pigtails
• ATSP6STSM - (1) ST SM 6 pack with 6 ST/UPC pigtails
• ATSP8SCSM - (1) SC SM 8 pack with 8 SC/UPC pigtails
• ATSP6DSCSM - (1) Duplex SC SM 6 pack with 12 SC/UPC pigtails

Multimode Six Pack Kits - 3 meters

• ATSP6SCMM  - (1) SC MM 6 pack with 6 SC pigtails
• ATSP8SCMM - (1) SC MM 8 pack with 8 eight SC pigtails
• ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

ATSP6SCSM-1-SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price$ 160.00

ATS-P6STSM-1-SC Multimode 6 Pack with 6-SC/UPC Pigtails Price $ 50.00

ATSP8SCSM-1-SC Singlemode 6 Pack with 6-SC/UPC Pigtails Price $ 81.00

ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00

ATSP8SCMM-1-ST Singlemode 6 Pack with 6-ST/UPC Pigtails Price $ 82.00

ATSP6STMM-1-SC Singlemode 8 Pack with 8-SC/UPC Pigtails Price $ 99.00

ATS Snap Six- Packs For Distribution Frames

These pre-terminated adapter panels provide convenience to technicians splicing into fiber distribution frames.  Available in 6 or 12 fiber bundles with TIA-598-A standard color code, these bundled fibers provide cable management from patchpanel to splice bays. Standard 3 meters. Contact ATSat 1-866-342-3721 for custom lengths and different connector style adapter panels

Singlemode Six Pack- Eight Pack Kits - 3 meters

• ATSC6LSSP - (6) adapters, SC/UPC, 6 fiber pigtail, SM, 3 meters
• ATSSC6LSSP - (6) duplex adapters, SC/UPC, 12 fiber pigtail, SM, 3 meters
• ATSC6APCSP - (6) adapters, SC/APC, 6 fiber pigtail, SM, 3 meters
• ATSC6DLSP - (6) duplex adapters, LC/UPC, 12 fiber pigtail, SM, 3 meters
• ATST6LSSP - (6) duplex adapters, ST, 12 fiber pigtail, SM, 3 meters

• Multimode Six Pack- 8 Pack Kits - 3 meters
• ATSC6LMSP - (6) duplex adapters, SC, 12 fiber pigtail, MM, 3 meters
• ATSP6STMM - (1) ST MM 6 pack with 6 ST pigtails

PRICING:

ATSC6LSSP - 1 SC Duplex Singlemode 6 Pack with 12-SC/UPC Pigtails Price $ 190.70 each

ATSC6APCSP - 1 SC Singlemode 6 Pack with SC/APC Pigtails Price $ 95.50 each

ATSC6DLSP - 1-LC Duplex Singlemode 6 Pack with 12-LC/APC Pigtails Price $ 190.70 each

ATSP6SCMM-1-ST Multimode 6 Pack with 6-ST/PC Pigtails $ 47.00

ATST6LSSP-1ST Multimode 6 Pack with 6 ST/PC Pigtails$ 86.00 each

ATST6LSMP -1 -ST Multimode 6 Pack with 6 ST/PC Pigtails Price $ 58.00 each

Pricing For Six Pack-8 Pack Plates For Wall & Rack Mount Fiber Optic Enclosures

Fiber Optic Enclosure Pricing

Alcoa Fiber Closures

Splice Closures are designed to simplify splice management. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant. Closures are designed and tested to Telcordia™ GR-771 requirements and Rural Utilities Service (RUS) listed.he AFL family of Aerial Weathertight Splice Closures is designed to provide a cost-effective solution for your aerial splicing needs. Quality engineering reduces the installation time, training and complexity associated with fiber splicing in the field. The closures can be installed without the need for special tools, heat, adhesives, drills, or any powered equipment. Durable and easy to install, these closures will improve productivity, reduce labor expenses and last the life of the plant.

* LG-410
* LG-420
* LG-500
* LG-600

Features:

* Individual, patented, self-sizing cable grommets and strength member tie downs provide for cable additions without disturbing those previously installed
* Unique tongue-in-groove closure seal and back-to-back grommet design provides for a weathertight and insect seal
* Easy to maintain, all aerial closures are re-enterable without the need for any re-entry kits, special tools or sealants
* Designed and tested to Telcordia™ GR-771 aerial weathertight closure requirements
* Rural Utilities Service (RUS) listed

NEMA RATED Outdoor FIBER OPTIC ENCLOSURES We can supply you with a full line of standard and special NEMA rated enclosures and components well suited for Homeland Security Product support. Our own complete fiber-optics product offering can be leveraged in certain cases to minimize lead-time and provide value added solutions in a short time period

West Coast (866) 342-3721-------East Coast (866) 650-DATA

Click on Either Link For Your Needs

-------------------------------------------------

Rack Mount Enclosures------------------------------------------- -Wall Mount Fiber Enclosures

Outdoor FTTH-Fiber Pedestals & Enclosures

Outdoor-Fiber Pedestals & Enclosures

Pedlock BDO Series Pedestals are a key element of any FTTP solution. In both greenfield and brownfield fiber deployments, BDO Pedestals provide easy access to branch and drop splice while protecting and storing loose buffer tube fiber optic cables. The exclusive BDO bracket allows technicians to mount splice trays and splitters securely with ample access to perform in-field splicing.
BDO Pedestals feature a non-metallic construction that offers super OSP protection against floods, fire, dirt, insects and impact. An expanded-capacity split base is designed to easily install around conduit-fed cable bundles in new construction (excludes 14” diameter pedestals). BDO pedestals are an ideal solution for rehabilitation of metallic enclosures, and protection of co-located copper/fiber distribution points. The CMPH is a versatile OSP closure designed for both new provisioning installations as well as rehabilitation of existing access points housed in metallic enclosures. The CMPH’s superior structural strength, outstanding environmental protection and ease of installation combine to create a long-life housing that reduces operational expenses.

A two-piece assembly features a lift-off dome and a corrugated channel base. The lift-off dome allows 360º access to internal working areas and includes self-latching locks with secondary bolt locks on both left and right side panels. The dome provides “bell jar” flood protection, eliminates intrusion of wind-blown rain and dust, and prevents unauthorized entry. The base provides ample room for entry of multiple large cables, including conduit. A spacious bottom entry allows technicians to easily slide the base over existing large cable rehabilitation applications.Internally, the CMPH features a sturdy metal bracket with craft-friendly repositionable splice bars, a cable splice support rail, and a 6-point bonding/grounding bar. The spacious internal working area accommodates copper splices of 1,800 to 3,600 pairs or passive fiber optic equipment (interconnect and splitter). The CMPH is an exceptional protection solution for copper/fiber co-locations.

Main Distribution Frames- Network Bays-Open Bay Systems

Additional Fiber Optic Enclosures

or visit this link for sample pricing Click Here For Fiber Optic Assembly Pricing

home | cables | switches | Contact Us our team | locations