SPECIFICATIONS
* APPLICABLE STANDARDS
IEEE 802.3u (100BaseFX Fast Ethernet);
EIA/TIA RS-232E
EIA/TIA-574
* PORTS
1x duplex fiber; 100BaseFX - SC Multimode (065-1063FSC)
1x duplex fiber; 100BaseFX - ST Multimode (065-1063FST)
1x duplex fiber; 100BaseFX - SC Singlemode (065-1063FSM)
1x 9-pin serial connector; RS-232 / RS-422 / RS-485 - D-sub, female (all models)
* DATA RATES
Fiber (Models 065-1063FSC, 065-1063FST, and 065-1063FSM): 100 Mbps
Serial (all Models): 50 ~ 115.2 kbps (asynchronous).
* DISTANCES SPANNED
Copper: 1,200 meters (RS-422, RS-485; 24 AWG - all models)
15 meters (RS-232 - all models)
Fiber: 2,000 meters (multimode models 065-1063FSC & 065-1063FST)
30 km (singlemode model 065-1063FSM)
Please Note: Fiber span distances shown are for typical field conditions. Please use the link power budget specifications shown below for meaningful comparisons between competing products.
* SERIAL DATA PORT INFORMATION
Signals:
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, RI, DCD, GND
RS-422: TxD+/-, RxD+/-, GND
RS-485: Data+, Data-, GND
Configuration:
Parity: None, even, odd
Data bits: 7, 8
Stop bits: 1, 2 (only "None" parity)
Switches:
DIP 1: Enables / disables console / data communication mode
DIP 2: Enables / disables RS-232
DIP 3: Enables / disables RS-422/485 (4-wire)
DIP 4: Enables / disables RS-485 (2-wire)
DIP 7: Enables / disables termination (TMR)
* FIBER INTERFACE, MULTIMODE MODELS 065-1063FSC AND 065-1063FST:
Type: LED
Wavelength: 1300 nm nominal (1270 nm maximum, 1380 nm minimum)
Maximum Output Power: - 14.0 dBm
Minimum Output Power: - 20.0 dBm
Sensitivity: - 31.0 dBm
Link Power Budget: 11.0 dB
* FIBER INTERFACE, SINGLEMODE MODEL 065-1063FSM:
Type: MQW Laser
Wavelength: 1310 nm nominal (1261 nm maximum, 1360 nm minimum)
Maximum Output Power: - 7.0 dBm
Minimum Output Power: - 15.0 dBm
Sensitivity: - 34.0 dBm
Link Power Budget: 19.0 dB
* ENVIRONMENT
Operating:
Temperature: 32°F to 122°F (0°C to 50°C)
Relative Humidity: 10% to 80%, non-condensing
Non-Operating/Storage:
Temperature: - 4°F to 176°F (-20°C to 80°C)
Relative Humidity: 5% to 90%, non-condensing
* ELECTRICAL REQUIREMENTS
Operating Voltage: 9 -32V DC
Power Supply: 12 Volts DC, 0.8 A
* PHYSICAL CHARACTERISTICS
Dimensions: 4.30 x 3.54 x 1.24 inches [D x W x H] (109.2 x 90 x 31.5mm)
Weight: 0.62 lbs. (280 grams)
* EMISSIONS
FCC Part 15 of Class A & CE approved
* WARRANTY
Lifetime