S
Stocks ALL CAT 6 CMR Riser- CAT 6 PVC- CAT 6 Plenum Cable- CAT 6
Outdoor Cable- CAT 6 Shielded Cable-Outdoor CAT 6- Outdoor
Aerial CAT 6-Outdoor Gel
All
our CAT 6 PVC cable and CAT 6 Plenum Cables are UL Listed and ETL
verified. If your business
depends on networking count on us for all of your structured wiring
Cat6 CMR Riser Cable, CAT 6 Plenum cable, CAT 6 shielded cable and
the new 10 Gigabit CAT 6 cable both in plenum and non- plenum. Our
new CAT 6 gigabit cables- the CAT 6A , 10 Gigabit Cable comes in
Plenum and PVC Riser in Gray only and on wooden reels at about 45
pounds per reel. The Cat6 and Cat5e UTP cables we carry allow
voice-data convergence and support for Gigabit Ethernet. Choose
from industry leading copper solutions from ABA, Coleman, Avaya
SYSTIMAX GigaSPEED, Avaya SYSTIMAX PowerSUM, Belden, Berk-Tek LANmark,
Commscope and Superior Essex. Available in both plenum and non-plenum
Standards supported: 10/100/1000BaseT, 155/622
ATM, 568A/B. Wire and cable specifications available.We
also have below out CAT 6 outdoor rated or CAT6 direct bury cables.
See Below.
CAT6
CMX Direct Bury Cable
CAT6 Outdoor-
PVC Cable
PART#1KUTP-CAT6
CMX
CAT6 CMX Direct Bury Cable- Double PVC Shield-NOT METAL! PVC-PART
NUMBER ADSK6E-1KUTP-CAT6
CMX- $ 249/1000 Feet
$
249.00/1000 Feet -Call For Colors
CAT
6 Gel Filled
CAT6 GEL
FILLED DIRECT BURY- PVC Cable
PART#1KUTP-CAT6
CMXF
THIS
IS GEL FILLED CAT 6 DIRECT BURY-CAT 6 Gel Filled AWG VERIFIED
DIRECT BURIAL (FLOODED) OUTDOOR UV - PART
NUMBER 1KUTP-CAT6 CMXF
$
299.00/1000 Feet -Call For Colors
CAT
6 Shielded -Mylar Foil With Messenger
CAT
6 Shielded -Mylar Foil With Messenger AWG VERIFIED DIRECT
BURIAL
PART#1KUTP-CAT6
CMXFT
CAT
6 Shielded -Mylar Foil With Messenger AWG VERIFIED DIRECT BURIAL
(FLOODED) OUTDOOR UV-PART NUMBER
1KUTP-CAT6 CMXFT
$
310.00/1000 Feet -Call For Colors
American
Data Supply Carries a complete line of outdoor rated 6 and outdoor
rated aerial CAT 6 cable & from several top manufacturers and
our CAT6 cables performance ratings range from 400 MHZ- to 550 MHZ
to 600 MHZ. Please review the large selction of CAT6 cables below
-each CAT6 cable has a different performance -bandwidth capability
now required for gigabit performance for your internal networks
and outdoor perfomance to run IP cameras. American Data Supply also
stocks most of our CAT 6 cables including our CAT 6 outdoor, CAT
6 aerial cable, CAT6 outdoor rated, CAT 6 gel filled and CAT 6 shielded
cable. Below find our standard CAT 6 to our plnume rated CAT 6 cable
to our Gigabit rated CAT 6cable.
CAT
6 PVC CABLE $169.00/1000 Feet - Call For latest Pricing
and Special Discounts!
American
Data Supply also offer tremendous DISCOUNTS and will MEET or BEAT
any USA based pricing for BULK CAT 5e and CAT 6 Cables- Please call
us at (866) 342-3721 for pallet pricing with cable prices as low
as $ 125/1000 feet.
CAT6
PVC Cable
K6-1KSTP-(Color)
CAT6
550MHz Cable, 24AWG, STP, 4 Pairs, 1000', Blue- WHite- Red-
Green- Call For Colors In Stock!
