PE89-Copper Telecom Cables-PE 89-PE 89 Cable-50 Pair PE 89-100 Pair PE 89-Seal Pic FSF PE 89- Seal Pic FSF PE 39- 25 pair PE 89
PE 89-We STOCK Most common Sizes of PE 89 cable and we can offer carry 6 Pair -and up to 2500 Pair PE 89-however the standard PE 89n made by General Cable PE 89 and Essex Cable goes up to 1800 pair. We can provide custom PE 89 upt to 2500 pair and have our large USA manufacturer able to supply that if you need more than 5,000 feet. We ca offer you the USA's best pricing Please call (866) 342-3721 for more information. We can custom cut your PE 89 cable to any length. If you have a large project and require thousands of feet of PE 89 please call us for project pricing.
WE HAVE STOCK IN CA, KENTUCKY, FLORIDA , NEW YORK AND MORE!
American Tech Supply also carries a complete line of PE 89 from 6 to 1800 pairs from General Cable and Essex Cable and PE89, stub cable, transition cable, and PE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair PE 89 to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable.SEALPIC®-FSF Cables are designed for low risk direct burial or duct applications where protection from moisture is required and aluminum shielding is desired. SEALPIC-FSF may be used aerially, but must be attached to a support strand. American Tech Supply carries a complete line of PE 39, PE 22 including stub cable, transition cable, and PE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair PE 89 to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. Our PE 89 is made by General or Essex and meets all RUS standards. We have available other manufacturers upon request. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993. Depending on destination we will quote and supply PE 89 cable from General, Essex or other suppliers.
6 - 1200Pair (Or more -pleae call) , 19-24 AWG Filled Foam Skin Cable-Black Core Construction: Conductors: Solid, annealed copper; sizes 19 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color.Core Assembly:
Ppairs are assembled together in a single group.More than 6 pairs: pairs are arranged in groups, each group having a color coded unit binder.
Corrugated, copolymer-coated, 0.008" aluminum tape applied longitudinally with an overlap.
The sheath interfaces are flooded with an adhesive water-blocking compound.Compliance:
Rural Development Utility Program (RDUP) 7CFR 1755.890 (RUS PE-89)
Standard lengths are shipped on non-returnable wood reels.
Non-standard packaging is available upon request.Conductors: Solid, annealed copper; sizes 19 AWG- 24 AWG
Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color coded in accordance with telephone industry standards.
Ask about our USA Made CAT6- CAT 6A and CAT 7 Patch Cords
American Tech Supply Is Your One Source For All Your Copper Cable-Data-Fiber Optic Needs
West Coast Sales (866) 342-3721East Coast Sales (866) 650-DATA
FOAM SKIN INSULATED FILLED TELEPHONE CABLE
RDUP (RUS) PE-89 AL AND CACSP
Note: Larger sizes are available on special request
PE Pairs Count
First Number (PAIRS) Second GAUGE
Product Numbers for Shield Options
Approx. Wgt.
