|
Innerduct Installation Tools- Innerduct Coupler Tools- Innerduct Splicing Clamp-Hydraulic Coupling Press
American Tech Supply offers innerduct and Innerduct Installation Tools, Innerduct Coupler Tools, Innerduct Splicing Clamp, Hydraulic Coupling Press in various sizes.
Designed as a high productivity tool for installing aluminum threaded and barbed coupling, the DucLok™ Hydraulic Coupling Press has evolved to set an industry standard for its functional simplicity and rugged dependability. Like other Cabetec® equipment, it is the product of practical, common sense engineering and field tested experience.
Machine installed coupling increase the overall integrity of every connection by insuring consistent, full depth, accurately centered joints inside every coupling. These compact, labor saving tools can easily pay for themselves over the course of installing 200 or 300 couplings.
In operation the ends of the innerduct are simply locked into the pair of hinged clamps and forced into the coupling under power of the small hydraulic pump. Compression springs inside the frame automatically return the movable clamp to its unloaded position after use.
The frame of the tool is constructed of heavy gauge 2" tubing which protectively houses the hydraulic ram and other mechanical components. This designs feature shortens the overall length of the tool while permitting the maximum amount of travel for the movable clamp. Clamp bodies are heavy steel casting - not welded fabrications. Clamps have removable inserts to accommodate innerduct of any size from 1" to 2". The wide base provides a stable platform during the operation as well as a convenient carrying handle.
ATS a national distributor specializes in fast turnaround for a Complete Line of Innerduct and Raceway Products including standard innerduct, Plenum Innerduct, High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. ATS's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickeness. ATS stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE innerduct/duct is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
American Tech Supply will DROP-SHIP all your innerduct needs from one 250 coil to a several truckloads of 6" HDPE. Call us today for a competitive price and let us take care of all the logistics of delivering our product to your door.
West Coast (866) FIBER-21-
East Coast (866) 650-3282
 American
Tech Supply is an active CCR registered supplier for the United
States Government
Power-grips Like a Vise
The ISC-100 Duct Splicing
Clamp is a convenient labor-saving accessory used for aligning and
holding the two ends of the innerduct when installing Cabletec's
Two-Piece Plastic Reusable Couplings. The ends of the duct are held
in perfect alignment with two adjustable, standard action Vice-Grip®
pipe clamps welded to a lightweight frame bar. The clamps will adjust
to duct sizes from 3/4" to 1 1/2". The tool weighs 3 lbs. and is
8" long.
This
is a picture of our prototype 4" capacity coupling press. It can
be used with inserts on 3" couplings.
Designed as a high productivity tool for installing aluminum threaded and barbed coupling, the DucLok™ Hydraulic Coupling Press has evolved to set an industry standard for its functional simplicity and rugged dependability. Like other Cabetec® equipment, it is the product of practical, common sense engineering and field tested experience.
Machine installed coupling increase the overall integrity of every connection by insuring consistent, full depth, accurately centered joints inside every coupling. These compact, labor saving tools can easily pay for themselves over the course of installing 200 or 300 couplings.
In operation the ends of the innerduct are simply locked into the pair of hinged clamps and forced into the coupling under power of the small hydraulic pump. Compression springs inside the frame automatically return the movable clamp to its unloaded position after use.
The frame of the tool is constructed of heavy gauge 2" tubing which protectively houses the hydraulic ram and other mechanical components. This designs feature shortens the overall length of the tool while permitting the maximum amount of travel for the movable clamp. Clamp bodies are heavy steel casting - not welded fabrications. Clamps have removable inserts to accommodate innerduct of any size from 1" to 2". The wide base provides a stable platform during the operation as well as a convenient carrying handle.
All components in the Cabletec® DK200H Hydraulic Coupling Press can be ordered as repair items. See general specifications below:
DK200H Hydraulic Coupling Press |
| Length: |
24" |
Pump and Ram Capacity |
5 Tons |
| Height: |
8" |
Range of Duct Sizes: |
1" - 2" |
| Width: |
8" |
Material & Finish: |
Powder Coated Steel |
| Tool Weight: |
30 lbs. |
Pump Weight: |
17 lbs. |
|
Specifications subject to change without notice |
| ISC-100 Innerduct Splicing Clamp |
Power-grips Like a Vise
The ISC-100 Duct Splicing
Clamp is a convenient labor-saving accessory used for aligning and
holding the two ends of the innerduct when installing Cabletec's
Two-Piece Plastic Reusable Couplings. The ends of the duct are held
in perfect alignment with two adjustable, standard action Vice-Grip®
pipe clamps welded to a lightweight frame bar. The clamps will adjust
to duct sizes from 3/4" to 1 1/2". The tool weighs 3 lbs. and is
8" long.
| Click image for more detail and description |
| DK200H Hydraulic Coupling Press |
| Click image for more detail and description |
| 4 Inch Hydraulic Coupling Press |
| Click image for more detail and description |
 Cable
Guide fabric innerduct that is equivalent to Maxcell allows you
to place the maximum number of cables in any type of conduit network
structure. By taking the shape of the cables placed within, Cable
Guide allows you to utilize up to 80% of available duct space-Click
For Complete Information About Cable Guide
Fabric Innerduct.
HDPE Innerduct Specifications 
Call
For Latest Pricing (866) 342-3721
DPE Innerduct
Specifications
Looking for an alternative conduit source?
We offer superior quality conduit at competitive prices and immediate service.
Home
| Cables | Switches
| Contact Us | Our
Team | Locations
|
