Shop By Brand
American Tech Supply Full Catalog
Showing 1–24 of 115296 results
-
Discontinued Products
Type 4X Stainless Steel Two Door Floormount Enclosure HN4 FM SS Series – (HN4FM726012SS) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Two Door Floormount Enclosure HN4 FM SS Series – (HN4FM726012SS) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
Construction
- Formed 12 gauge 304 or 316 stainless steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles.
- Doors are supported with heavy gauge continuous hinges.
- New 3-pt padlocking door handle.
- Seamless poured-in place gasket.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- Center post is removable for easy installation of the inner panel.
- 12″ floor stands are welded to the enclosure.
Standards
- UL 508A Type 3R, 4X and 12
- CSA Type 3R, 4X and 12
- Complies with:
- NEMA Type 3R, 4X, 12 and 13
- IEC 60529, IP66
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
- Removable 10 gauge inner panel is finished in white powder coating.
Accessories
Additional Inner Panels- Door Stop Kit
- Barrier Kits for Type 4 Floormount
- Mechanical Interlock
- Drip Shield Kit
- Type 12/4, 4X Handle Kits
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
304 S.S. 316 S.S. Enclosure Panel Part Number Part Number H W D H W HN4FM604812SS HN4FM604812S16 60.13 48.06 12.69 56.00 44.00 HN4FM604818SS HN4FM604818S16 60.13 48.06 18.69 56.00 44.00 HN4FM606012SS HN4FM606012S16 60.13 60.06 12.69 56.00 56.00 HN4FM606018SS HN4FM606018S16 60.13 60.06 18.69 56.00 56.00 HN4FM726012SS HN4FM726012S16 72.13 60.06 12.69 68.00 56.00 HN4FM726018SS HN4FM726018S16 72.13 60.06 18.69 68.00 56.00 HN4FM727212SS HN4FM727212S16 72.13 72.06 12.69 68.00 68.00 HN4FM727218SS HN4FM727218S16 72.13 72.06 18.69 68.00 68.00 HN4FM727224SS HN4FM727224S16 72.13 72.06 24.69 68.00 68.00 SKU: HN4FM726012SS -
Discontinued Products
(Discontinued) 5000-12000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3265A230N3LG)
Discontinued Products(Discontinued) 5000-12000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3265A230N3LG)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
- Condensor with 3 mm fin spacing, highly effective protection against strongly contaminated and aggressive ambient air.
Standards
- UL, cUL, and CE
- Complies with
- IP56
- NEMA 3R, 4, 4X
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
Accessories
SKU: DTS3265A230N3LG -
Discontinued Products
Air to Air Heat Exchangers – Type 4X PKS4X Series – (PKS3304A230N4SS) (DISCONTINUED)
Discontinued ProductsAir to Air Heat Exchangers – Type 4X PKS4X Series – (PKS3304A230N4SS) (DISCONTINUED)
Description
- Designed for corrosive outdoor or washdown applications.
- Air to air heat exchangers provide superior technology when there is a lower surrounding air temperature compared to the target internal temperature (difference of at least 10°C/18°F).
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Superior energy efficiency and lower maintenance costs versus air conditioners.
Standards
- Maintains enclosure’s NEMA 4X rating
- IP 56
- UR, cUR and CE
Features
- Compact Standard Size: 35″H x 12″W x 16″D (louvers extend 1.5″ on either side)
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- EMI/RFI suppression meets CE.
- Door contact provision for power down when enclosure door is opened.
- Gasket, mounting kit and template for cutout and drilling are included.
- Can be mounted vertically or horizontally for application flexibility.