#/1000 Ft
Nom. OD (Inches)
Length
Gauge
Coated Alum
CACSP
Coated Alum
CACSP
Coated Alum
CACSP
(Feet)
6/19
7525504
7526502
127
180
0.52
0.57
5000
12/19
7525512
7526510
210
270
0.65
0.68
5000
25/19
7525538
7526528
395
465
0.82
0.85
5000
6/22
7525595
7526551
85
116
0.41
0.46
5000
12/22
7525603
7526569
125
170
0.50
0.55
5000
25/22
7525629
7526577
205
257
0.60
0.66
5000
50/22
7525637
7526585
365
440
0.78
0.85
5000
75/22
7525645
7526593
590
650
0.90
0.94
5000
100/22
7525652
7526601
665
765
1.02
1.07
2500
150/22
7525660
7071574
1070
1145
1.23
1.28
2500
200/22
7525678
7526619
1255
1380
1.36
1.41
2500
300/22
7525686
7526627
1830
1985
1.64
1.67
1250
400/22
7525694
7526635
2580
2715
1.89
1.96
1250
6/24
7525751
7071608
63
90
0.37
0.41
5000
12/24
7525769
7526668
87
120
0.42
0.46
5000
25/24
7525785
7526684
142
183
0.53
0.57
5000
50/24
7525793
7526692
240
300
0.64
0.68
5000
75/24
7525801
7526700
380
425
0.77
0.82
5000
100/24
7525819
7526718
435
510
0.83
0.88
5000
150/24
7525827
7526726
635
735
1.00
1.04
5000
200/24
7525835
7526734
795
900
1.08
1.13
2500
300/24
7525843
7526742
1145
1265
1.28
1.32
2500
400/24
7525850
7526759
1510
1655
1.47
1.52
2500
600/24
7525868
7526767
2260
2435
1.79
1.82
1250
900/24
7525876
7526775
3390
3585
2.16
2.20
1250
1200/24
7526973
7071616
4430
4635
2.47
2.45
1000
1500/24
7526981
-
5500
-
2.73
-
1000
1800/24
7526999
-
6660
-
3.03
-
1000
25/26
7525884
-
120
-
0.44
-
5000
50/26
7525892
-
200
-
0.57
-
5000
100/26
7525918
-
350
-
0.77
-
5000
200/26
7525934
-
615
-
0.96
-
5000
300/26
7525942
-
925
-
1.15
-
2500
400/26
7525959
-
1130
-
1.26
-
2500
600/26
7525967
-
1590
-
1.49
-
1250
Data subject to change without notice.
Contact your Customer Service Representative for latest information.
CORE CONSTRUCTION
Data Sheet 2007, Issue 12, 02/14/11, Page 2
APPLICATION(S)
-Intended for duct and direct buried installations where protection against water and moisture entry is required and may also be installed aerially
-The addition of the steel tape armor provides increased mechanical protection and gopher resistance
COMPLIANCE
-RDUP 7 CFR 1755.890 (RUS PE-89)
-RoHS Compliant (effective 1/1/10)
PACKAGING
-Standard lengths are shipped on non- returnable wood reels
-Non-standard packaging is available upon request.
TEMPERATURE RATING
-Storage and operation temperature range
-45°C to 80°C-> -49°F to 176°F
-Installation temperature range
-30°C to 60°C-> -22°F to 140°F
Conductors
Solid annealed copper; sizes 19, 22, 24 and 26 AWG
Insulation
Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color-coded in accordance with telephone industry standards
Twisted Pairs
Insulated conductors are twisted into pairs with varying lay lengths to minimize crosstalk
Core Assembly
25 pairs and less; pairs are assembled together in a single group
More than 25 pairs: pairs are arranged in groups, each group having a color –coded unit binder 1200 pairs and larger are mirror image color code.
Filling Compound
The entire core assembly is completely filled with ETPR compound , filling the interstices between the pairs and under the core tape
Core Wrap
Dielectric tape applied longitudinally with an overlap
Sheath option: Aluminum Shield
Corrugated, copolymer-coated, 0.008” Al tape applied longitudinally with an overlap
The sheath interfaces are flooded with an adhesive water blocking compound
Jacket (common to both sheath options)
Black, linear low density polyethylene
Sheath option: CACSP
Corrugated, copolymer-coated, 0.008” Al tape and 0.006” steel tape applied longitudinally over the aluminum tape with an overlap
The sheath interfaces are flooded with an adhesive water blocking compound
ELECTRICAL CHARACTERISTICS
19 AWG
22 AWG
24 AWG
26 AWG
DC Conductor Resistance: [max.] Ohms/mile. @ 68˚F
45
91
144
232
DC Resistance Unbalance: [max.] Average Cable Percent
1.5
1.5
1.5
1.5
Individual Pair Percent
5.0
5.0
5.0
5.0
Attn at 772 kHz: [nom.] dB/kft
3.2
4.5
5.6
7.1
1 kHz Mutual Capacitance: 6 and 12 pairs (avg: max)
All additional electrical and physical characteristics either meet or exceed those specified in RDUP RUS PE-89
Data subject to change without notice.
Contact your ATS Customer Service Representative for latest information at (866) 342-3721 .