Part
Number -TUR2304S03xx-CAT 6A - 10 Gigabit RISER- PVC- Call For Pricing
(866) 342-3721
Part
Number - TUP2304S03xx -CAT 6A 10 Gigabit Plenum - Call For Pricing
(866) 342-3721
ELITE
10GS LAN SUPPORTS IEEE 802.3an 10GBASE-T STANDARD, AND TIA/EIA 568-B.2-10
DRAFT.7
ALL MATERIALS COMPLY WITH ROHS STANDARD
TEST RANGE FROM 1 TO 750 MHZ
GREAT PERFORMANCE WITH HEADROOM OF UP 6Db
CONSTRUCTION
RISER/PLENUM
Jacket: Low-smoke, flame-retardant PVC
Insulation: PE/FEP
Spline: PE/FEP
Conductor: 23 AWG Solid bare copper
Cable assembly: 4 pairs cabled together with
a spline core separator
EAR
END CROSSTALK (PS NEXT):
DCR UNBALANCE: 3%MAX 42.3- 15log(f/100) dB/100M MIN
CAPACITANCE UNBALANCE ATTENUATION TO CROSSTALK RATIO FAR END(ACRF):
PAIR/GROUND: 330PF/100M MAX 31.8- 20log(f/100) dB/100M MIN
CHARACTERISTIC POWER SUM ATTENUATION TO CROSSTALK RATIO FAR END
IMPEDANCE: 100W ±10%(10-550MHz) (PS ACRF): 28.8- 20 log(f/100)
dB/100M MIN
INPUT IMPEDANCE: 100W ±12%(1-100MHz) POWER SUM ALIEN NEAR
END CROSSTALK (PS ANEXT):
100W ±15%(>100-350MHz) 66.5- 15 log(f/100) dB/100M MIN
100W ±22%(>350MHz) POWER SUM ALIEN ATTENUATION TO CROSSTALK
RATIO
RETURN LOSS: 20+7log(f) dB MIN (1-10MHz) FAR END (PS AACRF): 42.2-
20 log(f/100) dB/100M MIN 67dB MIN
27 dB MIN(10-20MHz) PROPAGATION DELAY: 534 + 36/ ns/100m MAX
27-7log(f/20)dB MIN (>20MHz) PROPAGATION DELAY SKEW: 25 ns/100m
MAX
INSERTION LOSS: 1.8+0.01 +0.2/
dB/100M MAX NOMINAL VELOCITY OF PROPAGATION (NVP):
(ATTENUATION) NEAR END(NEXT) CROSSTALK: 70% PLENUM 66% NON-PENUM
44.3 - 15 log(f/100) dB/100M MIN NOTE: Attenuation To Crosstalk
Ratio Far End (ACRF) was
previously referred to as Equal Level Far End Crosstalk (ELFEXT)
WHERE f = FREQUENCY IN MHz from 1 to 500 MHz
Part
Number- ABADSR2304S03GY-CAT 6A - 10 Gigabit RISER-SHIELDED- PVC
- Call For Pricing (866) 342-3721
Part
Number -ABADSP2304S03xGY-CAT 6A 10 Gigabit Plenum -SHIELDED-PLENUM-
Call For Pricing (866) 342-3721
ELITE
10GS LAN SUPPORTS IEEE 802.3an 10GBASE-T STANDARD, AND TIA/EIA 568-B.2-10
DRAFT.7
ALL MATERIALS COMPLY WITH ROHS STANDARD
TEST RANGE FROM 1 TO 750 MHZ
GREAT PERFORMANCE WITH HEADROOM OF UP 6Db
CONSTRUCTION
RISER/PLENUM
Jacket: Low-smoke, flame-retardant PVC
Insulation: PE/FEP
Spline: PE/FEP
Conductor: 23 AWG Solid bare copper
Cable assembly: 4 pairs cabled together with
a spline core separator
ARE
READY TO SHIP THE SAME DAY- SEE OUR CAT 6 CABLES BELOW-
We
carry outdoor CAT 6 cable outside plant cable, Rugged Outdoor rated
CAT 6 direct buried cable , loose tube fiber cable, aerial fiber
cable, long haul fiber cable, outdoor fiber cable, toneable duct,
armored fiber cable, PE 39, PE 89 and a complete line of fiber
optic cable assemblies.
Our
standard CAT 6 outdoor rated direct bury cable and CAT 6 direct
bury cable comes with a 15 year standard warranty. These
outdoor rated CAT 6 cables come in several varieties. Our rugged
economy line of outdoor rated CAT 6 cables come in standard direct
bury, gel filled direct bury and aerial with messegnder cat6 cable.Our
DIRECT BURY - GEL FILLED CAT 6 Cable is rated at 600MHZ Part Number
ADSK6-1KUTP-CMXF-BK.