- Cover finished in unpainted 304 stainless steel
- See Manual/Technical Data Sheet for drilling template and full electrical specifications.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Cooling Capacity Dimensions Sample Performance Part No. Voltage – Frequency W/°C W/°F H W D ΔT = 20°C/36°F PKS3134A115N4SS 115V 60 Hz 65 36 35.30 11.97 16.04 1300W (4400 BTU) PKS3134A230N4SS 230V 50/60 Hz 65 36 35.30 11.97 16.04 1300W (4400 BTU) PKS3134A460N4SS 400/460V 50/60 Hz 65 36 35.30 11.97 16.04 1300W (4400BTU) PKS3204A115N4SS 115V 60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3204A230N4SS 230V 50/60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3204A460N4SS 400/460V 50/60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3304A115N4SS 115V 60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3304A230N4SS 230V 50/60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3304A460N4SS 400/460V 50/60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3364A115N4SS 115V 60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) PKS3364A230N4SS 230V 50/60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) PKS3364A460N4SS 400/460V 50/60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) SKU: PKS3304A230N4SS -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PJW Series – (PJW603614L3PT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Wallmount Enclosure PJW Series – (PJW603614L3PT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X,12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- 3/8 collar studs are provided for optional inner panel mounting, hardware included. Note: Sizes 36×36″ and larger have 8 collar studs for added stiffness.
- Stainless steel butterfly type “twist latch” door fasteners with padlock provision.
- Captive oil resistant gasket provides a positive seal.
- Integrated mounting flange.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Latch 3 Pt Handle Enclosure Optional Inner Panel Part No. Part No. H W D H W Part No. PJEC363012T PJEC3630123PT 36.48 30.50 12.18 33.00 27.00 18P3327 PJEC363012TW PJEC3630123PTW 36.48 30.50 12.18 33.00 27.00 18P3327 PJW363014L PJW363014L3PT 36.25 30.25 14.13 33.00 27.00 18P3327 PJW363610L PJW363610L3PT 36.25 36.25 10.13 33.00 33.00 18P3333 PJW363614L PJW363614L3PT 36.25 36.25 14.13 33.00 33.00 18P3333 PJW483610L PJW483610L3PT 48.25 36.25 10.13 45.00 33.00 18P4533 PJW483614L PJW483614L3PT 48.25 36.25 14.13 45.00 33.00 18P4533 PJW603610L PJW603610L3PT 60.25 36.25 10.13 57.00 33.00 18P5733 PJW603614L PJW603614L3PT 60.25 36.25 14.13 57.00 33.00 18P5733 SKU: PJW603614L3PT -
Discontinued Products
(Discontinued) 5000-12000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3185A230N4SS)
Discontinued Products(Discontinued) 5000-12000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3185A230N4SS)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
- Condensor with 3 mm fin spacing, highly effective protection against strongly contaminated and aggressive ambient air.
Standards
- UL, cUL, and CE
- Complies with
- IP56
- NEMA 3R, 4, 4X
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
Accessories
SKU: DTS3185A230N4SS -
Discontinued Products
(Discontinued) 4000-7000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3181A460N4SS)
Discontinued Products(Discontinued) 4000-7000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3181A460N4SS)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
Standards
- UL, cUL, CE
- Complies with
- IP56
- NEMA 3R, 4, 4X
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Expansion valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
- Nema 4/4x exterior 304 stainless steel.
Accessories
SKU: DTS3181A460N4SS -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PJW Series – (PJW483614L3PT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Wallmount Enclosure PJW Series – (PJW483614L3PT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X,12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- 3/8 collar studs are provided for optional inner panel mounting, hardware included. Note: Sizes 36×36″ and larger have 8 collar studs for added stiffness.
- Stainless steel butterfly type “twist latch” door fasteners with padlock provision.
- Captive oil resistant gasket provides a positive seal.
