Shop By Brand
American Tech Supply Full Catalog
Showing 49–72 of 115351 results
-
Discontinued Products
(Discontinued) Deep Hinged Window Kits 1481WDH Series – (1481WDH2016)
Features
- Extra deep kits are designed to provide protection and easy access to components and equipment installed inside an enclosure.
- Frame is 14 gauge mild steel or 316L stainless steel.
- Maintain environmental protection level of enclosure. Painted mild steel maintain Type 4 and 12. Stainless Steel maintain Type 4, 4X and 12.
- Quarter turn latch for easy access.
- 2.5 inches of extra usable depth
- Oil resistant neoprene gasket ensures a watertight seal.
- Hinges can be oriented in any direction.
- Window is 0.25″ thick, UV Resistant Polycarbonate.
- Conveniently sized to allow mounting on the door of any Hammond Wallmount Series enclosure, or in any other Hammond enclosure with a suitable mounting surface.
- Mounting hardware and template are included.
- Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Painted Steel 316 Stainless Steel Overall Dimensions Viewing Area Latch Maximum Part No. Part No. A B C D Qty Cut-Out Size 1481WDH1418¹ 1481WSSDH1418² 12.19 14.56 8.00 9.17 1.00 9.19 11.56 1481WDH1612¹ 1481WSSDH1612² 14.19 8.14 10.00 2.75 1.00 11.19 5.14 1481WDH1620¹ 1481WSSDH1620² 14.19 16.14 10.00 10.75 1.00 11.19 13.14 1481WDH1624¹ 1481WSSDH1624² 14.19 20.14 10.00 14.75 1.00 11.19 17.14 1481WDH2016¹ 1481WSSDH2016² 18.19 12.14 14.00 6.75 1.00 15.19 9.14 1481WDH2024¹ 1481WSSDH2024² 18.19 20.14 14.00 14.75 1.00 15.19 17.14 1481WDH2416¹ 1481WSSDH2416² 22.19 12.14 18.00 6.75 1.00 19.19 9.14 1481WDH2420¹ 1481WSSDH2420² 22.19 16.14 18.00 10.75 1.00 19.19 13.14 1481WDH2430¹ 1481WSSDH2430² 22.19 26.14 18.00 20.75 1.00 19.19 23.14 1481WDH3024¹ 1481WSSDH3024² 28.19 20.14 24.00 14.75 2.00 25.19 17.14 1481WDH3624¹ 1481WSSDH3624² 34.19 20.14 30.00 14.75 2.00 31.19 17.14 SKU: 1481WDH2016 -
Discontinued Products
(Discontinued) Deep Hinged Window Kits 1481WDH Series – (1481WDH1620)
Features
- Extra deep kits are designed to provide protection and easy access to components and equipment installed inside an enclosure.
- Frame is 14 gauge mild steel or 316L stainless steel.
- Maintain environmental protection level of enclosure. Painted mild steel maintain Type 4 and 12. Stainless Steel maintain Type 4, 4X and 12.
- Quarter turn latch for easy access.
- 2.5 inches of extra usable depth
- Oil resistant neoprene gasket ensures a watertight seal.
- Hinges can be oriented in any direction.
- Window is 0.25″ thick, UV Resistant Polycarbonate.
- Conveniently sized to allow mounting on the door of any Hammond Wallmount Series enclosure, or in any other Hammond enclosure with a suitable mounting surface.
- Mounting hardware and template are included.
