Signamax, Signamax 065-1167, 10/100BaseT/TX Ethernet Extender Media Converter, Signamx Media Converters, Unmanaged Media Converters Standalone and Chassis-Mountable, 100BaseFX Solutions, Gigabit Ethernet, 10BaseFL Solutions, Asynchronous Transfer Mode Solutions, Ethernet Extension Solutions, Rack Mount Media Converter Chassis

Product Categories

About Us

cable, vdsl, patch

Signamax- Signamax 065-1167- 10/100BaseT/TX Ethernet Extender Media Converter- Signamx Media Converters- Unmanaged Media Converters Standalone and Chassis-Mountable- 100BaseFX Solutions- Gigabit Ethernet- 10BaseFL Solutions- Asynchronous Transfer Mode Solutions- Ethernet Extension Solutions- Rack Mount Media Converter Chassis

Ethernet Extension Solutions
10/100BaseT/TX Ethernet Extender Media Converter

Gigabit Ethernet Solutions

10/100BaseT/TX Ethernet Extender Media Converter

OVERVIEW

Signamax Connectivity Systems' model 065-1167 is a point-to-point Ethernet Extender that efficiently extends 10/100 Ethernet circuits to over 1,960 feet (600 meters) at 30 Mbps using existing straight pair copper wire. The 065-1167 allows Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution to Ethernet on the factory floor where systems have been upgraded from slower serial data communication to Ethernet networking. The 065-1167 is used in pairs to extend Ethernet connectivity over existing voice grade copper wire. Installation is easy; a single switch setting allows each unit to be set either for local operation at the near side of the circuit, or remote operation when used at the other end of the circuit.

SPECIFICATIONS :

APPLICABLE STANDARDS

Ethernet IEEE 802.3

FIXED PORT SPECIFICATIONS

Models 065-1140 & 065-1150:
RJ-45 connector, 100 meters maximum distance 10BaseT twisted pair cable interface
Model 065-1140:
ST connector; 2000 meters maximum distance 10BaseFL multimode fiber optic interface
Model 065-1150:
SC connector; 15 kilometers maximum distance 10BaseFL singlemode fiber optic interface

PERFORMANCE

Delay: less than 23 bit times

PHYSICAL CHARACTERISTICS

Case dimensions:
4.33"L x 3.19"W x 0.91"H (110mm x 81mm x 23mm)
Fiber connector protrusion varies with model.
Weight: 0.35 pounds (160 grams)

LED INDICATORS

Per Unit: Power (rear panel)
Per Port: LNK: Illuminated when receiving link pulses from a compliant device;
RCV: Illuminated or flashing when data packets are being transmitted / received
Five LEDs total

ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: 32°F ~ 122°F (0°C ~ 50°C)
Storage Temperature: -4°F ~ 158°F (-25°C ~ 70°C)
Operating Relative Humidity: 10 ~ 80%, non-condensing
Storage Relative Humidity: 5 ~ 90%, non-condensing

POWER

External power adapter: 12 Volts DC; 0.8 A

EMISSIONS

FCC part 15 Class A, CE Mark

SAFETY UL Listed

WARRANTY Lifetime

Part Number	Description
065-1167	10/100BaseT/TX Ethernet Extender Media Converter
065-1167DIN	10/100BaseT/TX Ethernet Extender Media Converter with preattached DIN-rail mount

Unmanaged Media Converters - Standalone and/or Chassis-Mountable

100BaseFX Solutions

10/100BaseT/TX to 100BaseFX Converters	10/100BaseT/TX to 100BaseFX Converters w/USB Power Option	10/100BaseT/TX to 100BaseFX Single Fiber Converters
100BaseTX to 100BaseFX Converters	100BaseFX Singlemode to Multimode Converters

Gigabit Ethernet Solutions

10/100/1000BaseT/TX to 1000BaseSX/LX Converters

1000BaseT to 1000BaseSX/LX Converters

10BaseFL Solutions 10BaseT to 10BaseFL Converters	Asynchronous Transfer Mode (ATM) Solutions ATM Singlemode to Multimode Converters
Ethernet Extension Solutions 10/100BaseT/TX Ethernet Extender Media Converter	Rack Mount Media Converter Chassis 16-Bay Rack Mount Media Converter Chassis

Signamax Media Converters

Unmanaged Media Converters Standalone and Chassis-Mountable	Unmanaged Standalone Media Converts	Unmanaged Multichannel Media Converts
Managed Media Converts		Serial Data to Ethernet Device Servers/Media Converters