- Integrated mounting flange.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Latch 3 Pt Handle Enclosure Optional Inner Panel Part No. Part No. H W D H W Part No. PJEC363012T PJEC3630123PT 36.48 30.50 12.18 33.00 27.00 18P3327 PJEC363012TW PJEC3630123PTW 36.48 30.50 12.18 33.00 27.00 18P3327 PJW363014L PJW363014L3PT 36.25 30.25 14.13 33.00 27.00 18P3327 PJW363610L PJW363610L3PT 36.25 36.25 10.13 33.00 33.00 18P3333 PJW363614L PJW363614L3PT 36.25 36.25 14.13 33.00 33.00 18P3333 PJW483610L PJW483610L3PT 48.25 36.25 10.13 45.00 33.00 18P4533 PJW483614L PJW483614L3PT 48.25 36.25 14.13 45.00 33.00 18P4533 PJW603610L PJW603610L3PT 60.25 36.25 10.13 57.00 33.00 18P5733 PJW603614L PJW603614L3PT 60.25 36.25 14.13 57.00 33.00 18P5733 SKU: PJW483614L3PT -
Discontinued Products
(Discontinued) 5000-12000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3165A230N3LG)
Discontinued Products(Discontinued) 5000-12000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3165A230N3LG)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
- Condensor with 3 mm fin spacing, highly effective protection against strongly contaminated and aggressive ambient air.
Standards
- UL, cUL, and CE
- Complies with
- IP56
- NEMA 3R, 4, 4X
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
Accessories
SKU: DTS3165A230N3LG -
Discontinued Products
(Discontinued) 4000-7000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3161A230N3LG)
Discontinued Products(Discontinued) 4000-7000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3161A230N3LG)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
Standards
- UL, cUL, CE
- Complies with
- NEMA 3R, 4
- IP56
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Expansion valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
- Nema 3R/4 exterior galvanized sheet steel with powdercoat finish.
Accessories
SKU: DTS3161A230N3LG -
Discontinued Products
(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTT Series – (DTT6301B460LG)
Discontinued Products(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTT Series – (DTT6301B460LG)
Description
- Designed for top mounting where space limitations do not allow side mounting on the enclosure surface.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Excellent security level due to patented condensate management system, which prevents condensate from penetrating the enclosure.
- High reliability and long maintenance intervals
Standards
- Maintains NEMA 12 rating
- IP 54
- UR, cUR and CE
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
- Mounting via tool-less sash fasteners
Accessories
SKU: DTT6301B460LG -
Discontinued Products
(Discontinued) 4000-7000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3161A115N3LG)
Discontinued Products(Discontinued) 4000-7000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3161A115N3LG)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
Standards
- UL, cUL, CE
- Complies with
- NEMA 3R, 4
- IP56
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Expansion valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
- Nema 3R/4 exterior galvanized sheet steel with powdercoat finish.
Accessories
SKU: DTS3161A115N3LG -
Discontinued Products
(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTT Series – (DTT6301B230LG)
Discontinued Products(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTT Series – (DTT6301B230LG)
Description
- Designed for top mounting where space limitations do not allow side mounting on the enclosure surface.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Excellent security level due to patented condensate management system, which prevents condensate from penetrating the enclosure.
- High reliability and long maintenance intervals
Standards
- Maintains NEMA 12 rating
- IP 54
- UR, cUR and CE
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
- Mounting via tool-less sash fasteners
Accessories
SKU: DTT6301B230LG -
Discontinued Products
(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTT Series – (DTT6301B115LG)
Discontinued Products(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTT Series – (DTT6301B115LG)
Description
- Designed for top mounting where space limitations do not allow side mounting on the enclosure surface.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Excellent security level due to patented condensate management system, which prevents condensate from penetrating the enclosure.
- High reliability and long maintenance intervals
Standards
- Maintains NEMA 12 rating
- IP 54
- UR, cUR and CE
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
- Mounting via tool-less sash fasteners
Accessories
SKU: DTT6301B115LG -
Discontinued Products
(Discontinued) 3000-5000 BTU/H Indoor Slimline Air Conditioner DTS SL Series – (DTS3141SLA230LG)
Discontinued Products(Discontinued) 3000-5000 BTU/H Indoor Slimline Air Conditioner DTS SL Series – (DTS3141SLA230LG)
Description
- Narrow design for side mounting on any enclosure surface where hot spot or low capacity cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
Standards
- Maintains NEMA 12 rating
- IP 54
- UL, cUL and CE
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Expansion valve increases efficiency with improved evaporator heat transfer and less frequent compressor operation.
