Noyes OPM 4, Noyes OPM 4 Optical Power Meter, Noyes OPM Supplier, Noyes OPM 4 Distributor, Noyes Power Meters, Noyes Multimode Optical Power Meters

Noyes OPM 4- Noyes OPM 4 Optical Power Meter- Noyes OPM Supplie- Noyes OPM 4 Distributor- Noyes Power Meters- Noyes Multimode Optical Power Meters

As a Noyes OPM 4 distributor and Noyes OPM supplier,Atek Communications Carries the complete line of Noyes Optical Power Meters including the OPM 1, OPM 4, OPM 5 and OPM6 Optical Power Meters: We stock the Noyes Fiber Optic Power Meter OPM-4 and the entire line of Noyes Fiber Optic Optical Power Meters.

NOYES OPM 4 Optical Power Meter

Atek Communications Carries the complete line of Noyes Optical Power Meters including the OPM 1, OPM 4, OPM 5 and OPM6 Optical Power Meters: We stock the Noyes Fiber Optic Power Meter OPM-4 and the entire line of Noyes Fiber Optic Optical Power Metersoyes OPM 4 - adds Wave ID and Set Reference

The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.

All OPM 4 models come with a carry case, AA batteries, protective rubber boot, and manual. Optical light sources and optical power meters can be packaged together as a kit.

Features:

Rugged, handheld, lightweight
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave ID - automatic wavelength identification and switching
Passive Optical Networks (PON) testing
Dual Wavelength testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
AA alkaline, optional rechargeable NiMH battery pack
Battery Gauge
N.I.S.T traceable

American Tech Supply Carries the complete line of Noyes Optical Power Meters including the OPM 1, OPM 4, OPM 5 and OPM6 Optical Power Meters: We stock the Noyes Fiber Optic Power Meter OPM-4 and the entire line of Noyes Fiber Optic Optical Power Meters. The Noyes optical power meters have a +25 to -45dB Measurment Range and are calibrated at 850 nm,1310nm, 1550nm and 1625nm for testing multimode and single mode systems. For example the OLS 6 optical light source and OPM 6 optical power meter work together to make dual-wavelength loss testing fast, simple, and accurate. Key features include automatic dual-wavelength testing, simultaneous dual-wavelength loss display, non-volatile memory for up to 500 dual-wavelength loss results, and file management to organize stored results by cable or project. It comes with a soft carry case and instruction card. Adpater caps, required for operation and purchased separately, convert the interface to the required connector style. Power comes from (2) AA batteries or AC adapter.

West Coast (866) 342-3821 ------ -------------------Sales (866) FIBER-21

Noyes OPM 1 - measures optical power in dBm

This portable optical power meter may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 1 can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls - ON/OFF and wavelength - the OPM 1 is our simplest to use optical power meter.

Noyes OPM 4 - adds Wave ID and Set Reference

The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification.

Noyes OPM 5 - adds Wave ID and Data Storage

The OPM 5 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 5 also measures insertion loss of multimode or single-mode cables. The OPM 5 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual, OLS 2 Dual, or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification.

Fiber Optic Test Equipment-Optical Power Meters- Fiber Power Meters

American Tech Supply also carries the completer line of Noyes Fiber Optic Test Equipment-including FC Noyes Backreflection Meters, SC Noyes Backreflection Meters,ST Back Relection Meters,Fiber Optic Laser Sources, Fiber Optic Light Sources, OTDR's. Mini- OTDR's, Optical Power Sources, Fiber Test Kits, Fiber Optic Scopes and Fiber Optic Laser Sources

see our entire NOYES Pricing here

Noyes Back Relection Meters- Call Today-We Carry The Complete Line

(866) FIBER-21 or (833) 342-3721

The Noyes OPM 6-4 Optical Power Meter. InGaAs detector with a +25 to -45dB Measurment Range. Calibrated at 1310, 1550 and 1625nm for testing single mode systems. The OLS 6 optical light source and OPM 6 optical power meter work together to make dual-wavelength loss testing gast, simple, and accurate. Key features include automatic dual-wavelength testing, simultaneous dual-wavelength loss display, non-volatile memory for up to 500 dual-wavelength loss results, and file management to organize stored results by cable or project. It comes with a soft carry case and instruction card. Adpater caps, required for operation and purcahsed separately, convert the interface to the required connector style. Power comes from (2) AA batteries or AC adapter.

Part Number-Description Call ATS Today At (866) FIBER-21 For Discounts

click here to go back to our fiber test page

American Tech Supply Carries A Full Line Of Fiber Optic Test Equipment Products from several leading manufacturers. We have a complete line of Power Meters, Light Sources,OTDR's, Test Kits, Optical Power Meters, Inspection Scopes, and many more.

If you do not see your product listed, please call our sales office for additional information.ATS also carries refurbished fiber optic test equipment at greatly reduced prices. Call us for additional details.

CALL (866) FIBER -21

We carry manufacturers from Advanced Fiber Solutions,Noyes, Fluke, Seikoh Giken, Ideal, Exfo, Perkin Elmer, Ocean Optics and more. We carry a full range of OTDR's, Optical Loss Power Meters, Laser and LED Light Sources,Fiber Optic Splicing Kits, and more. We Have Hundreds Of Fiber Optic Test Equipment Products- Too Many To List Here- If It's Fiber Optic Related Test Equipment- We Have It- For LESS!!

Call (866) FIBER-21 or (866) 650-3282 today and ask for our Monthly Specials

FIBER OPTIC TEST EQUIPMENT
Light Sources-Optical Power Meters-Optical Loss Test Kits-Backreflection Meters-Inspection Scopes-
Identifiers-OTDRs-Network Sims or Pulse Suppressors-Fiber Optic Talk Sets-Interferometers-Reference Cables
Spectrum Analyzers-Fiber Certification Test Kits-Environmental Test Systems--Test Kits-Adapter Caps and much more!

click here to go back to our fiber test page

American Owned and Operated

Monthly Specials

©2002 Atek Communications

Fiber Optic Test Equipment-Optical Power Meters- Fiber Power Meters