Our
aerial shielded CAT 6 cable is also a 400 MHX CAT 5E cable that
is designed for aerial- overhead applications- Part
Number: ADSK6E-1KUTP-CMXT.
We
also have a direct bury double PVC shield not gel and not metal-CAT
6 cable CMX
Direct Bury Cable- Double PVC Shield-NOT METAL- PVC-PART
NUMBER ADSK6E
We
also have other industrial grade and military grade cable designed
for use in industrial and for the military for muse in the battlefield.
These outdoor rates cable are also for direct buried, duct or aerial
applications, the (763108- Call For Discounts-) when Cat5e performance
is needed to withstand weather or temperature extremes - aluminum
armored outdoor rated CAT 5e cable( Part # 763208) and steel armored
outdoor rated CAT 5e Cable (Part #763308) versions available.
The Outdoor rated CAT5 e cables we stock are the direct bury CAT
5e cables specifically manufactured for underground use, aerial
and multi-aerial and underground. They are filled with a thixatropic
gel the blocks and absorbs moisture if the cable is penatrated in
anyway- thus protecting your cable plant. The next type of CAT 5e
and Cat 6 outdoor cables are the CMXT aerial and aerial mixed use
cat 5e and CAT 6 osp cables. The first is the Aerial Only CMX series
that has an outer UV-ultraviolet shield , a second aluminum- mylar
shield, a third PVC shield and a steel messenger that acts as a
strength member and an electrical conductor to conduct EMP and other
electrical charges away from 4 pairs of cables carrying your valuable
data.The third most common is the CMXFT "combo" aerial-
direct bury CAT 5e cable & CAT 6 cables that can be place underground
or used as an aerial cable as well. They range in price from $ 159-$
179.00 per 1000 foot boxes for CAT 6 and start at $ 249.00 for CAT
Cable.
Our
Outdoor CAT6 cables are from 400 MHZ- 550MHZ and 600 MHZ. Please
call us at (866) 342-3721 for additional information.
Coleman
Cable has introduced a bundled cable (#99276) that features two
Cat 6 and two RG6 Quad cables, designed to power a wide variety
of residential applications including voice, data, video, CATV,
HDMI and more.Call (866) 342-3721 For more info.
All
our CAT 6 PVC cable and CAT 6 Plenum Cables are UL Listed and ETL
verified. If your business
depends on networking count on us for all of your structured wiring
Cat6 CMR Riser Cable, CAT 6 Plenum cable, CAT 6 shielded cable and
the new 10 Gigabit CAT 6 cable both in plenum and non- plenum. Our
new CAT 6A , 10 Gigabit Cable comes in Plenum and PVC Riser in Gray
only and on wooden reels at about 45 pounds per reel. The Cat6 and
Cat5e UTP cables we carry allow voice-data convergence and
support for Gigabit Ethernet. Choose from industry leading copper
solutions from ABA, Coleman, Avaya SYSTIMAX GigaSPEED, Avaya SYSTIMAX
PowerSUM, Belden, Berk-Tek LANmark, Commscope and Superior Essex.
Available in both plenum and non-plenum Standards supported:
10/100/1000BaseT, 155/622 ATM, 568A/B. Wire and cable specifications
available.
UL/cUL
Listed CMR, CMP Conductor: 23AWG bare solid copper Jacket: FRPVC
UL, ETL and 3P Verified to Standards Insulation: FRPE (CMR), FEP
(CMP)
ISO/IEC-11801
NEMA WC 63.1
Applications
SUPPORTS CURRENT CATEGORY FIVE APPLICATIONS SUCH AS 100 BASE TX,
100 BASE VG ANYLAN, AND 155 ATM. IDEAL FOR USE IN HIGH BANDWIDTH
EXISTING OR FUTURE APPLICATIONS SUCH AS 622
ATM AND GIGABIT ETHERNET.