- Built in condensor/evaporator
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Door contact for power down when enclosure door is opened.
- Gasket, mounting kit and template for cutout and drilling are included.
- Condensate drain hose and clamp.
Accessories
SKU: DTS3141SLA230LG -
Discontinued Products
(Discontinued) 2000-3000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3081A115N4SS)
Discontinued Products(Discontinued) 2000-3000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3081A115N4SS)
Description
- Compact design for side mounting on any enclosure surface where spot cooling or low capacity cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Ideal for outdoor or very wet conditions.
Standards
- UL, cUL, and CE
- Complies with
- IP56
- NEMA 3R, 4, 4X
Features
- Stainless steel body.
- R134a refrigerant.
- Thermostat control.
- Line cord with plug (115 V).
- Expansion valve permits increased efficiency through improved evaporator heat transfer and less frequent compressor operation.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE standard.
- Gasket, mounting kit, and template for cutout and drilling are included.
- Direct condensate discharge, drain hose and clamp 1/2″ barb connection.
Accessories
SKU: DTS3081A115N4SS -
Discontinued Products
Type 4X Stainless Steel Wallmount Enclosure w/ Sloped Top ST SS Series – (ST483616SS) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Enclosure w/ Sloped Top ST SS Series – (ST483616SS) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Sloped top prevents water from resting on top as well as providing potential for controls mounting.
- Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- Complies with
- NEMA 3R, 4, 4X, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge 304 stainless steel.
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
- Hinges are 304 stainless.
- Stainless steel hinge pins and quarter turns.
- Door alignment guide provided on 36″ wide enclosures.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
Accessories
- Additional Inner Panels
- Swing Panel
- Swing Frame
- Eclipse DIN Rail Mounting Kit
- Eclipse DIN Rails
- Door Stop Kit
- Mounting Foot Kit
- Rear Hole Plugs
- Drip Shield Kit
- Quarter Turn Inserts and Keys
- Quarter Turn Assemblies
- Padlock Adaptor
- Handles
- Replacement Hinge Pins
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H1 H2 W D Part No. H W ST161208SS 16.00 18.89 12.00 8.00 EP1612 14.20 10.20 ST161608SS 16.00 18.89 16.00 8.00 EP1616 14.20 14.20 ST201608SS 20.00 22.89 16.00 8.00 EP2016 18.20 14.20 ST202008SS 20.00 22.89 20.00 8.00 EP2020 18.20 18.20 ST242008SS 24.00 26.89 20.00 8.00 EP2420 22.20 18.20 ST242408SS 24.00 26.89 24.00 8.00 EP2424 22.20 22.20 ST302408SS 30.00 32.89 24.00 8.00 EP3024 28.20 22.20 ST303008SS 30.00 32.89 30.00 8.00 EP3030 28.20 28.20 ST363008SS 36.00 38.89 30.00 8.00 EP3630 34.20 28.20 ST201612SS 20.00 24.35 16.00 12.00 EP2016 18.20 14.20 ST202012SS 20.00 24.35 20.00 12.00 EP2020 18.20 18.20 ST242412SS 24.00 28.35 24.00 12.00 EP2424 22.20 22.20 ST302412SS 30.00 34.35 24.00 12.00 EP3024 28.20 22.20 ST363012SS 36.00 40.35 Yoast SEO Premium
Product data
SKU: ST483616SS -
Discontinued Products
3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A230N4LG) (DISCONTINUED)
Discontinued Products3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A230N4LG) (DISCONTINUED)
Description
- Designed to use various water sources to cool enclosures where ambient conditions involve high temperatures, harsh conditions or are subject to frequent wash-down.