- Finished in ANSI 61 gray recoatable powder or natural brushed stainless steel.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Painted Steel 316 Stainless Steel Overall Dimensions Viewing Area Latch Maximum Part No. Part No. A B C D Qty Cut-Out Size 1481WDH1418¹ 1481WSSDH1418² 12.19 14.56 8.00 9.17 1.00 9.19 11.56 1481WDH1612¹ 1481WSSDH1612² 14.19 8.14 10.00 2.75 1.00 11.19 5.14 1481WDH1620¹ 1481WSSDH1620² 14.19 16.14 10.00 10.75 1.00 11.19 13.14 1481WDH1624¹ 1481WSSDH1624² 14.19 20.14 10.00 14.75 1.00 11.19 17.14 1481WDH2016¹ 1481WSSDH2016² 18.19 12.14 14.00 6.75 1.00 15.19 9.14 1481WDH2024¹ 1481WSSDH2024² 18.19 20.14 14.00 14.75 1.00 15.19 17.14 1481WDH2416¹ 1481WSSDH2416² 22.19 12.14 18.00 6.75 1.00 19.19 9.14 1481WDH2420¹ 1481WSSDH2420² 22.19 16.14 18.00 10.75 1.00 19.19 13.14 1481WDH2430¹ 1481WSSDH2430² 22.19 26.14 18.00 20.75 1.00 19.19 23.14 1481WDH3024¹ 1481WSSDH3024² 28.19 20.14 24.00 14.75 2.00 25.19 17.14 1481WDH3624¹ 1481WSSDH3624² 34.19 20.14 30.00 14.75 2.00 31.19 17.14 SKU: 1481WDH1620 -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ20168RTW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ20168RTW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “twist latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H W Part No. PJ664RT PJ664RTW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RT PJ864RTW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RT PJ1084RTW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RT PJ1086RTW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RT PJ12106RTW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RT PJ12124RTW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126RT PJ12126RTW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126RT PJ14126RTW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RT PJ16148RTW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RT PJ18168RTW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RT PJ20168RTW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RT¹ PJ24208RTW¹ 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RT¹ PJ24248RTW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RT¹ PJ30248RTW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RT¹ PJ242010RTW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ20168RTW -
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ20168RLW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ20168RLW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Window Enclosure Optional Inner Panel Part No. Cover Part No. H W D H D Part No. PJ664RL PJ664RLW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864RL PJ864RLW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084RL PJ1084RLW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086RL PJ1086RLW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106RL PJ12106RLW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124RL PJ12124RLW 13.33 11.85 4.13 12.32 13.72 14R1111 PJ12126RL PJ12126RLW 13.33 11.85 6.13 12.32 13.72 14R1111 PJ14126RL PJ14126RLW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148RL PJ16148RLW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168RL PJ18168RLW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168RL PJ20168RLW 20.00 16.00 8.13 18.44 14.44 P2068 PJ24208RL PJ24208RLW 24.00 20.00 8.13 21.00 17.00 18P2117 PJ24248RL¹ PJ24248RLW¹ 24.00 24.00 8.13 21.00 21.00 18P2121 PJ30248RL¹ PJ30248RLW¹ 30.00 24.00 8.13 27.00 21.00 18P2721 PJ242010RL¹ PJ242010RLW¹ 24.00 20.00 10.13 21.00 17.00 18P2117 Yoast SEO Premium
Product data
SKU: PJ20168RLW -
Discontinued Products
Type 3R Current Transformer Cabinet HCT Series – (HCT482411H) (DISCONTINUED)
Application
- Designed for use as Current Transformer Cabinet to house and protect instrument current transformers in outdoor applications.
- Can also be used as a general purpose enclosure for various junction, meter, transformer and relay applications..
- Provides protection against rain, sleet, snow and dripping water.
Standards
- UL 50 Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Body and covers formed from 14 gauge galvanized steel (12 gauge for units 30″ and wider)
- Mounting studs for optional inner panels
- Integral drip shield top and seam free sides
- Mounting holes provided through back of enclosure
- Permanently installed lift off hinges
- Removable doors
- Single door design with hasp/screw closure. Double door design with handle.
- Padlocking provisions provided
- ANSI 61 Gray Polyester Powder finish inside and outside
Finish
- Cover and enclosure are phosphatized and finished with a recoatable ANSI 61 smooth Gray powder inside and out.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Type of Enclosure Optional Panel Part No. Door H W D Part No. HCT302411H Single 30.00 24.00 11.00 18P2721 HCT362011H Single 36.00 20.00 11.00 18P3317 HCT363011H Single 36.00 30.00 11.00 18P3327 HCT363611H Single 36.00 36.00 11.00 18P3333 HCT482411H Single 48.00 24.00 11.00 18P4521 HCT483011H Single 48.00 30.00 11.00 18P4527 HCT483611H Single 48.00 36.00 11.00 18P4533 HCT484814H Double 48.00 48.00 14.00 18P4545 SKU: HCT482411H -
Discontinued Products
(Discontinued) Inner Panels 22P Series – (22P6856)
Features
- 22P5038 is formed from 12 gauge steel, all others are 10 gauge steel.
- Panels and mounting hardware are included with 1422 and HN4FM Series enclosures.
- Finished in white.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
SKU: 22P6856 -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ20168TW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJ Series – (PJ20168TW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ20168TW -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ20168LW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJ Series – (PJ20168LW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ20168LW -
Discontinued Products
Type 4 Mild Steel Wallmount Disconnect Enclosure Eclipse Series – (EN4DSC24228GY) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Disconnect Enclosure Eclipse Series – (EN4DSC24228GY) (DISCONTINUED)
Application
- Designed to house the following safety disconnect equipment:
- ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers. Cable version for circuit breakers also available.
- Allen Bradley 1494V variable depth flange mounted disconnect switches and circuit breaker operators NEMA 4 rated. Will not accept Allen Bradley 1494F disconnect switches, 1494D circuit breaker operators or 1494V-R1, -R2, or -W2 operating handles).
- Cutler Hammer C361 variable depth flange mounted disconnect switches and C371 circuit breaker operators. Also Flex-Shaft™ handle mechanisms for circuit breakers. Use Cutler Hammer NEMA 4X rated operating handles to maintain NEMA 4X integrity.