1000
UTP cable is intended for current future and high-speed data and
multimedia applications including:
IEEE
802.3 1000Base-T, 1000Base-TX
100Base-VG
ATM,
155Mbps
ANSI
X3.263 100Mbps/sec
CAT 6 PLENUM CABLE $399.00/1000 Feet- Call For latest Pricing
American
Data Supply now has one of the largest supplies and selections of
CAT 6 Cable-CAT 6 patch cords and CAT 6 patch cables- Due to rapidly
fluctuating market prices on commodities such as oil- copper- etc
that make up CAT 5e Cable and CAT 6 cable - UL/cUL Listed CMR, CMP
Conductor: 23AWG bare solid copper Jacket: FRPVC
UL, ETL and 3P Verified to Standards Insulation: FRPE (CMR), FEP
(CMP)
ISO/IEC-11801
NEMA WC 63.1
Industry
Standards: Material Descriptions:
UL444 Conductor: 23AWG bare solid copper Ripcord: Under jacket UL, ETL and 3P Verified to Standards Insulation:
HDPE Jacket: CMX, UV Rated
ISO/IEC-11801
TIA/EIA 568-B.2-1
RoHS
CAT6
PLENUM Cable -400 MHZ
CAT6
400MHZ PLENUM PART#ABATUP2404N70XX
CAT6
400 MHz Cable, 24AWG, STP, 4 Pairs, 1000', Blue
$
349.00/1000 Feet -Call For Colors
CAT6
PLENUM Cable -600 MHZ
CAT6E
600MHZ PLENUM PART#ABATUP2404N70XX-S
CAT6
600 MHz Cable, 24AWG, STP, 4 Pairs, 1000', Blue
Belden
Mediatwist 1872A Bulk Cat6 Cable Reel 1000 FT non-plenum
Unique Jacket design locks pairs in each chamber, bonded pairs provide
full 550 MHz performance after taking the installation abuse from
cable pulls.Bonded pair technology and cresent shaped jacket
design Unique jacket design locks each pair into its own
individual chamber. This virtually eliminates movement of the pairs
within the jacket, ensuring that the excellent electrical performance
will not be degraded or compromised during the installation process.
To provide better UTP performance,
Belden developed an innovative manufacturing process in which the
individual insulated conductors are affixed together along their
longitudinal axes. This process ensures several key conditions
$299.99, 10/$2,499.90
Belden
Mediatwist 1874A Cat6 Bulk Cable Reel 1000 FT plenum
Unique Jacket design locks pairs in each chamber, Bonded Pairs provide
full 500 MHz performance after taking the installation abuse from
cable pulls. - Plenum rated.Bonded pair technology and cresent
shaped jacket design Unique jacket design locks each pair
into its own individual chamber. This virtually eliminates movement
of the pairs within the jacket, ensuring that the excellent electrical
performance will not be degraded or compromised during the installation
process.
To provide better UTP performance, Belden developed an innovative
manufacturing process in which the individual insulated conductors
are affixed together along their longitudinal axes. This process
ensures several key conditions:
$598.50, 10/$5,499.90
Berk-Tek
LANmark-1000 Bulk Cat6 Cable1000 FT non-plenum-The LANmark-2000
cable series is comprised of TIA/EIA Category 6, Draft 10a compliant
cables that are specified and tested to 500 MHz. LANmark-2000 is
a true multimedia cable and is specifically designed to handle voice,
video and data simultaneously. The useable bandwidth allows for
the convergence of analog video, voice and data simultaneously.
This convergence of technologies simplifies even the most dynamic
network.
$300.99
Berk-Tek
LANmark-1000 Cat6 Bulk Cable1000 FT plenum-The LANmark-1000
communications cables are designed to support high-end communications
network applications. They are ideal for existing applications such
as Fast-Ethernet and for future applications such as Gigabit Ethernet.
LANmark-1000 cables will support full and half duplex operations,
Applications
: Berk-Tek's LANmark-1000 UTP cable is intended for future
and high-speed data and multimedia applications including:
IEEE
802.3 1000Base-T, 1000Base-TX
100Base-VG
ATM,
155Mbps
ANSI
X3.263 100Mbps/sec
$533.99
Coleman
23 AWG /4 Pair Category 6 Data Cable 1000 ft - Riser
Robust 500MHz Cat6 cable in a Reel-in-a-box packaging for easy dispensing.23
AWG /4 Pair Riser CATEGORY 6 DATA CABLE
COLEMAN CABLE CATEGORY 6 23 AWG TYPE CMR/MPR
FT-4 C(ETL)US LISTED 3034181 ETL VERIFIED TO TIA/EIA-568-B.2-1 CATEGORY
6
Reel
in a box packaging
Conductor:
243AWG Solid Bare Copper
Dielectric:
Solid FRPE
Assembly:
Each pair has different lay length for cross-talk prevention
and ripcord added.
