ATS 763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil Resistant Jacket Suitable for Burial - Unshielded with Unbonded Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper wire, enclosed in an outdoor rated, moisture and chemical resistant black polyethylene jacket. Flooding compound surrounds the twisted pairs, providing additional moisture protection. This cable is engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance criteria for 10/100/1000BaseT Ethernet applications-Extreme outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for extreme weather conditions. Can be ran exposed or buried.

ListPrice: $ 310/1000 feet, Our Price $ 189.99/1000 Feet- Discount Available!!Call (866) 342-3721

Our ATS 763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable is not the same as you can buy at 'retails stores that is rated as "indoor-outdoor'- this is the real mccoy and can be direct buried into the ground.

Tough CAT1000 Data Cables- Outdoor Rated CAT 6 Cable-For industrial and harsh environments- There are minimum purchasing requirements - please call (866) 342-3721 for details.Part Number: ATS 1105508-Plenum Part Number: ATS 1005508-RiserPart Number: ATS 1105708-PatchToughCAT1000 Data Cables-For industrial and harsh environments / TIA/EIA Category 6 UTP / 4 pair 23 AWG plenum and riser / 24 AWG patchcord

RATINGS & SPECIFICATIONS
Exceeds TIA/EIA-568-B.2-1 Category 6, ISO/IEC 11801; Plenum meets CMP, FT-6; Riser meets CMR, FT-4

Outdoor Cables

D700L, D703L, D740L, D750L, R700L, DR700L, R740L, DR740L, S423L, S448L, C227L and C1017L series Outdoor Cables-Long-haul cables-Aeria Cables- Burieal Cable-Cable Duct and low temperature conditions .

Chromatic Technologies offers over 200 versions of outdoor cables. They are designed to handle everything Mother Nature can throw at them and keep a network running. They're designed for long haul networking, interbuilding, campus LAN, trunking and local loop applications for interbuilding, above or below ground conduit, direct buried or lashed installations. They handle IEEE 802.3 for 1000 Base SX/LX (1000 Mbps), 100 Base F (100 Mbps) and 10 Base F (10 Mbps); ATM 155 Mbps, 622 Mbps, 1.2/2.4 Gbps; Fibre Channel FC-PH (1062 Mbps); IEEE 802.5 (16 Mbps); FDDI (100 Mbps); ICEA 83-596; TIA/EIA-568B; BellCore GR-409 & GR-20; RUS 1753F-601 (PE 90).

Options include:
Loose buffered armored and armored single jacket (D700L & D703L)
Loose buffered dielectric single jacket and double jacket (D740L & D750L)
RUS-listed loose buffered armored flooded and armored dry blocked (R700L & DR700L)
RUS-listed loose buffered dielectric flooded and dry-blocked (R740L & DR740L)
Loose buffered single and double jacket low temperature (C227L & C1017L)
Single tube loose buffered dielectric and armored (S423L & S448L)

Features:
Loose buffered designs
Dry blocked core eliminates the need to clean the cable, saving installation time
Loose tube S-Z stranded for mid span access
Singlemode, multimode and hybrid fiber cables available
Color coded for easy identification
FDDI, ATM, Fibre Channel, Ethernet, Gigabit Ethernet and Token Ring guaranteed performance

Multi Mode Cables
Outdoor OSP
Military Cables
Security Cables
Coax Cables
Dielectric Cables
Datacom/Central Office Cables
Video Conferencing

Our outdoor rated CAT 5e cable is available in 500 foot- 1000 foot reels as well as custom lengths- since the outdoor rated CAT 5e cable is based on the cost of oil-you need to call us at (866) 342-3721 to get the latest pricing. Generally the outdoor rated CAT 5e Cable costs from$ 150-$ 195 per 1000 foot reel. With custom lengths of the outdoor rated CAT 5e cable there is also a cut charge. We can normally ship the same day of order is placed before 1pm Pacific Time.