CASPIC®-FSF PE 89 cables are designed for direct burial or duct applications where protection from moisture is required. CASPIC-FSF PE 89 cables are recommended for use in high-risk areas where additional mechanical or rodent protection is required. CASPIC-FSF may be used aerially, but must be attached to a support strand.SEALPIC®-FSF cables are designed for direct burial or duct applications where protection from moisture is required and aluminum shielding is required or desired.
American Tech Supply Is Your One Source For All Your Copper Cable-Data-Fiber Optic Needs- Price of PE 89 and PE 39 is based on daily fluctuations of raw copper costs on the www.LME.com or London Metal Exchange
West Coast Sales (866) 342-3721East Coast Sales (866) 650-DATA
ATS Carries Sizes From 6 Pair PE 89-To- 2400 Pair PE 89 Cable
American Tech Supply carries a complete line of PE89, stub cable, transition cable, and PE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair PE 89 to 200 pair PE 89 configurations. The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. Our PE 89 is made by General or Essex and meets all RUS standards. We have available other manufacturers upon request. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993. Depending on destination we will quote and supply PE 89 cable from General, Essex or other suppliers.
Direct Burial PE89 Aluminum Shield Outside Plant Telephone Cable, 24 AWG/100 pair
Nom. O.D.: .890"
Color: Black
Conductor: Solid annealed bare copper
Insulation: An inner layer of foamed natural polyolefin (PE89)
Twisted Pairs: Individual conductors twisted into pairs with varying lays to minimize crosstalk and with specified color combinations to provide pair identification
Shield: Shields are applied with overlapped edges and flooded with a flooding compound
Core Covering: Non-hygroscopic dielectric tape
Designed for use as a duct, aerial, or direct burial cable.
PRICING Of PE 89 Cable-American Tech Supply Is Your One Source For All Your Copper Cable-Data-Fiber Optic Needs- Price of PE 89 and PE 39 is based on daily fluctuations of raw copper costs on the www.LME.com or London Metal Exchange
Availability of all PE 89 and 39 Cables Are Custom Order
Ships Within 2-4 Business Days Of Placing Order
RDUP (RUS) PE-89 AL - 6 Pair, 19 AWG Filled Foam Skin Cable 5000' Black
Item #: ATSPE89-505 - RDUP (RUS) PE-89 AL - 6 Pair, 19-24 AWG Filled Foam Skin Cable 5000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color.Core Assembly:
6 pairs and less: pairs are assembled together in a single group.More than 6 pairs: pairs are arranged in groups, each group having a color coded unit binder.
Corrugated, copolymer-coated, 0.008" aluminum tape applied longitudinally with an overlap.
The sheath interfaces are flooded with an adhesive water-blocking compound.Compliance:
Rural Development Utility Program (RDUP) 7CFR 1755.890 (RUS PE-89)
Standard lengths are shipped on non-returnable wood reels.
Non-standard packaging is available upon request.Conductors: Solid, annealed copper; sizes 19 AWG
Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color coded in accordance with telephone industry standards.
RoHS Compliant (effective 1/1/10)
RDUP (RUS) PE-89 AL - 12 Pair, 19 AWG Filled Foam Skin Cable 5000' Black
Item #: ATSPE89-512 - RDUP (RUS) PE-89 AL - 12 Pair, 19 AWG Filled Foam Skin Cable 5000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
Item #: ATSPE89-3901-12/22 - RDUP (RUS) PE-89 AL - 12 Pair, 22 AWG Filled Foam Skin Cable Black Core Construction: Conductors: Solid, annealed copper; sizes 22 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 12 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-3864-12/24 - RDUP (RUS) PE-89 AL - 12 Pair, 24 AWG Filled Foam Skin Cable Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
Item #:ATSPE89-538 - RDUP (RUS) PE-89 AL - 25 Pair, 19 AWG Filled Foam Skin Cable 5000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
Item #: ATSPE89-3902-25/22 - RDUP (RUS) PE-89 AL - 25 Pair, 22 AWG Filled Foam Skin Cable 5000' Black Core Construction: Conductors: Solid, annealed copper; sizes 22 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 25 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-3865-25/24 - RDUP (RUS) PE-89 AL - 25 Pair, 24 AWG Filled Foam Skin Cable Black Core Construction: Conductors: Solid, annealed copper; sizes 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 50 Pair, 22 AWG Filled Foam Skin Cable- Black
Item #: ATSPE89-3903-50/22 - RDUP (RUS) PE-89 AL - 50 Pair, 22 AWG Filled Foam Skin Cable 5000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 50 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-3866-50/24 - RDUP (RUS) PE-89 AL - 50 Pair, 24 AWG Filled Foam Skin Cable Black Core Construction: Conductors: Solid, annealed copper; size 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 100 Pair, 22 AWG Filled Foam Skin Cable - Black
Item #: ATSPE89-3904-100/22 - RDUP (RUS) PE-89 AL - 100 Pair, 22 AWG Filled Foam Skin Cable 2500' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
Item #:ATSPE89-3867-100/24 - RDUP (RUS) PE-89 AL - 100 Pair, 24 AWG Filled Foam Skin Cable 1Ft Black Core Construction: Conductors: Solid, annealed copper; size 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin, color.