- Siemens I-T-E Max-Flex™ flange mounted variable depth handles for disconnect switch and circuit breakers. Use handle for NEMA 4 rating.
- General Electric Type STDA flange handles and variable depth operating mechanisms for disconnect switches and circuit breakers. Also SpectraFlex™ cable operators for circuit breakers.
- Square D Class 9422 disconnect switches with flange mounted variable depth operating mechanisms or cable mechanisms and Class 9422 flange mounted variable depth operating mechanism or cable mechanisms for circuit breakers. SN4SS enclosures will not accept Square D Class 9422 bracket-mounted disconnect devices, 9422TG1 or TG2 devices.
- Refer to the Type 4 Wallmount Selection Guide.
Standards
- UL 508A Type 3R, 4
- CSA Type 3R, 4
- Complies with
- NEMA Type 3R, 4, 12 and 13
- IEC 60529, IP66
- Appropriate components are required to maintain these standards.
Construction
- Formed 14 gauge doors with 16 or 14 (36×32″ and larger) gauge steel.
- Continuously welded seams.
- Larger sizes include door stiffeners.
- Formed lip on door and enclosure exclude flowing liquids and contaminants.
- Cutouts and holes are provided to suit the flange handle operating mechanism.
- Doors may be easily removed for modifications and are interchangeable.
- Door is secured with easily operated 2 or 3-point handle.
- Cover interlock bracket is included on the door.
- Collar studs are provided for mounting inner panels.
- Removable inner panel is sold separately.
- Seamless poured-in place gasket.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Disconnects and operating mechanisms are not provided with the enclosure, and must be ordered separately from the manufacturer.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
Accessories
- Additional Inner Panels
- Door Stop Kit
- Mounting Foot Kit
- Drip Shield Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D Part No. H W EN4DSC20228GY 20.00 22.00 8.00 EP2020 18.17 18.17 EN4DSC24228GY 24.00 22.00 8.00 EP2420 22.17 18.17 EN4DSC24268GY 24.00 26.00 8.00 EP2424 22.17 22.17 EN4DSC30268GY 30.00 26.00 8.00 EP3024 28.17 22.17 EN4DSC36268GY 36.00 26.00 8.00 EP3624 34.17 22.17 EN4DSC36328GY 36.00 32.00 8.00 EP3630 34.17 28.17 EN4DSC423212GY 42.00 32.00 12.00 EP4230 40.17 28.17 EN4DSC423812GY 42.00 38.00 12.00 EP4236 40.17 34.17 EN4DSC483812GY 48.00 38.00 12.00 EP4836 46.17 34.17 EN4DSC603812GY 60.00 38.00 12.00 EP6036 58.17 34.17 SKU: EN4DSC24228GY - Designed to house the following safety disconnect equipment:
-
Discontinued Products
Type 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ20168RW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Raised Lid (Solid and Window) (DISCONTINUED) PJ Series – (PJ20168RW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″ x 16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Cover fastened with captive stainless steel screws in threaded brass inserts.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
SKU: PJ20168RW -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJ Series – (PJ20168HW) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJ Series – (PJ20168HW) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12, & 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJ Stainless Replacement Mounting Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Lift-Off Hinged Snap Latch Twist Latch Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJ664W PJ664HW PJ664LW PJ664TW 6.10 6.10 4.18 4.88 4.88 14R0505 PJ864W PJ864HW PJ864LW PJ864TW 8.00 6.12 4.13 6.75 4.88 14R0705 PJ1084W PJ1084HW PJ1084LW PJ1084TW 10.13 8.26 4.13 8.75 6.88 14R0907 PJ1086W PJ1086HW PJ1086LW PJ1086TW 10.13 8.26 6.13 8.75 6.88 14R0907 PJ12106W PJ12106HW PJ12106LW PJ12106TW 12.13 10.26 6.13 10.75 8.88 14R1109 PJ12124W PJ12124HW PJ12124LW PJ12124TW 12.13 12.13 4.13 10.75 10.88 14R1111 PJ12126W PJ12126HW PJ12126LW PJ12126TW 12.13 12.13 6.13 10.75 10.88 14R1111 PJ14126W PJ14126HW PJ14126LW PJ14126TW 14.13 12.26 6.13 12.75 10.88 14R1311 PJ16148W PJ16148HW PJ16148LW PJ16148TW 16.27 14.40 8.13 14.75 12.88 14R1513 PJ18168W PJ18168HW PJ18168LW PJ18168TW 18.40 16.40 8.13 16.88 14.88 P1868 PJ20168W PJ20168HW PJ20168LW PJ20168TW 20.00 16.00 8.13 18.44 14.44 P2068 SKU: PJ20168HW -
Discontinued Products
Type 12 Mild Steel Modular Freestanding Disconnect Enclosure UHD M Series – (UHDM7218EPA) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Modular Freestanding Disconnect Enclosure UHD M Series – (UHDM7218EPA) (DISCONTINUED)
Application
- Designed to bolt together in any number of units for maximum flexibility and ease of transportation. The UHDM system consists of a Master enclosure to house the flange mounted disconnect switch and interlocking Slave enclosures which may be added or removed as required. Master enclosure units will accept the following disconnect switches and circuit breakers:
- ABB Controls flange mounted variable depth operating mechanism for disconnect switches and circuit breakers.