Jacket:
PVC
UL Listed
Type CMR
(ETL)
listed CMG FT4
ETL Verified
to TIA/EIA 568B.2-1
Meets or exceeds
TIA/EIA 568B-B.2-1
$205.50, 10/$1,955.00
Coleman
23 AWG /4 Pair Plenum Category 6 Data Cable
Robust 500MHz Cat6 cable in a Reel-in-a-box packaging for easy dispensing.
- Plenum Rated-23 AWG /4 Pair Plenum CATEGORY 6 DATA CABLE
CAT 6 COLEMAN CABLE 977964 CAT 6 23 AWG 4P (UL) E118964-G TYPE CMP
OR C(UL) FT6 (UL) VERIFIED TO TIA/EIA-568-B.2-1 CAT 6 TESTED TO
600 MHZ CAT 6
Reel
in a box packaging
Conductor:
23AWG Solid Bare Copper
Dielectric:
Solid FEP
Assembly:
Each pair has different lay length for cross-talk prevention
and ripcord added.
Jacket:
PVC
UL Listed
Type CMR
(ETL)
listed CMG FT4
ETL Verified
to TIA/EIA 568B.2-1
Meets or exceeds
TIA/EIA 568B-B.2-1
$468.22, 10/$4,490.00
Commscope
SYSTIMAX GigaSpeed Cat6 1071 Bulk Cable 1000 FT Non-plenum
1071 GigaSPEED cable offers an enhanced traditional four-pair design
that improves signal integrity and strength while reducing cable
emissions. GigaSPEED cable supports 1.2 Gbps ATM for simultaneous
voice, data and video as well as the full 77 channels of analog
broadband video. This cable supports 550 MHz broadband video. 20
year warranty if installed by a certified VAR.
Commscope
SYSTIMAX GigaSpeed Cat6 1071 Bulk Cable 1000 FT Non-plenum
$282.99
Commscope
SYSTIMAX Cat6E GigaSpeed 1081 Bulk Cable 1000 FT Non-Plenum-1081
GigaSPEED cable offers a fluted design construction as an alternative
to the traditional four-pair design. GigaSpeed cable supports Gigabit
Ethernet and 1.2Gbps ATM applications
$359.99
Commscope
SYSTIMAX GigaSpeed 2081 Bulk Cat6E Cable 1000 FT plenum
2081
GigaSPEED cable offers a fluted design construction as an alternative
to the traditional four-pair design. GigaSPEED cable supports Gigabit
Ethernet and 1.2 Gbps ATM applications.
Exceeds Category 6 draft, with
10 dB NEXT and PSNEXT margin.
Designed for Gigabit Ethernet
performance
Maximizes application throughput
Provides additional bandwidth
for future applications
center member
fluted design
$863.99
Commscope
SYSTIMAX GigaSpeed 2071 Bulk Cat6 Cable 1000 FT plenum-2071
GigaSpeed cable offers an enhanced traditional four-pair design
that improves signal integrity and strength while reducing cable
emissions.GigaSpeed cable supports1.2 Gbps ATM for simultaneously
voice, data and video as well as the full 77 channels analog broadband
video. This cable is capable of supporting 550 MHz broadband video.
$674.50
Superior
Essex Nextgain Bulk Cat6 plus Cable 1000 FT [54-246] CMR non-plenum-Combining
Value and Performance Features
Guaranteed NEXT of 6 dB greater
than current proposed Category 6 requirements.
Guaranteed ACR of 30 dB at
100 MHz and 11 dB at 250 MHz
Exceptional PS NEXT, PS ELFEXT,
ACR and PS ACR performance over and above proposed Category
6 requirements.
QuickCOunt
marking system
Applications
100 Mbps 100 Base-T Fast Ethernet
(IEEE 802.3)
155 Mbps ATM, 622 Mbps ATM
1000 Mbps 1000 Base-T Gigabit
Ethernet
$289.99
Superior
Essex Nextgain Cat6 plus Bulk Cable 1000 [54-246] CMP Plenum-Combining
Value and Performance Features
Guaranteed NEXT of 6 dB greater
than current proposed Category 6 requirements.