Standards
- UL, cUL, and CE
- Complies with
- NEMA 3R, 4, 4X
Features
- Compatible with chilled water/glycol, tower water and other circulated coolants
- Integrated thermostat & solenoid value with alarm contact provides automatic temperature control
- Rugged (10 bar) copper tube / aluminum fin heat exchanger with 1/2″ barb connection
- Side, door or internal mounting provides complete installation flexibility
- Low noise, maintenance-free design
- Exterior case, galvanized steel construction finish RAL7035 Light Gray
Accessories
SKU: PWS7332A230N4LG -
Discontinued Products
3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A115N4LG) (DISCONTINUED)
Discontinued Products3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A115N4LG) (DISCONTINUED)
Description
- Designed to use various water sources to cool enclosures where ambient conditions involve high temperatures, harsh conditions or are subject to frequent wash-down.
Standards
- UL, cUL, and CE
- Complies with
- NEMA 3R, 4, 4X
Features
- Compatible with chilled water/glycol, tower water and other circulated coolants
- Integrated thermostat & solenoid value with alarm contact provides automatic temperature control
- Rugged (10 bar) copper tube / aluminum fin heat exchanger with 1/2″ barb connection
- Side, door or internal mounting provides complete installation flexibility
- Low noise, maintenance-free design
- Exterior case, galvanized steel construction finish RAL7035 Light Gray
Accessories
SKU: PWS7332A115N4LG -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PHW Series – (PHW242410) (DISCONTINUED)
Application
- These enclosures are specially designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors.
- For use where corrosion resistant watertight enclosures are needed to provide protection against windblown dust and rain, splashing and hose directed water.
Standards
- UL 508A 1, 3, 3R, 4, 4X, 12
- CSA 1, 3, 3R, 4, 4X, 12
- Complies with
- NEMA 1, 3, 3R, 4, 4X, 12
- IEC 60529, IP 66
Construction
- Compression molded, fiberglass reinforced polyester.
- Memory retaining, continuous door gasket standard.
- Molded in panel mounting inserts (except where noted).
- Integral mounting feet.
- Stainless steel hardware.
- Padlocking provision.
- Stainless steel butterfly type “twist latch” door fasteners.
- Ported with a continuous hinge.
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass reinforced material is finished in light gray.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D H W Part No. PHW20166 22.75 16.87 7.77 17.00 13.00 18P1713 PHW30247 33.41 26.32 8.81 27.00 21.00 18P2721 PHW20168 22.75 16.87 9.77 17.00 13.00 18P1713 PHW24208 27.00 21.24 9.90 21.00 17.00 18P2117 PHW30208 32.86 20.99 9.89 27.00 17.00 18P2717 PHW201610 22.75 16.87 11.77 17.00 13.00 18P1713 PHW241210 26.95 13.72 11.99 21.00 9.00 18P2109 PHW242410 27.00 25.25 11.90 21.00 21.00 18P2121 PHW302010 32.86 20.99 11.89 27.00 17.00 18P2717 PHW302410 33.41 26.32 11.95 27.00 21.00 18P2721 PHW363010 39.31 32.50 12.05 33.00 27.00 18P3327 PHW201612 22.75 16.87 13.77 17.00 13.00 18P1713 PHW302412 33.41 26.32 13.79 27.00 21.00 18P2721 PHW363012 39.31 32.50 14.05 33.00 27.00 18P3327 PHW483616 51.29 36.62 17.93 45.00 33.00 18P4533 PHW603616 63.50 36.50 18.12 57.00 33.00
…Product data
SKU: PHW242410 -
Discontinued Products
Type 4 Mild Steel Wallmount Disconnect Enclosure Eclipse Series – (EN4DSC603812GY) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Disconnect Enclosure Eclipse Series – (EN4DSC603812GY) (DISCONTINUED)
Application
- Designed to house the following safety disconnect equipment:
- ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers. Cable version for circuit breakers also available.