- Allen Bradley 1494F flange mounted disconnect switches and 1494D flange mounted operators for circuit breakers. Allen Bradley 1494V variable depth flange operated disconnect switches and circuit breaker mechanisms.
- C-H Westinghouse Type C361 disconnect switches and operator mechanism. Cutler Hammer Type C371 circuit breaker operating mechanisms. Flex Shaft™ handle operators for circuit breakers.
- General Electric Type STDA flange handles and variable depth operating mechanisms for disconnect switches and circuit breakers. Also Spectra-Flex™ cable operators for circuit breakers.
- I-T-E Max-Flex™ flange mounted variable depth operating handles for disconnect switches and circuit breakers.
- Square D disconnect switches and circuit breakers used with Class 9422 flange mounted variable depth operating mechanisms or cable mechanisms. These enclosures will not receive Class 9422 bracket mounted disconnect devices or Class 9422TG1 or TG2 devices.
- Refer to the Universal Heavy Duty Disconnect Modular Selection Guide.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
- Appropriate components are required to maintain these standards.
Construction
- Formed from 10 gauge steel with smooth continuously welded seams.
- Body stiffeners are provided in the larger enclosures for extra rigidity.
- Heavy duty lifting eyes are anchored into reinforced top corners.
- Removable doors are secured with heavy duty lift off hinges.
- Flange trough collar (FTC) around door excludes liquids and contaminants.
- Formed 10 gauge steel inner panels are provided on collar studs.
- Panel supports are provided.
- Center post is removable, providing easy panel installation.
- Heavy duty three point latching door mechanism.
- Side openings are reinforced to provide structural strength, smooth edges and preset gasket compression.
- Oil resistant gaskets on doors and side openings are permanently secured. No gasket kit is provided.
- Master door handle complete with screw defeater and padlock hasp.
- Slave door handle complete with padlock hasp.
- A mechanical interlock activated by the master door prevents the auxiliary door from being opened first.
- The universal flange cutout provides mounting for disconnect operators by use of the appropriate operator adaptor kit.
- A bonding stud is provided in the door and a grounding stud is provided in the enclosure for each door.
- A literature pocket is provided.
- Formed End Plates and Flat End Plates
- Formed from 12 gauge steel.
- Used to enclose the open end(s) of one or more modular enclosures.
- Two types are available. No separate gasket kit is required.
- Flat Barrier Plate
- Formed from 14 gauge steel.
- May be used to provide a barrier between modular enclosures. They are supplied complete with gasket.
- Panel Bridge Kit
- Formed from 10 gauge steel.
- May be used to join back panels together between modular enclosures to provide a continuous panel surface.
Note:
- Disconnect switches, circuit breakers and operators are not provided with the enclosure, and must be ordered separately from the manufacturer.
Finish
- Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
- Inner panel is finished in white powder coating.
Accessories
- Flange Disconnect Operator Adaptor Kits
- Door Stop Kit
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Master Enclosures
Units shown: inch. Switch units to: mm
Left Side Open Enclosure Inner Panel Door Part No. H W D H W Type UHDM724118MFTC 72.13 40.75 18.13 60.00 33.75 Single UHDM844118MFTC 84.13 40.75 18.13 72.00 33.75 Single UHDM844124MFTC 84.13 40.75 24.13 72.00 33.75 Single UHDM727918MFTC 72.13 79.00 18.13 60.00 72.00 Double UHDM847918MFTC 84.13 79.00 18.13 72.00 72.00 Double UHDM847924MFTC 84.13 79.00 24.13 72.00 72.00 Double Slave Enclosures
Units shown: inch. Switch units to: mm
Both Sides Open Enclosure Inner Panel Door Part No. H W D H W Type UHDM724118SFTC 72.13 40.25 18.13 60.00 33.75 Single UHDM844118SFTC 84.13 40.25 18.13 72.00 33.75 Single UHDM844124SFTC 84.13 40.25 24.13 72.00 33.75 Single UHDM727818SFTC 72.13 78.50 18.13 60.00 72.00 Double UHDM847818SFTC 84.13 78.50 18.13 72.00 72.00 Double UHDM847824SFTC 84.13 78.50 24.13 72.00 72.00 Double Accessories
Units shown: inch. Switch units to: mm
Part No. H W Description UHDM7218ECA 71.86 17.87 Formed end plate with mounting hardware UHDM8418ECA 83.87 17.87 Formed end plate with mounting hardware UHDM8424ECA 83.87 23.87 Formed end plate with mounting hardware UHDM7218EPA … SKU: UHDM7218EPA - Designed to bolt together in any number of units for maximum flexibility and ease of transportation. The UHDM system consists of a Master enclosure to house the flange mounted disconnect switch and interlocking Slave enclosures which may be added or removed as required. Master enclosure units will accept the following disconnect switches and circuit breakers:
-
Discontinued Products
Type 4 Mild Steel Wallmount Enclosure HWHK Series – (HW24168GYHK) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Enclosure HWHK Series – (HW24168GYHK) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
- Ideal for processing plants, utility, outdoor municipal or petro chemical locations where easy yet secure access is required.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA 3R, 4, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge steel bodies and doors.
