Product Categories

About Us

cable, vdsl, patch

 

Signamax- Signamax 0651800- 10/100 to 100FX Industrial DIN-Rail Mount Media Converters- Signamax Industrial Ethernet- Media Converters- Ethernet Switches- Industrial DIN-rail Mount Power Supplies



10/100 to 100FX Industrial DIN-Rail Mount Media Converters
Signamax Connectivity Systems' 065-1800 series 10/100 to 100BaseFX have been developed to operate in harsh industrial environ-ments that require ruggedized equipment that can operate in severe temperature extremes. These media converters are an afford-able solution for outdoor environments, transportation roadside systems, shop floors, and other harsh environments where consistent operation at temperature extremes of -40°F to 176°F (-40°C to 80°C) is necessary. These media converters are compact, plug-and-play devices that do not require complex user setup, but also have the manual setting features necessary to adjust to unusual oper-ating conditions.

* Meets NEMA TS1 Environmental Requirements for Traffic Control Equipment.
* Meets IEC61000-6-2 EMC Generic Standard Immunity for Industrial Environment.
* UL 1604 Class 1, Division 2 Classified for use in hazardous locations.
* RJ-45 Port Auto-Negotiates 10/100Mbps & Full/Half-Duplex Mode, with Auto-MDIX
* 100FX Port Available with Multimode, Singlemode, and WDM Singlemode.
* DIP Switch Configuration for Link Fault Signaling/Link Down Alarm, Plus Speed/Duplex Mode
* Non-Blocking Store-and-Forward Mechanism for Full Wire-Speed Performance
* Supports 2K MAC Addresses.
* Broadcast Storm Filtering
* Back-Pressure and IEEE 802.3x Compliant Flow Control
* Alarms for Power Failure and Port Link Failure via Relay Output.
* Redundant 24V DC Terminal Block Power Inputs
* Supports DIN-Rail or Panel Mount Installation


10/100 To 100FX DIN-Rail Hardened Media Converters

Part Number

Description

065-1800TB 10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
ST Multimode, 2 km Span, 24 V DC Redundant Power Terminal Block

065-1810TB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
SC Multimode, 2 km Span, 24 V DC Redundant Power Terminal Block

065-1820TB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
SC Singlemode, 15 km Span, 24 V DC Redundant Power Terminal Block

065-1820EDTB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
SC Singlemode, 40 km Span, 24 V DC Redundant Power Terminal Block

065-1820XLDTB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
SC Singlemode, 75 km Span, 24 V DC Redundant Power Terminal Block


10/100 To 100FX WDM DIN-Rail Mount Hardened Media Converters

065-1876ATB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
Single Fiber SC Simplex Singlemode, Tx=1310 nm; Rx=1550 nm,
20 km Span, 24 V DC Redundant Power Terminal Block

065-1876BTB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
Single Fiber SC Simplex Singlemode, Tx=1550 nm; Rx=1310 nm,
20 km Span, 24 V DC Redundant Power Terminal Block

065-1876AEDTB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
Single Fiber SC Simplex Singlemode, Tx=1310 nm; Rx=1550 nm,
40 km Span, 24 V DC Redundant Power Terminal Block

065-1876BEDTB

10/100BaseT/TX to 100BaseFX Industrial Hardened Media Converter,
Single Fiber SC Simplex Singlemode, Tx=1550 nm; Rx=1310 nm,
40 km Span, 24 V DC Redundant Power Terminal Block


Industrial Media Converters


Industrial Ethernet


Signamax Connectivity Systems' Industrial Ethernet products provide a cost-effective answer for both media conversion and Ethernet switching needs found in harsh industrial and extreme temperature environments. Whether the need is for physically ruggedized equipment or equipment that can operate in severe temperature extremes, Signamax Network Connectivity products provide the quality needed to get the job done. Signamax managed and unmanaged Ethernet switching and media conversion products are an affordable solution for outdoor environments, transportation roadside systems, shop floors, and other extreme environments where consistent operation at temperature extremes of -40°F to 167°F (-40°C to 75°C) is necessary. 
 

 

 

 

 

 

Network Connectivity

Media Converters Media Converters
Ethernet Switches Ethernet Switches
Industrial Ethernet Industrial Ethernet
SFP Interface Modules SFP Interface Modules
Optical Fiber NICs Optical Fiber NICs

Premise Connectivity

Work Area   Outlet Systems Work Area Outlet Systems
Patching Systems Patching Systems
Cross-Connect Systems Cross-Connect Systems
Patch   CordsPatch Cords
Optical Fiber Systems Optical Fiber Systems
Support Structures Support Structures

 

BIF-Bend Insensitive Fiber

New Bend Insensitive Fiber Jumpers

Raceway Systems- Cable Tray