American Tech Supply carries thousands of types of cables from the below manufacturers for CAT 5e cable, CAT 5e Plenum, CAT 6 plenum, CAT 6 cable and Outdoor Rated CAT 5e Cable

ATS 763208 Aluminum Shielded Cable (Call For Minimum Order) -Aluminuml Shielded Cable (Call For Minimum rder)-1000FT OSP Broadband Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP cables are designed to provide extension of the LAN beyond the premises. AluminumShielded for protection against EMI/RFI. A variety of constructions are available to suit multiple environmental needs.

ATS 763308 Steel Shielded Cable (Call For Minimum Order)-1000FT OSP Broadband Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP cables are designed to provide extension of the LAN beyond the premises. Steel Shielded for protection against EMI/RFI. A variety of constructions are available to suit multiple environmental needs.The ultimate in OSP rated CAT 5e cable.

Call Today (866) 342-3721

CAT 5e Bulk Cable- CAT 6 Bulk Cable- Wholesale CAT 6 Cable

CAT6 Bulk Cable

CAT5e Bulk Cable

American Tech Supply carries a complete line of stub cable, transition cable, and PE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair PE 89 to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993.

Stub Cable- Transition Cable-PE 89, 25 Pair PE 89, Copper Telecom Cables,Seal Pic FSF PE 89- Transition Cables- Seal Pic FSF PE 39- Stub Cables- Direct Bury Copper Telecom Cables-Icky Pick

ATS carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).American Tech Supply carries a complete line of stub cable, transition cable, andPE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993.

West Coast (866) 342-3721
East Coast (866) 650-3282

For More Information On Any of the Products Below- Just click on the Pictures -More Information and Specifications For PE 39 and PE 89 Below

PE 89 Application:
For use in wet environments where protection from moisture is required. Approved for direct burial, duct or aerial installations when supported by a messenger.PE 89 Conductors:
Solid soft bare annealed copper. Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk.PE 89 Insulation:
Dual layer of foamed polyolefin and solid polyolefin.PE 89 Filling Compound:
Cable core is filled with an extended thermoplastic rubber (ETPR) filling the interstices between the pairs and under the core tape.PE 89 Core Wrap:
Non-hygroscopic, dielectric tape with overlap.PE89 Shield:
Corrugated, copolymer coated, 8-mil aluminum tape longitudinally applied with overlap. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.PE 89 Jacket:
Black, sunlight-resistant, linear low-density polyethylene.Additional Standards:
• ANSI/ICEA S-84-608-1994 • RUS 7 CFR 1755.890 (formerly REA PE-8

Stub Cable Stub Cable- Stub Cable is factory process filled cable that is cut to customer specified lengths eliminating time-consuming cable preparation at the customer job site. The Stub Cable features a factory installed pneumatic cable "block" on one end of the cable (a variety of cable types are available; 22, 24, 26 gauge cable with pair counts from 50 to 1800 pair sizes). The cable block prevents air and/or filling compound leakage from pressurized cable plant to non-pressurized cable plant. The cable block is typically located 120 inches from one end of the cable and is sealed using state of the art blocking compounds. The cable block is small in diameter relative to the cable diameter to minimize obstructions and clearances from adjacent cable plant. Transition cable- Transition Cable is a factory processed filled cable that is pre-cut to custom lengths. This eliminates time-consuming on-site preparation and the use of hazardous cleaning chemicals in the field. Additionally, cables can be provided with optional factory-installed connector modules and pulling eyes.

ATS carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).Part Numbers: Please Note after ATSPE89 or ATSPE39 is the "number of copper cables" PE 89 Cables: ATSPE89-50PE 39 Cables: ATSPE39-50

Application:

The assembly is then wrapped with two metal shield tapes:

- A corrugated .008" thick polymer coated aluminum tape and a corrugated .006" polymer coated steel tape.