RDUP (RUS) PE-89 AL - 150 Pair, 24 AWG Filled Foam Skin Cable- Black
Item #: ATSPE89-827 - RDUP (RUS) PE-89 AL - 150 Pair, 24 AWG Filled Foam Skin Cable 5000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 200 Pair, 22 AWG Filled Foam Skin Cable Black
tem #: ATSPE89-3905-200/22 - RDUP (RUS) PE-89 AL - 200 Pair, 22 AWG Filled Foam Skin Cable 2500' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 22, and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 200 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-3868-200/24 - RDUP (RUS) PE-89 AL - 200 Pair, 24 AWG Filled Foam Skin Cable 1Ft Black Core Construction: Conductors: Solid, annealed copper; sizes 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 300 Pair, 22 AWG Filled Foam Skin Cable' Black
Item #: ATSPE89-3906-300/22 - RDUP (RUS) PE-89 AL - 300 Pair, 22 AWG Filled Foam Skin Cable 1500' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 300 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-3869-300/24 - RDUP (RUS) PE-89 AL - 300 Pair, 24 AWG Filled Foam Skin Cable Black Core Construction: Conductors: Solid, annealed copper; sizes 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 400 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-3870-400/24 - RDUP (RUS) PE-89 AL - 400 Pair, 24 AWG Filled Foam Skin Cable Black Core Construction: Conductors: Solid, annealed copper; size 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 1200 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-873 - RDUP (RUS) PE-89 AL - 1200 Pair, 24 AWG Filled Foam Skin Cable 1000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 1500 Pair, 24 AWG Filled Foam Skin Cable Black
Item #: ATSPE89-981 - RDUP (RUS) PE-89 AL - 1500 Pair, 24 AWG Filled Foam Skin Cable 1000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 1800 Pair, 24 AWG Filled Foam Skin Cable Black
Item #:ATSPE89-999 - RDUP (RUS) PE-89 AL - 1800 Pair, 24 AWG Filled Foam Skin Cable 1000' Black Core Construction: Conductors: Solid, annealed copper; sizes 19, 221 and 24 AWG Insulation: Dual insulation consisting of an inner layer of foamed polyolefin surrounded by a solid polyolefin skin. We have PE 89 in various pair and AWG- gauges available in custom lengths that require a "cut charge". Please call us at (866) 650-DATA or (866) 650-3282
RDUP (RUS) PE-89 AL - 1800 Pair, 24 AWG Filled Foam Skin Cable 1000' Black
ATS can provide PE 89 in most sizes from 6 pair PE 89 to 2400 Pair PE 89 from 19 gauge to 24 gauge. Please note there may be minimums, specials,overstocks, etc but all pricing is based on the LME daily copper price.