Guaranteed ACR of 30 dB at
100 MHz and 11 dB at 250 MHz
Exceptional PS NEXT, PS ELFEXT,
ACR and PS ACR performance over and above proposed Category
6 requirements.
QuickCOunt
marking system
Applications
100 Mbps 100 Base-T Fast Ethernet
(IEEE 802.3)
155 Mbps ATM, 622 Mbps ATM
1000 Mbps 1000
Base-T Gigabit Ethernet
Flame Rating Plenum,
CMP
CAT6
Bulk Cable- CAT 6 Plenum and CAT 6 PVC Cable Specifications Below
THE
BELOW PRICES ARE TYPICAL SUGGESTED PRICES- DUE TO THE PRICE OF
OIL&
COPPER
THE PRICES CAN FLUCTUATE DAILY-PLEASE CALL (866) 342-3721 FOR
UP TO DATE PRICING- WE
HAVE MOST CAT 6 PATCH CORDS IN STOCK & CAN SHIP
SAME DAY!
1000
Foot Rolls of CAT 6 PVC as Low as $ 125.00/1000 Foot Rolls- Call
For Details- Minimum's Required! (866) 650-3282
We
carry CAT6 PVC and CAT 6 Plenum cable from Belden, Berktek, Commscope,
Essex, General, AMP, Mohawk, Systimax and more.Please call us
today at (866) 650-DATA
Category
6 (CAT 6) technology is rapidly growing in the telecommunications
industrys commercial market. CAT 6 has been under development
since late 1997. Originally, the wiring was intended to go from
the 100 MHz capability of CAT 5 to 200 MHz, but later that was
revised to 250 MHz. CAT 6 provides for other metrics as well,
variables that become important at high bandwidth rates. These
include crosstalk, or interference between wire pairs, and skew,
the difference in timing of signals on the wires. CAT 6
is the latest type of four pair twisted copper cable designed
for high speed data transmission. CAT 5 was initially touted as
the last cable you'll ever need, but then came Gigabit Ethernet,
which pushed the technology to its limits and used all four pairs
of wires in the cable. So, manufacturers started making, "enhanced",
versions of the cable (hence the "E”). Bandwidth precedes
data rates just as highways come before traffic. Doubling the
bandwidth is like adding twice the number of lanes on a highway.
The trends of the past and the predictions for the future indicate
that data rates have been doubling every 18 months. Current applications
running at 1 Gb/s are really pushing the limits of Category 5E
cabling. As streaming media applications such as video and multi-media
become increasingly commonplace, the demands for faster data rates
will increase and spawn new applications that will benefit from
the higher bandwidth offered by Category 6. This is exactly what
happened in the early ’90s when the higher bandwidth of
Category 5 cabling compared to Category 3 caused
So,
when someone refers to 568A, are they talking about the standard,
or the wiring scheme? The answer, is that it depends on the context.
If they were to say "The entire office fully complies with 568A",
obviously, they would be talking about the standard. If they were
to say "The jacks and patch panels are all 568A", then they would
be referring to the wiring scheme.
The 568 committee, with good intentions, decided to allow both wiring
methods (568A & 568B) to exist within th
e
568A Standard. The reason was that at the time, a great deal of
cabling plants had been installed to the B standard (formerly known
as WECO or AT&T 258A). Even though they allowed both wiring
methods, they stated in their standard that 568A wiring would be
the preferred method for all new installations. Time, and popular
Category
6 (CAT 6) technology is rapidly growing in the telecommunications
industry’s commercial market. CAT 6 has been under development
since late 1997. Originally, the wiring was intended to go from
the 100 MHz capability of CAT 5 to 200 MHz, but later that was revised
to 250 MHz. CAT 6 provides for other metrics as well, variables
that become important at high bandwidth rates. These include crosstalk,
or interference between wire pairs, and skew, the difference in
timing of signals on the wires.