- Continuously welded seams ground smooth.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Powder coated black zinc diecast pad lockable handle with 3 point roller latching system secures door.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating interior and exterior.
Videos
Accessories
- Additional Inner Panels
- Perforated Inner Panels
- Swing Panel Kit
- Door Stop Kit
- Type 12/4, 4X Handle Kits
- Drip Shield Kit
- Enclosure Stabilizers
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Overall Dimensions Optional Inner Panel Part No. A B C Part No. H W HW24206GYHK 24.00 20.00 6.00 18P2117 21.00 17.00 HW24246GYHK 24.00 24.00 6.00 18P2121 21.00 21.00 HW24168GYHK 24.00 16.00 8.00 18P2113 21.00 13.00 HW24208GYHK 24.00 20.00 8.00 18P2117 21.00 17.00 HW24248GYHK 24.00 24.00 8.00 18P2121 21.00 21.00 HW24308GYHK 24.00 30.00 8.00 18P2721 27.00 21.00 HW30208GYHK 30.00 20.00 8.00 18P2717 27.00 17.00 HW30248GYHK 30.00 24.00 8.00 18P2721 27.00 21.00 HW30308GYHK 30.00 30.00 8.00 18P2727 27.00 27.00 HW36248GYHK 36.00 24.00 8.00 18P3321 33.00 21.00 HW36308GYHK 36.00 30.00 8.00 18P3327 33.00 27.00 HW42368GYHK 42.00 36.00 8.00 18P3933 39.00 33.00 HW48368GYHK 48.00 36.00 8.00 18P4533 45.00 33.00 HW242010GYHK 24.00 20.00 10.00 18P2117 21.00 17.00 HW302410GYHK 30.00 24.00 10.00 18P2721 27.00 21.00 HW362410GYHK 36.00 24.00 10.00 18P3321 33.00 21.00 HW363010GYHK 36.00 30.00 10.00 18P3327 Product data
SKU: HW24168GYHK -
Discontinued Products
Desk Cover S2CDC Series – (2CLDC6036) (DISCONTINUED)
- For use when no turret is used on top of desk.
- Provides a hinged, flat, sturdy desk surface.
- Available for either Standard or Deep desks.
- Constructed of 14 gauge steel.
- Features quarter turn latches for easy access into flat desk top.
- Available in light gray and stainless steel.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
RAL 7035 Light Gray Stainless Steel Part No. Part No. B1 B2 B3 C Standard Depth Desk Cover 2CLDC2436 2CSDC2436 23.75 – – 16.38 2CLDC3636 2CSDC3636 – 35.75 – 16.38 2CLDC4836 2CSDC4836 – – 47.75 16.38 2CLDC6036 2CSDC6036 – – 59.75 16.38 Deep Depth Desk Cover 2CLDC2443 2CSDC2443 23.75 – – 24.03 2CLDC3643 2CSDC3643 – 35.75 – 24.03 2CLDC4843 2CSDC4843 – – 47.75 24.03 2CLDC6043 2CSDC6043 – – 59.75 24.03 SKU: 2CLDC6036 -
Discontinued Products
Type 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610CCT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610CCT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″ x 16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel butterfly type “twist latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosure available with clear Polycarbonate cover to 16″ x 14″.
- Molded hinge with stainless steel pin.
- Captive oil resistant gasket provides a positive seal.
- Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Swing Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJU/PCJ Replacement Polycarbonate Flange
- PJU/PCJ Replacement Polycarbonate Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Clear Cover w/Flange w/Feet w/Flange w/Feet Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJU664TF PJU664T PJU664CCTF PJU664CCT 6.05 6.27 4.13 4.88 4.88 14R0505 PJU864TF PJU864T PJU864CCTF PJU864CCT 8.05 6.27 4.13 6.75 4.88 14R0705 PJU1084TF PJU1084T PJU1084CCTF PJU1084CCT 10.05 8.27 4.13 8.75 6.88 14R0907 PJU1086TF PJU1086T PJU1086CCTF PJU1086CCT 10.05 8.27 6.13 8.75 6.88 14R0907 PJU12106TF PJU12106T PJU12106CCTF PJU12106CCT 12.05 10.27 6.13 10.75 8.88 14R1109 PJU14126TF PJU14126T PJU14126CCTF PJU14126CCT 14.05 12.27 6.13 12.75 10.88 14R1311 PJU16148TF PJU16148T PJU16148CCTF PJU16148CCT 16.05 14.27 8.13 14.75 12.88 14R1513 PJU181610TF PJU181610T 18.30 16.52 10.13 16.88 14.88 P1868 PJU201610TF PJU201610T PJU201610CCTF PJU201610CCT 20.50 16.27 10.13 18.44 14.44 P2068 SKU: PJU201610CCT -
Discontinued Products
Type 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610CCL) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610CCL) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″ x 16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosure available with clear Polycarbonate cover to 16″ x 14″.
- Molded hinge with stainless steel pin.
- Captive oil resistant gasket provides a positive seal.
- Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJU/PCJ Replacement Polycarbonate Flange
- PJU/PCJ Replacement Polycarbonate Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Clear Cover w/Flange w/Feet w/Flange w/Feet Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJU664LF PJU664L PJU664CCLF PJU664CCL 6.05 6.27 4.13 4.88 4.88 14R0505 PJU864LF PJU864L PJU864CCLF PJU864CCL 8.05 6.27 4.13 6.75 4.88 14R0705 PJU1084LF PJU1084L PJU1084CCLF PJU1084CCL 10.05 8.27 4.13 8.75 6.88 14R0907 PJU1086LF PJU1086L PJU1086CCLF PJU1086CCL 10.05 8.27 6.13 8.75 6.88 14R0907 PJU12106LF PJU12106L PJU12106CCLF PJU12106CCL 12.05 10.27 6.13 10.75 8.88 14R1109 PJU14126LF PJU14126L PJU14126CCLF PJU14126CCL 14.05 12.27 6.13 12.75 10.88 14R1311 PJU16148LF PJU16148L PJU16148CCLF PJU16148CCL 16.05 14.27 8.13 14.75 12.88 14R1513 PJU181610LF PJU181610L 18.30 16.52 10.13 16.88 14.88 P1868 PJU201610LF PJU201610L PJU201610CCLF PJU201610CCL 20.50 16.27 10.13 18.44 14.44 P2068 SKU: PJU201610CCL -
Discontinued Products
Type 4X Pull Through Wireway 1487SS Series – (1487DTSS) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 4, 4X and 12
- IEC 60529, IP66
Construction
- Bodies and covers are formed from 14 gauge 304 stainless steel with 10 gauge flanges.
- Continuous flange around wireway ends, requires cables to be pulled through.
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are natural stainless steel with a smooth brushed finish.
Accessories
SKU: 1487DTSS -
Discontinued Products
Modular Plinth S2CPL Series – (2CLP44818) (DISCONTINUED)
- Features removable front and rear panels for easy access to bottom for cabling or transport by forklift.
- For cable access, features 3 double knockouts on each end.
- Available in 4″ and 8″ heights.
- Available in 24″, 36″, 48″ and 60″ widths.
- Maintains NEMA rating of system.
- Formed 14 gauge steel.
- Also offered with formed 14 gauge stainless steel.
- Available in light gray and stainless steel.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
RAL 7035 Light Gray Stainless Steel Part No. Part No. A B1 B2 2CLP42418 2CSP42418 4.00 24.00 – 2CLP43618 2CSP43618 4.00 36.00 – 2CLP44818 2CSP44818 4.00 – 48.00 2CLP46018 2CSP46018 4.00 – 60.00 2CLP82418 2CSP82418 8.00 24.00 – 2CLP83618 2CSP83618 8.00 36.00 – 2CLP84818 2CSP84818 8.00 – 48.00 2CLP86018 2CSP86018 8.00 – 60.00 SKU: 2CLP44818 -
Discontinued Products
Type 3R Painted Galvanized Steel Wallmount Enclosure C3R HCRMD Series – (C3R303012HCR) (DISCONTINUED)
Discontinued ProductsType 3R Painted Galvanized Steel Wallmount Enclosure C3R HCRMD Series – (C3R303012HCR) (DISCONTINUED)
Application
- Designed for use as a wiring/junction box.
- Provides protection against rain, sleet, snow and dripping water.
Standards
- UL-50 Type 3R
- CSA Type 3R
- Complies with
- NEMA Type 3R
- IEC 60529, IP24
Construction
- Formed and spot welded from 16 or 14 gauge galvanized steel.