6 Pair PE 89 Cable - Cable is cut to order- 19 gauge- 6 pair PE 89
Call
PE 89 Cable Part #ATS OSPPE89-12
12 Pair PE 89 Cable- Cable is cut to order-19 Gauge 12 Pair PE 89 Cable
Call
PE 89 Cable Part #ATS OSPPE89-18
18 Pair PE 89 Cable -Cable is cut to order-18 pair- 19 gauge 18 Pair PE 89 Cable
Call
PE 89 Cable Part #ATS OSPPE89-25
25 Pair PE 89 Cable -Cable is cut to order- 19 gauge 25 Pair PE 89 Cable
Call
PE 89 Cable Part #ATS OSPPE89-50
50 Pair PE 89 Cable .278lbs/foot Cable is cut to order
Call
PE 89 Cable Part #ATS OSPPE89-75
75 Pair PE 89 Cable - Cable is cut to order
Call
PE 89 Cable# ATSOSPPE89-100
100 Pair PE 89 Cable .484lbs/foot Cable is cut to order
Call
PE 89 Cable# ATSOSPPE89-150
150 Pair PE 89 Cable .484lbs/foot Cable is cut to order-19 Gauge 150 pair PE 89 Cable
Call
PE 89 Cable Part# OSPPE89-200
200 Pair .PE 89 Cable 945lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-300
300 Pair PE 89 Cable 1.272lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-400
400 Pair PE 89 Cable .1.66lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-600
600 Pair PE 89 Cable 2.532lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-900
900 Pair PE 89 Cable 3.868lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1200
1200 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1500
1500 Pair PE 89 Cable 6.215lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1800
1800 Pair PE 89 Cable 7.385lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2100
2100 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2400
2400 Pair PE 89 Cable 9.910lbs/foot Cable is cut to order
Call
For Complete 20 Foot and 40 Foot Container Load Cable Descriptions For PE 89 Visit Our Whole Division
Outdoor- Underground CAT 5e- CAT 6 Cable- More Info- American Tech Supply stocks thousands of direct bury CAT 5e cable, underground CAT 5e cable-Direct Bury CAT 6 cable-More Info
Please Call For all Copper Cable Pricing -Since Late 2005 Raw Commodity Prices For Copper and Oil Based (PVC) Products Change Daily - Call For Latest Pricing For Our Our PE 39 & PE 89 Cables
Stub Cable- Transition Cable-PE 89, 25 Pair PE 89, Copper Telecom Cables,Seal Pic FSF PE 89- Transition Cables- Seal Pic FSF PE 39- Stub Cables- Direct Bury Copper Telecom Cables-Icky Pick
ATS carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).American Tech Supply carries a complete line of stub cable, transition cable, andPE 89 direct bury copper telephone cables including the Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables which come in 25 pair to 200 pair PE 89 configurations.
The PE 89 or Seal Pic FSF PE 89 and Seal Pic FSF PE 39 cables are used for distribution and long distance networks. The Seal Pic FSF 89 comes in 22 gauge and 24 gauge copper cable. The Seal Pic FSF 39 cables come in 19 gauge and 22 gauge coper. These cables are installed into ducts. One of our manufacturers, Hesfibel provided the majority of the recent Times Warner build out and operates on the principle of minimum error and the provision of high quality products and total customer satisfaction. Hesfibel has been awarded the TSE-ISO 9002 quality certification since 1993.
PE 89 Cable
Our PE 89 Cable Comes in Several Reel Lengths- Some Cut Charges May Apply
PE 89 Cable
Type PE 89 Copper Cable
Price Per Foot- CALL
PE 89 Cable Part #ATS OSPPE89-06
6 Pair PE 89 Cable - Cable is cut to order- 19 gauge- 6 pair PE 89
Call
PE 89 Cable Part #ATS OSPPE89-12
12 Pair PE 89 Cable- Cable is cut to order-19 Gauge 12 Pair PE 89 Cable
Call
PE 89 Cable Part #ATS OSPPE89-18
18 Pair PE 89 Cable -Cable is cut to order-18 pair- 19 gauge 18 Pair PE 89 Cable
Call
PE 89 Cable Part #ATS OSPPE89-25
25 Pair PE 89 Cable -Cable is cut to order- 19 gauge 25 Pair PE 89 Cable
Call
PE 89 Cable Part #ATS OSPPE89-50
50 Pair PE 89 Cable .278lbs/foot Cable is cut to order
Call
PE 89 Cable Part #ATS OSPPE89-75
75 Pair PE 89 Cable - Cable is cut to order
Call
PE 89 Cable# ATSOSPPE89-100
100 Pair PE 89 Cable .484lbs/foot Cable is cut to order
Call
PE 89 Cable# ATSOSPPE89-150
150 Pair PE 89 Cable .484lbs/foot Cable is cut to order-19 Gauge 150 pair PE 89 Cable
Call
PE 89 Cable Part# OSPPE89-200
200 Pair .PE 89 Cable 945lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-300
300 Pair PE 89 Cable 1.272lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-400
400 Pair PE 89 Cable .1.66lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-600
600 Pair PE 89 Cable 2.532lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-900
900 Pair PE 89 Cable 3.868lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1200
1200 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1500
1500 Pair PE 89 Cable 6.215lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-1800
1800 Pair PE 89 Cable 7.385lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2100
2100 Pair PE 89 Cable 5.235lbs/foot Cable is cut to order
Call
PE 89 Cable Part# OSPPE89-2400
2400 Pair PE 89 Cable 9.910lbs/foot Cable is cut to order
Call
Telecommunications Cables FAQs Text (see below)
What is the temperature range that outside plant cable can withstand?