- Allen Bradley 1494V variable depth flange mounted disconnect switches and circuit breaker operators NEMA 4 rated. Will not accept Allen Bradley 1494F disconnect switches, 1494D circuit breaker operators or 1494V-R1, -R2, or -W2 operating handles).
- Cutler Hammer C361 variable depth flange mounted disconnect switches and C371 circuit breaker operators. Also Flex-Shaft™ handle mechanisms for circuit breakers. Use Cutler Hammer NEMA 4X rated operating handles to maintain NEMA 4X integrity.
- Siemens I-T-E Max-Flex™ flange mounted variable depth handles for disconnect switch and circuit breakers. Use handle for NEMA 4 rating.
- General Electric Type STDA flange handles and variable depth operating mechanisms for disconnect switches and circuit breakers. Also SpectraFlex™ cable operators for circuit breakers.
- Square D Class 9422 disconnect switches with flange mounted variable depth operating mechanisms or cable mechanisms and Class 9422 flange mounted variable depth operating mechanism or cable mechanisms for circuit breakers. SN4SS enclosures will not accept Square D Class 9422 bracket-mounted disconnect devices, 9422TG1 or TG2 devices.
- Refer to the Type 4 Wallmount Selection Guide.
Standards
- UL 508A Type 3R, 4
- CSA Type 3R, 4
- Complies with
- NEMA Type 3R, 4, 12 and 13
- IEC 60529, IP66
- Appropriate components are required to maintain these standards.
Construction
- Formed 14 gauge doors with 16 or 14 (36×32″ and larger) gauge steel.
- Continuously welded seams.
- Larger sizes include door stiffeners.
- Formed lip on door and enclosure exclude flowing liquids and contaminants.
- Cutouts and holes are provided to suit the flange handle operating mechanism.
- Doors may be easily removed for modifications and are interchangeable.
- Door is secured with easily operated 2 or 3-point handle.
- Cover interlock bracket is included on the door.
- Collar studs are provided for mounting inner panels.
- Removable inner panel is sold separately.
- Seamless poured-in place gasket.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Disconnects and operating mechanisms are not provided with the enclosure, and must be ordered separately from the manufacturer.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
Accessories
- Additional Inner Panels
- Door Stop Kit
- Mounting Foot Kit
- Drip Shield Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D Part No. H W EN4DSC20228GY 20.00 22.00 8.00 EP2020 18.17 18.17 EN4DSC24228GY 24.00 22.00 8.00 EP2420 22.17 18.17 EN4DSC24268GY 24.00 26.00 8.00 EP2424 22.17 22.17 EN4DSC30268GY 30.00 26.00 8.00 EP3024 28.17 22.17 EN4DSC36268GY 36.00 26.00 8.00 EP3624 34.17 22.17 EN4DSC36328GY 36.00 32.00 8.00 EP3630 34.17 28.17 EN4DSC423212GY 42.00 32.00 12.00 EP4230 40.17 28.17 EN4DSC423812GY 42.00 38.00 12.00 EP4236 40.17 34.17 EN4DSC483812GY 48.00 38.00 12.00 EP4836 46.17 34.17 EN4DSC603812GY 60.00 38.00 12.00 EP6036 58.17 34.17 SKU: EN4DSC603812GY - Designed to house the following safety disconnect equipment:
-
Discontinued Products
Type 4 Mild Steel Wallmount Enclosure HWHK Series – (HW483616GYHK) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Enclosure HWHK Series – (HW483616GYHK) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
- Ideal for processing plants, utility, outdoor municipal or petro chemical locations where easy yet secure access is required.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA 3R, 4, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge steel bodies and doors.
- Continuously welded seams ground smooth.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Powder coated black zinc diecast pad lockable handle with 3 point roller latching system secures door.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating interior and exterior.
