Wilcom's PS-55 MDx 24 Port Wall Mount POTS Splitter- CPE POTS Splitters- ADSL CPE Splitter-Wall Mount POTs Splitter-Wilcom PS-11-I2 POTs Splitter-ADSL POTS Splitter-Pots Splitters- POTS Splitter Supplier-POTs Splitters

Wilcom PS-55 MDx 24 Port Wall Mount POTS Splitter

American Tech Supply carries the entire line of Wilcom's Splitters. The Wilcom PS-55 MDx 24 Port Wall Mount POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz-1MHz) energy from interfering with POTS equipment. The PS-55 MDx employs a low-pass filter for standard voice-grade lines.

The PS-55-MDx contains 24 ADSL2+ ports, and can be ordered as a Customer Premise (CPE) Master Splitter or a Central Office (CO) Splitter. Both solutions are ideal for Multi-Dwelling and Multi-Tenant environments. Each unit is available with BIX type connectors or 110 type connectors for direct wiring connections of the LINE, POTS and DATA connections.

The unique foot-print of the PS-55-MDx is similar in size to a standard M-66 punch down block making it ideal for wall mounting applications.

• Passive Low Pass Filter
  Passive circuitry for continuous phone service in the event of an AC power failure
• Easily Mounted
  The compact ADSL2+ POTS Splitter frame is designed to be screwed directly to a backboard
• Unlimited ADSL Bandwidth
  Full bandwidth allocation as compared to the "Micro-filters" on the market today
• CO or CPE Splitter
  This unit can be ordered as a central office or customer premise master ADSL2+ splitter making it ideal for MDU or MTU applications
• Compatible with ADSL coding schemes
  The PS-55-MDx ADSL2+ POTS Splitter is compatible with all ADSL coding schemes
• Meets ANSI T1.413 and G.992.1 - E.2
  The PS-55-MDx is fully compliant with the requirements of ANSI T1.413-1998 Annex E; ITU-T G.992.1 & G.992.2 Annex E.2 Type 2 (North America), G.992.5 (ADSL2+)
• BIX Connectors or 110 Connectors
  The PS-55-MDx is available with BIX connectors or 110 connectors for the physical interface of the LINE, POTS, and DATA connections

PS-11 NID POTS Splitter	PS-11 Ring Trip Mitigator	PS-11v NID POTS Splitter
PS-55 MDx 24 Port Wall Mount POTS Splitter	PS-20 ETSI POTS Splitter	PS-21 ISDN POTS Splitter
PS-4101 1U Shelf	PS-4103 3U Shelf	PS-4401 1RU-96 Port Shelf
PS-4100 24 Port Splitter Card	PS-15 Wall-mount POTS Splitter	PS-4401 1RU-96 Port Shelf

 

ADSL-DSL-VDSL Products

POTS SplitterThe Wilcom PS-20 ETSI POTS Splitter is designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz-1MHz) energy from interfering with POTS equipment. The PS-20 employs a low-pass filter for standard voice-grade lines.

PS-11 NID ADSL Shelf. This PS-4101 1U Shelf is 1.75" tall and design to be equipped with up to two (2) ADSL2+ Splitter cards for a total of 48 ports. The shelf can be mounted in 19 or 23 inch racks by using the unique designed rack adapters. The wide spectrum of operation makes this shelf ideal for ADSL2+ deployment. Also this shelf delivers excellent port-to-port cross talk isolation making it an excellent ADSL splitter product for video deployment. Its' small foot print design makes it an excellent product for remote applications.

ADSL and POTS Coexist- 24 Port splitter Card The PS-4100 series provide standard POTS service in concert with ADSL technology by blocking high-frequency ADSL energy from interfering with POTS equipment.

The Wilcom PS-11-I2 POTS Splitter is a passive low-pass filter designed to provide POTS service in concert with ADSL technology. The device blocks high frequency (20kHz - >1MHz) energy from interfering with POTS equipment. The PS-11-I2 employs a low-pass filter for standard voice-grade lines.

This PS-4103 3U Shelf is 3 EIA rack units tall (5.25") and design to be equipped with up to six (6) ADSL2+ Splitter cards for a total of 144 ports. It is one of the industries highest density shelves with the smallest foot-print for mounting into 19 inch racks. The shelf can be mounted in 19 or 23 inch racks by using the unique designed rack adapters. The wide spectrum of operation makes this shelf ideal for ADSL2+ deployment. Also this shelf delivers excellent port-to-port cross talk isolation making it an excellent ADSL splitter product for video deployment. Its' small foot print design makes it an excellent product for remote applications.

Wilcom’s PS-4401 1RU-96 Port Shelf is the industries highest density ADSL2+ POTS splitter in a one rack-unit design. This 96 port 1 RU design along with Wilcom’s proven performance makes it the perfect Central Office splitter. The high-density, temperature hardened splitter also has the addition of common mode protection creating the perfect splitter for remote cabinets