Load
Coil Cases-Smart Coil-Load Coils-Load Coil Case-RFI Suppression Networks-Severe
Service- RFI Suppression Networks-Fiber Splice Closures-RFI Suppression Networks
 .
  To
OSP
|
Kwik
Kase™ Load Coil Cases
Kwik Kase Load Coil Cases take advantage of the
modular design of Charles load coils. A U-shaped design (2/3 enclosed ABS plastic
tube) allows coils to be easily snapped into or out of the case. This intelligent
modular design allows for future expansion with minimal service needs. Technicians
just need snap in additional coils when needed. Kwik Kases mount to enclosure
backboards with provided bolting hardware. 
Kwik
Kases come equipped with mini 88mH coils, although other inductances may be special
ordered. Available coil counts are 1, 2, 3, 4, 5, 6, 10, 11, 12, 15, 16, 18, 20,
24 and 25.
Ready
Access Load Coil Cases
Ready Access Load Coil Cases are designed for use in
splice cases, buried plant housings and ready access closures. All Charles single
load coils are modular in design. Load coils are assembled in an ABS plastic tube
and totally encapsulated with a polyurethane compound. Tie straps are included
for convenient mounting to enclosure backboards.
Each case is provided with
fully color coded, band stripped, 36” long plastic insulated copper conductors
which are compatible with filled cable. The leads are grouped IN and OUT with
matching pair colors in the IN and OUT groups corresponding to the same coil.
Ready Access Load Coil Cases come equipped with mini 88mH coils, although other
inductances may be special ordered. Available coil counts are 3, 5, 6, 10, 11,
12, 16, 18 and 25. 
In-Splice
Modular Load Coil Case
The contour design of Charles’ In-Splice Modular
Load Coil Case is designed to mount inside buried distribution splice closures
such as Charles Pedlock Pedestals, attachable to the splice bundle itself. The
contour design conforms to the shape of round closure domes, preventing dome closure
problems. By in-splice mounting load coils within the buried distribution splice
closure, the need for separate component cases is eliminated. 
The
In-Splice Modular Load Coil Case houses 25 load coils in an encapsulated, shock
absorbing ABS plastic case. Components are terminated with 24 gauge, 36”
long color-coded leads. Other lead lengths may be special ordered.
Universal
Load Coil Cases
Universal Load Coil Cases are both versatile and convenient.
These cases are truly universal, with mounting options for utility power, aerial
strands, and manholes in addition to direct burial installation. With the ability
to house from 25 to 3,600 load coils, Universal Load Coil Cases are the convenient
way to place line conditioning components wherever they are needed in the local
loop.
Rugged polyethylene case enclosures provide optimal protection against
all weather conditions, ground acids and corrosive elements in the environment.
Their compact size and light weight enables a reduction in installation costs
and reduces shipping and handling charges. Underground manhole rebuilding requirements
can be reduced dramatically.
The provided stubbing cable is constructed of
PASP type plastic with insulated color-coded conductors. Standard stub length
is 10 feet, although any length may be special ordered. The connection between
the stub and load coil case is physically bonded, providing both strain relief
and a weather-resistant seal. Positive moisture and pressure dam is affected in
the neck of the case by a unique vacuum process, drawing the damming compound
into the stub. This eliminates moisture propagation into the case. Preconnectorized
cable ends are available. 
All
cases are hermetically sealed with a special chemical bonding process. For additional
strength and security all case component joints are welded and double sealed.
Internal flooding of the entire case with non-hydroscopic urethane provides dielectric
integrity and resistance to moisture, thermal shock and impact.
 
|