Videos
Accessories
- Additional Inner Panels
- Perforated Inner Panels
- Swing Panel Kit
- Door Stop Kit
- Type 12/4, 4X Handle Kits
- Drip Shield Kit
- Enclosure Stabilizers
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Overall Dimensions Optional Inner Panel Part No. A B C Part No. H W HW24206GYHK 24.00 20.00 6.00 18P2117 21.00 17.00 HW24246GYHK 24.00 24.00 6.00 18P2121 21.00 21.00 HW24168GYHK 24.00 16.00 8.00 18P2113 21.00 13.00 HW24208GYHK 24.00 20.00 8.00 18P2117 21.00 17.00 HW24248GYHK 24.00 24.00 8.00 18P2121 21.00 21.00 HW24308GYHK 24.00 30.00 8.00 18P2721 27.00 21.00 HW30208GYHK 30.00 20.00 8.00 18P2717 27.00 17.00 HW30248GYHK 30.00 24.00 8.00 18P2721 27.00 21.00 HW30308GYHK 30.00 30.00 8.00 18P2727 27.00 27.00 HW36248GYHK 36.00 24.00 8.00 18P3321 33.00 21.00 HW36308GYHK 36.00 30.00 8.00 18P3327 33.00 27.00 HW42368GYHK 42.00 36.00 8.00 18P3933 39.00 33.00 HW48368GYHK 48.00 36.00 8.00 18P4533 45.00 33.00 HW242010GYHK 24.00 20.00 10.00 18P2117 21.00 17.00 HW302410GYHK 30.00 24.00 10.00 18P2721 27.00 21.00 HW362410GYHK 36.00 24.00 10.00 18P3321 33.00 21.00 HW363010GYHK 36.00 30.00 10.00 18P3327 Product data
SKU: HW483616GYHK -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PHW Series – (PHW241210) (DISCONTINUED)
Application
- These enclosures are specially designed to accommodate electrical, electronic, instrumentation and mechanical controls indoors and outdoors.
- For use where corrosion resistant watertight enclosures are needed to provide protection against windblown dust and rain, splashing and hose directed water.
Standards
- UL 508A 1, 3, 3R, 4, 4X, 12
- CSA 1, 3, 3R, 4, 4X, 12
- Complies with
- NEMA 1, 3, 3R, 4, 4X, 12
- IEC 60529, IP 66
Construction
- Compression molded, fiberglass reinforced polyester.
- Memory retaining, continuous door gasket standard.
- Molded in panel mounting inserts (except where noted).
- Integral mounting feet.
- Stainless steel hardware.
- Padlocking provision.
- Stainless steel butterfly type “twist latch” door fasteners.
- Ported with a continuous hinge.
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass reinforced material is finished in light gray.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D H W Part No. PHW20166 22.75 16.87 7.77 17.00 13.00 18P1713 PHW30247 33.41 26.32 8.81 27.00 21.00 18P2721 PHW20168 22.75 16.87 9.77 17.00 13.00 18P1713 PHW24208 27.00 21.24 9.90 21.00 17.00 18P2117 PHW30208 32.86 20.99 9.89 27.00 17.00 18P2717 PHW201610 22.75 16.87 11.77 17.00 13.00 18P1713 PHW241210 26.95 13.72 11.99 21.00 9.00 18P2109 PHW242410 27.00 25.25 11.90 21.00 21.00 18P2121 PHW302010 32.86 20.99 11.89 27.00 17.00 18P2717 PHW302410 33.41 26.32 11.95 27.00 21.00 18P2721 PHW363010 39.31 32.50 12.05 33.00 27.00 18P3327 PHW201612 22.75 16.87 13.77 17.00 13.00 18P1713 PHW302412 33.41 26.32 13.79 27.00 21.00 18P2721 PHW363012 39.31 32.50 14.05 33.00 27.00 18P3327 PHW483616 51.29 36.62 17.93 45.00 33.00 18P4533 PHW603616 63.50 36.50 18.12 57.00 33.00
…Product data
SKU: PHW241210 -
Discontinued Products
Hygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYPB6SS) (DISCONTINUED)
Discontinued ProductsHygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYPB6SS) (DISCONTINUED)
Application
- Designed to pushbuttons and indicators while protecting against harsh, hygienic environments.