For storage and operation: -45 degrees to 80 degrees Celsius
-49 degrees to 176 degrees Fahrenheit
For installation: -30 degrees to 60 degrees Celsius
-22 degrees to 140 degrees Fahrenheit
What is the bend radius of outside plant cable?
The bend radius for all Outside PIC cable is not less than 10 times the diameter (O.D.) of the cable. For example, if the cable O.D. is .52 inches, then the bend radius for that cable is not less than 5.2 inches.
What is the maximum pulling tension or tensile strength that can be placed on outside plant cable?
It is calculated based on the pair count and gauge of the conductors.
19 AWG = the maximum force is 22.1 lbs. per pair
22 AWG = the maximum force is 11.0 lbs. per pair
24 AWG = the maximum force is 6.6 lbs. per pair
26 AWG = the maximum force is 4.4 lbs. per pair
Are outside plant products Category 3 compatible?
In sample testing it was determined that our filled and air core cable meet or exceed Category 3 transmission requirements. Please note that RUS(REA) specification does not require testing to category 3 parameters.
Can outside plant cable be submersed in water?
We do not recommend submersing outside plant products in water. If a customer requires that a particular product be installed in water, please contact our Engineering department for suggestions
ATS carries PE – 89 Communication Cable which comes in a six (6) pair cable configurations up to 2400 pairs manufactured for the purpose of direct burial systems communication applications in accordance with the National Electric Code.Conductor construction is soft drawn bare copper meeting the requirements of ASTM Specification B-3. The conductors are 22 awg solid copper.The conductors are insulated with polyethylene (PE) in distinctive colors to facilitate pair identification and are twisted into pairs with varying lays to minimize crosstalk.The interstices between the pairs are filled with an 80 C filling compound and covered with a low density, high molecular weight black polyethylene (PE).
Part Numbers: Please Note after ATSPE89 or ATSPE39 is the "number of copper cables"
PE 89 Cables: ATSPE89-50
PE 39 Cables: ATSPE39-50
Application:
Suitable for use as direct burial communication applications where protection against water and moisture entry is a critical requirement. PE – 89 is recommended where rodent attack is possible.SEAL PIC-FSF is designed as a duct, aerial or direct burial cable in either exchange area service or trunk service. The core is filled with an 80 degree Centigrade filling compound and the sheath interfaces are flooded with a flooding compound. The polymer coating provides additional corrosion protection for the aluminum shield.
PE 22 OSP Cable Available in strand counts from 6 to 2100, with various wire gauges. Insulated conductors are color coded to telephone industry standards. For aerial installation by attachment to a support strand and/or underground installation in a duct
P 89 Cable Avaialable in pair counts from 6 to 1800 and variouse wire gauges, Insulated conductors are color coded to telephone industry standards. Used primarily in buried and ducted environments where moisture protection is needed. Also available with armoring for increased mechanical protection.
ATS Part Number
Description
Due To Fluctuating Wholesale Oil Costs Call For Pricing
The assembly is then wrapped with two metal shield tapes:
- A corrugated .008" thick polymer coated aluminum tape and a corrugated .006" polymer coated steel tape.
REA PE-89
CONDUCTOR: Solid annealed bare copper, sizes 19 AWG (.9mm ), 22 AWG (.64mm), and 24 AWG (.5mm).