- Drip shield top and seam-free sides, front and back.
- Stainless steel continuous hinge.
- Cover fastened with captive plated screws.
- Padlocking hasp.
- Collar studs provided for mounting optional panels.
- External mounting feet.
- Oil resistant gaskets are permanently secured.
Finish
- Enclosure and cover are finished inside and out in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D Part Number H W C3R16126HCR 16.00 12.00 6.00 18P1309 13.00 9.00 C3R16166HCR 16.00 16.00 6.00 18P1313 13.00 13.00 C3R18186HCR 18.00 18.00 6.00 18P1515 15.00 15.00 C3R20166HCR 20.00 16.00 6.00 18P1713 17.00 13.00 C3R20208HCR 20.00 20.00 8.00 18P1717 17.00 17.00 C3R24208HCR 24.00 20.00 8.00 18P2117 21.00 17.00 C3R24248HCR 24.00 24.00 8.00 18P2121 21.00 21.00 C3R30248HCR 30.00 24.00 8.00 18P2721 27.00 21.00 C3R30308HCR 30.00 30.00 8.00 18P2727 27.00 27.00 C3R181810HCR 18.00 18.00 10.00 18P1515 15.00 15.00 C3R242410HCR 24.00 24.00 10.00 18P2121 21.00 21.00 C3R302410HCR 30.00 24.00 10.00 18P2721 27.00 21.00 C3R363610HCR 36.00 36.00 10.00 18P3333 33.00 33.00 C3R303012HCR 30.00 30.00 12.00 18P2727 27.00 27.00 C3R362412HCR 36.00 24.00 12.00 18P3321 33.00 21.00 C3R363012HCR 36.00 30.00 12.00 18P3327 33.00 27.00 C3R423012HCR 42.00 30.00 12.00 18P3927 39.00 27.00 C3R363612HCR 36.00 36.00 12.00 18P3333 33.00 33.00 C3R423612HCR 42.00 36.00 12.00 18P3933 39.00 33.00 C3R483612HCR 48.00 36.00 12.00
…Product data
SKU: C3R303012HCR -
Discontinued Products
Type 4 Mild Steel Wallmount Enclosure w/ Sloped Top ST Series – (ST24208LG) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Enclosure w/ Sloped Top ST Series – (ST24208LG) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Sloped top prevents water from resting on top as well as providing potential for controls mounting.
- Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA 3R, 4 and 12
- IEC 60529, IP66
Construction
- Formed 14 (24×24″ and larger) or 16 (24×20″ and smaller) gauge steel.
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latching: Type A has slotted quarter turns, Type B has handle with 3 point latching
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
- Hinges are finished in mild steel.
- Stainless steel hinge pins and quarter turns.
Finish
- Cover and enclosure are finished in recoatable RAL 7035 light gray textured powder coating.
Accessories
- Additional Inner Panels
- Swing Panel
- Swing Frame
- Eclipse DIN Rail Mounting Kit
- Eclipse DIN Rails
- Door Stop Kit
- Mounting Foot Kit
- Rear Hole Plugs
- Drip Shield Kit
- Quarter Turn Assemblies
- Quarter Turn Inserts and Keys
- Padlock Adaptor
- Handles
- Replacement Hinge Pins
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H1 H2 W D Latch Type Part No. H W ST12126LG 12.00 14.20 12.00 6.00 A EP1212 10.20 10.20 ST16126LG 16.00 18.20 12.00 6.00 A EP1612 14.20 10.20 ST20166LG 20.00 22.20 16.00 6.00 A EP2016 18.20 14.20 ST20206LG 20.00 22.20 20.00 6.00 A EP2020 18.20 18.20 ST16168LG 16.00 18.90 16.00 8.00 A EP1616 14.20 14.20 ST20168LG 20.00 22.90 16.00 8.00 A EP2016 18.20 14.20 ST20208LG 20.00 22.90 20.00 8.00 A EP2020 18.20 18.20 ST24208LG 24.00 26.90 20.00 8.00 A EP2420 22.20 18.20 ST24248LG 24.00 26.90 24.00 8.00 A EP2424 22.20 22.20 ST30248LG 30.00 32.90 24.00 8.00 A EP3024 28.20 22.20 ST30308LG 30.00 32.90 30.00 8.00 A EP3030 28.20 28.20 ST36308LG 36.00 38.90 30.00 8.00 A EP3630 34.20 28.20 ST242410LG Yoast SEO Premium
Product data
SKU: ST24208LG -
Discontinued Products
Type 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610T) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610T) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″ x 16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel butterfly type “twist latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosure available with clear Polycarbonate cover to 16″ x 14″.
- Molded hinge with stainless steel pin.
- Captive oil resistant gasket provides a positive seal.
- Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Swing Panels
- Terminal Kit Assemblies
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJU/PCJ Replacement Polycarbonate Flange
- PJU/PCJ Replacement Polycarbonate Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Clear Cover w/Flange w/Feet w/Flange w/Feet Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJU664TF PJU664T PJU664CCTF PJU664CCT 6.05 6.27 4.13 4.88 4.88 14R0505 PJU864TF PJU864T PJU864CCTF PJU864CCT 8.05 6.27 4.13 6.75 4.88 14R0705 PJU1084TF PJU1084T PJU1084CCTF PJU1084CCT 10.05 8.27 4.13 8.75 6.88 14R0907 PJU1086TF PJU1086T PJU1086CCTF PJU1086CCT 10.05 8.27 6.13 8.75 6.88 14R0907 PJU12106TF PJU12106T PJU12106CCTF PJU12106CCT 12.05 10.27 6.13 10.75 8.88 14R1109 PJU14126TF PJU14126T PJU14126CCTF PJU14126CCT 14.05 12.27 6.13 12.75 10.88 14R1311 PJU16148TF PJU16148T PJU16148CCTF PJU16148CCT 16.05 14.27 8.13 14.75 12.88 14R1513 PJU181610TF PJU181610T 18.30 16.52 10.13 16.88 14.88 P1868 PJU201610TF PJU201610T PJU201610CCTF PJU201610CCT 20.50 16.27 10.13 18.44 14.44 P2068 SKU: PJU201610T -
Discontinued Products
Type 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610L) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box (Solid and Clear Cover) (DISCONTINUED) PJU Series – (PJU201610L) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″ x 16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Stainless steel draw type “snap latch” door fasteners.
- Door fasteners include a provision for padlocking.
- Enclosure available with clear Polycarbonate cover to 16″ x 14″.
- Molded hinge with stainless steel pin.
- Captive oil resistant gasket provides a positive seal.
- Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
- Additional Inner Panels
- Terminal Kit Assemblies
- Swing Panels
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJU/PCJ Replacement Polycarbonate Flange
- PJU/PCJ Replacement Polycarbonate Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Solid Cover Clear Cover w/Flange w/Feet w/Flange w/Feet Enclosure Optional Inner Panel Part No. Part No. Part No. Part No. H W D H W Part No. PJU664LF PJU664L PJU664CCLF PJU664CCL 6.05 6.27 4.13 4.88 4.88 14R0505 PJU864LF PJU864L PJU864CCLF PJU864CCL 8.05 6.27 4.13 6.75 4.88 14R0705 PJU1084LF PJU1084L PJU1084CCLF PJU1084CCL 10.05 8.27 4.13 8.75 6.88 14R0907 PJU1086LF PJU1086L PJU1086CCLF PJU1086CCL 10.05 8.27 6.13 8.75 6.88 14R0907 PJU12106LF PJU12106L PJU12106CCLF PJU12106CCL 12.05 10.27 6.13 10.75 8.88 14R1109 PJU14126LF PJU14126L PJU14126CCLF PJU14126CCL 14.05 12.27 6.13 12.75 10.88 14R1311 PJU16148LF PJU16148L PJU16148CCLF PJU16148CCL 16.05 14.27 8.13 14.75 12.88 14R1513 PJU181610LF PJU181610L 18.30 16.52 10.13 16.88 14.88 P1868 PJU201610LF PJU201610L PJU201610CCLF PJU201610CCL 20.50 16.27 10.13 18.44 14.44 P2068 SKU: PJU201610L -
Discontinued Products
Side Panels HMESP Series – (HSP206) (DISCONTINUED)
- Maintains UL/CSA Type 12 approvals.
- Screws fasten into frame. Optional tamper resistant screws available
- Bond studs provided for grounding.
- Finished in RAL 7035 light gray.
- Sold in quantities of two.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
For Use with HME Part Number Height Depth HSP145 1400 500 HSP146 1400 600 HSP148 1400 800 HSP165 1600 500 HSP166 1600 600 HSP168 1600 800 HSP184 1800 400 HSP185 1800 500 HSP186 1800 600 HSP188 1800 800 HSP204 2000 400 HSP205 2000 500 HSP206 2000 600 HSP208 2000 800 HSP225 2200 500 HSP226 2200 600 HSP228 2200 800 SKU: HSP206 -
Discontinued Products
Type 4X Polyester Junction Box w/ Window PJU Series – (PJU181610LWF) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Junction Box w/ Window PJU Series – (PJU181610LWF) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- Standard JIC sizes under 18″x16″.
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
- Various latching options.
- Enclosures are available with bonded polycarbonate viewing windows.
- Door is supported with a continuous stainless steel hinge pin.
- Captive oil resistant gasket provides a positive seal.
- Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a light gray finish.
- Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.
Accessories
SKU: PJU181610LWF