- Sloped on 4 sides prevent water from resting on top regardless of enclosure orientation.
- Hex head design screws and door-edge mounted silicone gasket allow for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 12, 4, 4X
- CSA Type 3R, 12, 4, 4X
- NSF – ANSI 169
- Not all accessories shown maintain NSF standard. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 12, 4, 4X
- IEC 60529, IP69, IP69K
Construction
- Formed 304 stainless steel.
- Sloped 3° on all 4 sides
- Continuously welded seams ground smooth.
- Hex head screw cover can be completely removed for modifications.
- Silicone gasket mounts around entire door edge allowing for efficient cleaning in hygienic environments.
- Gasket can be easily removed and re-installed for cleaning or replacement. Additional silicone gaskets can be ordered separately.
- Multiple pushbutton hole configurations with either 22.5mm or 30.5mm notched holes.
- No pre-drilled wall mounting holes allow for flexible mounting alternatives – weld-in-place, stand-offs
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth #4 dairy finish.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
22mm Hole 30mm Hole Enclosure Replacement Part No. Part No. # Holes H W D Gasket HYMPB1SS HYPB1SS 1 7.94 4.88 4.00 HYG85 HYMPB2SS HYPB2SS 2 7.94 4.88 4.00 HYG85 HYMPB3SS HYPB3SS 3 9.94 4.88 4.00 HYG105 HYMPB4VSS HYPB4VSS 4 11.94 4.88 4.00 HYG125 HYMPB4SS HYPB4SS 4 9.94 6.88 4.00 HYG107 HYMPB6SS HYPB6SS 6 11.94 8.88 4.00 HYG129 SKU: HYPB6SS -
Discontinued Products
Hygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYMPB6SS) (DISCONTINUED)
Discontinued ProductsHygienic Type 4X Stainless Steel Pushbutton Enclosure HYPB Series – (HYMPB6SS) (DISCONTINUED)
Application
- Designed to pushbuttons and indicators while protecting against harsh, hygienic environments.
- Sloped on 4 sides prevent water from resting on top regardless of enclosure orientation.
- Hex head design screws and door-edge mounted silicone gasket allow for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 12, 4, 4X
- CSA Type 3R, 12, 4, 4X
- NSF – ANSI 169
- Not all accessories shown maintain NSF standard. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 12, 4, 4X
- IEC 60529, IP69, IP69K
Construction
- Formed 304 stainless steel.
- Sloped 3° on all 4 sides
- Continuously welded seams ground smooth.
- Hex head screw cover can be completely removed for modifications.
- Silicone gasket mounts around entire door edge allowing for efficient cleaning in hygienic environments.
- Gasket can be easily removed and re-installed for cleaning or replacement. Additional silicone gaskets can be ordered separately.
- Multiple pushbutton hole configurations with either 22.5mm or 30.5mm notched holes.
- No pre-drilled wall mounting holes allow for flexible mounting alternatives – weld-in-place, stand-offs
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth #4 dairy finish.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
22mm Hole 30mm Hole Enclosure Replacement Part No. Part No. # Holes H W D Gasket HYMPB1SS HYPB1SS 1 7.94 4.88 4.00 HYG85 HYMPB2SS HYPB2SS 2 7.94 4.88 4.00 HYG85 HYMPB3SS HYPB3SS 3 9.94 4.88 4.00 HYG105 HYMPB4VSS HYPB4VSS 4 11.94 4.88 4.00 HYG125 HYMPB4SS HYPB4SS 4 9.94 6.88 4.00 HYG107 HYMPB6SS HYPB6SS 6 11.94 8.88 4.00 HYG129 SKU: HYMPB6SS