INSULATION: Inner layer of foamed natural polyolefin covered by outer layer of solid colored polyolefin, color coded in accordance with standard telephone industry code.
TWISTED PAIRS: Individual conductors twisted into pairs with varying lays to minimize crosstalk and with specified color combinations to provide pair identification.
CABLE ASSEMBLY: Cables having 25 pairs or less are assembled in a single group. Cables having more than 25 pairs are assembled in units, each individually identified by color coded unit binders. The interstices between the pairs are filled with an 80 degree Centigrade filling compound.
CORE COVERING: Non-hygroscopic dielectric tape.
SHIELD: SEALPIC-FSF-Electrically continuous 0.008 in. (0.2mm) thick polymer coated, corrugated aluminum tape applied longitudinally with overlapped edges and flooded with a flooding compound.
JACKET: Black polyethylene.
IDENTIFICATION AND LENGTH MARKING: Manufacturer's identification, pair count, conductor size, and year of manufacture are surface marked on the jacket at 2ft. intervals. Sequentially numbered length markings are located at alternate 2 ft. intervals.
MEETS REA SPECIFICATION PE-89, LATEST ISSUE.
*REA PE-39 available upon request.
Inner Jacket: Polyethylene (PE)
Outer Jacket: Polyethylene (PE)
Temperature: 60 C
Resistance: 17.235 OHMS PER M FEET at 68 DEG. F
Call for pricing, minimum order $500.00- Please- ATS offers cutting of cable-For custom cable lengths at an additional cost-
West Coast (866) 342-3721
New Southern CA Office ( 760) 471-8200
East Coast (866) 650-3282
For More Information On Any of the Products Below- Just click on the Pictures -More Information and Specifications For PE 39 and PE 89 Below
PE 89 Application:
For use in wet environments where protection from moisture is required. Approved for direct burial, duct or aerial installations when supported by a messenger.
PE 89 Conductors:
Solid soft bare annealed copper. Individual conductors are twisted into pairs with varying lay lengths to minimize crosstalk.
PE 89 Insulation:
Dual layer of foamed polyolefin and solid polyolefin.
PE 89 Filling Compound:
Cable core is filled with an extended thermoplastic rubber (ETPR) filling the interstices between the pairs and under the core tape.
PE 89 Core Wrap:
Non-hygroscopic, dielectric tape with overlap.
PE89 Shield:
Corrugated, copolymer coated, 8-mil aluminum tape longitudinally applied with overlap. The shield interfaces are flooded with an adhesive compound to provide a moisture barrier and inhibit corrosion.
PE 89 Jacket:
Black, sunlight-resistant, linear low-density polyethylene.
Additional Standards:
ANSI/ICEA S-84-608-1994 RUS 7 CFR 1755.890 (formerly REA PE-8
Stub Cable
Stub Cable- Stub Cable is factory process filled cable that is cut to customer specified lengths eliminating time-consuming cable preparation at the customer job site. The Stub Cable features a factory installed pneumatic cable "block" on one end of the cable (a variety of cable types are available; 22, 24, 26 gauge cable with pair counts from 50 to 1800 pair sizes). The cable block prevents air and/or filling compound leakage from pressurized cable plant to non-pressurized cable plant. The cable block is typically located 120 inches from one end of the cable and is sealed using state of the art blocking compounds. The cable block is small in diameter relative to the cable diameter to minimize obstructions and clearances from adjacent cable plant.
Transition cable- Transition Cable is a factory processed filled cable that is pre-cut to custom lengths. This eliminates time-consuming on-site preparation and the use of hazardous cleaning chemicals in the field. Additionally, cables can be provided with optional factory-installed connector modules and pulling eyes.
LOW PRICE GUARANTEE: American Tech Supply will NOT BE UNDERSOLD. Just provide us with a written quote from any US competitor and American Tech Supply will MEET or BEAT their price! Call Us For Additional Details At (866) 342-3721
Were here to help you solve your business challenges and increase your ability to meet your own customers growing expectations from their telecommunications service providers.
West Coast Sales (866) 342-3721
East Coast Sales (866) 650-DATA
Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives