SPECIFICATIONS:
* APPLICABLE STANDARDS
IEEE 802.3 (10BaseT Ethernet);
IEEE 802.3u (100BaseTX & 100BaseFX Fast Ethernet);
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
* PORTS
1 x RJ-45 Twisted Pair; 10/100/1000BaseT/TX
1 x 1000Base SFP module slots
* DATA RATES
Twisted Pair: 10 Mbps, 100 Mbps, or 1000 Mbps
Fiber SFP Slot: 1000 Mbps
* DISTANCES SPANNED
Copper: 100 meters
Fiber: 220 meters to 80 km; varies based upon fiber type and SFP model chosen for use.
Please Note: Fiber span distances shown are for typical field conditions. Please use the link power budget
specifications shown in the SFP module specifications for meaningful comparisons between competing products.
* STATUS LEDs
PWR (green): Illuminates under normal operation.
ALM (red): Illuminated when failure occurs on any fiber link or on Link Fault Signaling (LFS).
LNK/ACT (green): Illuminated when receiving link pulses from compliant devices; flashing when data packets are being transmitted or received. Fiber port indicator is located on the front panel; copper port indicator is located in the upper right corner of the RJ-45 jack.
1000 (green): Illuminated when the copper port has auto-negotiated to 1000BaseT speed; located in the upper left corner of the RJ-45 jack.
* PERFORMANCE
Latency: < 4.2 Bs (LIFO)
Throughput @ 100Base: 148,810 pps (64-byte packets)
Throughput @ 1000Base: 1,488,100 pps (64-byte packets)
* ENVIRONMENT
Operating:
Temperature: 32°F to 122°F (0°C to 50°C)
Relative Humidity: 10% to 90%, non-condensing
Non-Operating/Storage:
Temperature: -4°F to 158°F (-20°C to 70°C)
Relative Humidity: 5% to 90%, non-condensing
* ELECTRICAL REQUIREMENTS
Operating Voltage: 9 - 32 Volts DC
Power Supply: 12 Volts DC, 0.8 A
* PHYSICAL CHARACTERISTICS
Dimensions: 4.30 x 2.91 x 0.92 inches [D x W x H] (109.2 x 73.8 x 23.4mm)
Weight: 0.35 lbs. (160 grams)
* EMISSIONS
FCC Part 15 of Class A & CE approved
* WARRANTY
Lifetime
|