The Active CWDM solution combines passive optical CWDM technology with Metrobility line cards and superior network element management through NetBeacon ESP to achieve maximum flexibility, scalability, and manageability.
Metrobility Gigabit 1Gbps Interface Line Cards & Standalones
Features:
Singlemode RJ-45 and SC with fixed optics
Multimode RJ-45 and SC with fixed optics
Multimode or singlemode SX to singlemode LX, EX, SX, SC with fixed optics
Singlemode RJ-45 and LC with SFP optics
Multimode RJ-45 and LC with SFP optics
Singlemode or multimode LC with SFP optics
CWDM SFP Optics
2km, 5km, 10km, 20km, 40km, 70km and 100km options which may be cascaded to achieve extended distance over 200km
Signal retiming and regeneration
Link Loss Return (LLR), Link Loss Carry Forward (LLCF) and Copper Loss Carry Forward (CLCF) aid in troubleshooting remote network connections
Full and half-duplex support
BWDM models double the fiber capacity on existing fiber cables
Models:
R152 Line Cards
R153-1S Line Card with SFP optics
Metrobility R380 Multi-Rate Line Card (44.7Mbps to 2.7Gbps)
The Metrobility® Multi-rate Line Card (MRLC) by Telco Systems provides a transparent interface for multimode, singlemode, BWDM (single-strand bi-directional wavelength division multiplexing), and CWDM across a wide range of protocols with data rates ranging from 44.7Mbps to 2.7Gbps.
The R380 Multi-rate Line Card supports DS3, Ethernet, SONET/SDH, fibre channel, and ESCON protocols. Data rate is determined by DIP switch setting on the card, or by software auto-detection, or manual settings in the Metrobility NetBeacon® ESP or WebBeacon™ element management software.
The MRLC provides the ability to connect optical network segments operating at different wavelengths, including CWDM lambdas, as well as SFP-based multimode and singlemode optics.
Metrobility R861 Next Generation Services Line Cards
As a carrier-class device, the Metrobility R861 Services Line Cards for Ethernet by Telco Systems provide an intelligent optical Ethernet CPE demarcation point for service providers who are deploying Ethernet in the First Mile. The R861 Services Line Cards are specifically designed to maintain the maximum isolation between the public and private network while offering the Operations, Administration and Maintenance (OAM) aspects of the IEEE 802.3ah standard as defined by both the IEEE and the Metro Ethernet Forum (MEF). These OAM management features provide loopbacks, MIB statistics, errored frame events, and “Dying Gasp” capabilities. These features allow keep-alives for transparent service monitoring.
The R861 Services Line Cards supports delivery of E-Line services. Traffic belonging to each service is classified by, and tunneled over, pre-determined VLANs for segregation and transport across carrier networks. Controlled at the Services Line Cards, VLANs identify and segregate the specific ISP-access or corporate-access E-Line service. Proxy-based Management is via the Metrobility NetBeacon ESP Element Manager.
Metrobility R851 Gigabit Services Line Card
Metrobility® Services Line Card for Gigabit Ethernet by Telco Systems provides an intelligent optical Ethernet demarcation point for service providers who are deploying Ethernet in the First Mile. The Services Line Card extends baseline VLAN technologies to enable delivery of multiple, converged services across the first-mile, optical access network. These services include transport (link-specific) OAM, interconnectivity (network-specific) OAM, and services (applicationspecific) OAM.
The Gigabit Ethernet Services Line Card offers multiple management schemes designed to meet the needs of the services provider who may need to manage a remote device via SNMP using an IP address today but may want to migrate to a more robust, secure, scalable and flexible proxy-based management framework.
As a carrier-class device, the Services Line Card is specifically designed to maintain the maximum isolation between the public and private network while supporting the OAM requirements defined by both the IEEE and the Metro Ethernet Forum (MEF).
Metrobility R821 10/100Mbps Services Line Card
Metrobility® R821 Services Line Card by Telco Systems provides an intelligent optical Ethernet demarcation point for service providers who are deploying Ethernet in the First Mile. As a carrier-class device, the Services Line Card enables multi-service delivery across a provisioning framework. Applications are prioritized over different traffic-engineered paths; multi-level operations, administration and maintenance (OAM) is used to measure and ensure provisioned SLAs; and embedded security controls ensure protection against denial-of-service attacks.
The 10/100Mbps Services Line Card offers multiple management schemes to provide service providers with a choice of direct internet-standard management using SNMP, remote CLI, IEEE 802.3ah, or a more robust, secure, scalable and flexible proxy-based management through the NetBeacon® ESP Element Manager.