REA PE-89

• CONDUCTOR:    Solid annealed bare copper, sizes 19 AWG (.9mm ), 22 AWG  (.64mm), and 24 AWG (.5mm).

  INSULATION:    Inner layer of foamed natural polyolefin covered by outer layer of solid colored polyolefin, color coded in accordance with standard telephone industry code.

  TWISTED PAIRS:    Individual conductors twisted into pairs with varying lays to minimize crosstalk and with specified color combinations to provide pair identification. 

  CABLE ASSEMBLY:    Cables having 25 pairs or less are assembled in a single group.  Cables having more than 25 pairs are assembled in units, each individually identified by color coded unit binders.  The interstices between the pairs are filled with an 80 degree Centigrade filling compound.

  CORE COVERING:    Non-hygroscopic dielectric tape.

  SHIELD:     SEALPIC-FSF-Electrically continuous 0.008 in. (0.2mm) thick polymer coated, corrugated aluminum tape applied longitudinally with overlapped edges and flooded with flooding compound.

  JACKET:    Black polyethylene.

• IDENTIFICATION AND LENGTH MARKING:    Manufacturer's identification, pair count, conductor size, and year of manufacture are surface marked on the jacket at 2ft. intervals.  Sequentially numbered length markings are located at alternate 2 ft. intervals.

CAT 3-CAT 3 LAN Cable-----

---- Composite Cable

Field Kits Mode Conditioning Cables Fiber Jumpers

Type	Part Number	Description
CAT6Cable	K6-1KSTP-BL	CAT6 550MHz Cable, 24AWG, STP, 4 Pairs, 1000', Blue
CAT6 Plenum	K6-1KUTP-PLEN-BK	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, Plenum, 1000', Black
CAT6 Plenum	K6-1KUTP-PLEN-BL	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, Plenum, 1000', Blue
CAT6 Plenum	K6-1KUTP-PLEN-GR	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, Plenum, 1000', Green
CAT6 Plenum	K6-1KUTP-PLEN-GY	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, Plenum, 1000', Gray
CAT6 Plenum	K6-1KUTP-PLEN-RD	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, Plenum, 1000', Red
CAT6 Plenum	K6-1KUTP-PLEN-WH	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, Plenum, 1000', White
CAT6 Cable	K6-1KUTP-BL	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, 1000', Blue
CAT6 Cable	K6-1KUTP-WH	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, 1000', White
CAT6 Cable	K6-1KUTP-RD	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, 1000', Red
CAT6 Cable	K6-1KUTP-GR	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, 1000', Green
CAT6 Cable	K6-1KUTP-GY	CAT-6 550MHzCable, 23AWG, UTP, 4 Pairs, Solid, 1000', Gray
CAT6 Cable	K6-1KUTP-YL	CAT-6 550MHz Cable, 23AWG, UTP, 4 Pairs, Solid, 1000', Yellow
CAT6 Cable	K6-1KUTP-BL/ST	CAT-6 550MHz Cable, 24AWG, UTP, 4 Pairs, Stranded, 1000', Blue
CAT6 Cable	K6-1KUTP-GY/ST	CAT-6 550MHz Cable, 24AWG, UTP, 4 Pairs, Stranded, 1000', Gray
CAT6 Cable	K6-1KUTP-RD/ST	CAT-6 550MHz Cable, 24AWG, UTP, 4 Pairs, Stranded, 1000', Red
CAT6 Cable	K6-1KUTP-GR/ST	CAT-6 550MHz Cable, 24AWG, UTP, 4 Pairs, Stranded, 1000', Green
CAT6 Cable	K6-1KUTP-WH/ST	CAT-6 550MHz Cable, 24AWG, UTP, 4 Pairs, Stranded, 1000', White
CAT6 Cable	K6-1KUTP-YL/ST	CAT-6 550MHz Cable, 24AWG, UTP, 4 Pairs, Stranded, 1000', Yellow