American
Data Supply Will Custom Cut Your OSP CAT 5e or CAT 6 Cable and Connectorize
Your Outside Plant Cable- and SHIP IT THE SAME DAY! ( for an additional
cost)
Why Go CAT 6 Cable? Click Here
Most
Orders Received Before 1PM PST Ship The Same Day-CALL (866)
650-3282
American
Data Supply carries thousands of types of cables from the below
manufacturers for CAT 5e cable, CAT 5e Plenum, CAT 6 plenum, CAT
6 cable and Outdoor Rated CAT 5e Cable
OUTDOOR
Rated CAT 5e
CABLE
& Patch Cords CAT
5e Outdoor Cable: Part # ADS 763108 CAT 5e Outdoor Cable-1000' Outdoor
Rated Category 5e Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil
Resistant Jacket Suitable for Burial - Unshielded with Unbonded
Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded
Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper wire,
enclosed in an outdoor rated, moisture and chemical resistant black
polyethylene jacket. Flooding compound surrounds the twisted pairs,
providing additional moisture protection. This cable is engineered
to meet or exceed ANSI/TIA/EIA 568-B.2 performance criteria for
10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried.
ADS
763108 CAT 5e Outdoor Cable-1000' Outdoor Rated Category
5e Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil
Resistant Jacket Suitable for Burial - Unshielded with Unbonded
Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded
Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper wire,
enclosed in an outdoor rated, moisture and chemical resistant black
polyethylene jacket. Flooding compound surrounds the twisted pairs,
providing additional moisture protection. This cable is engineered
to meet or exceed ANSI/TIA/EIA 568-B.2 performance criteria for
10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried.
ADS
765108 CAT 6 Outdoor Cable-1000' Outdoor Rated CAT 6- Category
6-Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil Resistant
Jacket Suitable for Burial - Unshielded with Unbonded Pairs - Black
Coat, PC Connection's Enhanced Category 5e Flooded Outdoor Ethernet
cable is made from 4-pair, 24AWG solid copper wire, enclosed in
an outdoor rated, moisture and chemical resistant black polyethylene
jacket. Flooding compound surrounds the twisted pairs, providing
additional moisture protection. This cable is engineered to meet
or exceed ANSI/TIA/EIA 568-B.2 performance criteria for 10/100/1000BaseT
Ethernet applications-Extreme outdoor gel
filled, UV rated, plenum, Cat 6e cable. Perfect for extreme weather
conditions. Can be ran exposed or buried. THIS IS CATEGORY 6 -CAT
6 Outdoor cable.
Our
ADS 763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category
5e Heavy Duty Industrial Grade Ethernet Cable is not the same as
you can buy at 'retails stores that is rated as "indoor-outdoor'-
this is the real mccoy and can be direct buried into the ground.
Order
Part Number:
ADS
763108 CAT 5e Outoor Cable (Custom Lengths Available!-
ADS will cut, and terminate your CAT 5e Outdoor Rated Cable- SAME
DAY SHIPPINg available for additional cost.
ADS
763208 Aluminum Shielded Cable (Call For Minimum Order)
-Aluminuml Shielded Cable (Call For Minimum rder)-1000FT OSP Broadband
Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP cables are designed
to provide extension of the LAN beyond the premises. AluminumShielded
for protection against EMI/RFI. A variety of constructions are available
to suit multiple environmental needs.
ADS
763308 Steel Shielded Cable (Call For Minimum Order)-1000FT
OSP Broadband Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP
cables are designed to provide extension of the LAN beyond the premises.
Steel S
UltraPipe
Category 6e+ cables exceed all proposed Category 6 specifications
and provides superior bandwidth performance up to 550Mhz to support
broadband video and high-speed full-duplex transmission protocols.
It defines a new level of performance with a 300% improvement in
PowerSum Crosstalk and a 60% improvement in return loss over Category
6. UltraPipe's patented design includes the revolutionary Isolator
pair separator, which resolves NEXT and ELFEXT issues required for
accurate transmission using all four pairs.
6ECMP 4 pair non 3x1
6ECMR
4 pair non-plenum
6EJCM
4 pair patch cord
UltraMedia
Cable
Engineered
specifically for high-speed, full-duplex, parallel transmission
protocols that dominate new technologies, UltraMedia's patented
design, which includes the revolutionary Isolator pair separator,
resolves ELFEXT and balance issues required for accurate transmission
using all four pairs. Specified to 400Mhz, UltraMedia provides the
performance margin against Category 6 requirements necessary for
bandwidth intensive applications such as 3D imaging and Gigabit
Ethernet.
7504
4 pair plenum
75N4
4 pair non-plenum
6NF4 4
pair outdoor
Media
6
The
Commscope Media 6 meets all Category 6 specification to support
broadband video and high speed, full-duplex transmission protocols
that new technologies demand. Features include a flexible jacket,
thousand to zero footage markers, vibrant colored pairs with a co-extruded
color stripe for easy identification, and a smaller OD than typical
Category 6 products
4 pair plenum
Residential
Cabling Products
When it comes to residential cabling, look to CommScope to provide
the solution. Our UltraHome® cables meet the needs of voice,
data, and video applications in one easy-to-install product. The
UltraHome family consists of coaxial cable, Category 5e unshielded
twisted pair, and multimode fiber in single, Siamese, a
d
Cable (Call For Minimum Order)
Call
Us For a Custom Quote Today For All Your Cable Needs (866) 650-DATA
We
Stock CAT 6 Plenum Cable- 550 MHZ Everyday for $ 399.00
All
our CAT 6 PVC cable and CAT 6 Plenum Cables are UL Listed and ETL
verified. If your business depends on networking
count on us for all of your structured wiring Cat6 and Cat5e bulk
cable needs. The Cat6 and Cat5e UTP cables we carry allow
voice-data convergence and support for Gigabit Ethernet. Choose
from industry leading copper solutions from Avaya SYSTIMAX GigaSPEED,
Avaya SYSTIMAX PowerSUM, Belden, Berk-Tek LANmark, Commscope and
Superior Essex. Available in both plenum and non-plenum Standards
supported: 10/100/1000BaseT, 155/622 ATM, 568A/B. Wire
and cable specifications available.
CAT6
Cable
K6-1KSTP-BL
CAT6 550MHz
Cable, 24AWG, STP, 4 Pairs, 1000', Blue
$ 169.00/1000
Feet -ALL COLORS
Applications SUPPORTS
CURRENT CATEGORY FIVE APPLICATIONS SUCH AS 100 BASE TX, 100 BASE
VG ANYLAN, AND 155 ATM. IDEAL FOR USE IN HIGH BANDWIDTH EXISTING
OR FUTURE APPLICATIONS SUCH AS 622 ATM AND GIGABIT ETHERNET.
1000 UTP cable is intended for current
future and high-speed data and multimedia applications including:
IEEE 802.3 1000Base-T, 1000Base-TX
100Base-VG
ATM, 155Mbps
ANSI X3.263 100Mbps/sec
CAT
6 PLENUM CABLE $399.00/1000 Feet- Call
For latest Pricing and Special Discounts!
American
Tech Supply now has one of the largest supplies and selections of
CAT 6 Cable-CAT 6 patch cords and CAT 6 patch cables- Due to rapidly
fluctuating market prices on commodities such as oil- copper- etc
that make up CAT 5e Cable and CAT 6 cable - Please call (866) 342-3721
For Latest Pricing
CAT
6 PVC CABLE $169.00/1000 Feet -
Call For latest Pricing and Special Discounts!
American
Tech Supply also offer tremendous DISCOUNTS and will MEET or BEAT
any USA based pricing for BULK CAT 5e and CAT 6 Cables- Please call
us at (866) 342-3721 for pallet pricing with cable prices as low
as $ 125/1000 feet.
CAT6
Cable
K6-1KSTP-BL
CAT6 550MHz
Cable, 24AWG, STP, 4 Pairs, 1000', Blue
$ 169.00/1000
Feet -ALL COLORS
Bulk
CAT 6 Cable- Wholesale Only!-
Please only contractors and large OEM Customers-Projects Only!
Belden
Mediatwist 1872A Bulk Cat6 Cable Reel 1000 FT non-plenum
Unique Jacket design locks pairs in each chamber, bonded pairs provide
full 550 MHz performance after taking the installation abuse from
cable pulls.Bonded pair technology and cresent shaped jacket
design Unique jacket design locks each pair into its own
individual chamber. This virtually eliminates movement of the pairs
within the jacket, ensuring that the excellent electrical performance
will not be degraded or compromised during the installation process.
To provide better UTP performance, Belden developed an innovative
manufacturing process in which the individual insulated conductors
are affixed together along their longitudinal axes. This process
ensures several key conditions
$299.99, 10/$2,499.90
Belden
Mediatwist 1874A Cat6 Bulk Cable Reel 1000 FT plenum
Unique Jacket design locks pairs in each chamber, Bonded Pairs provide
full 500 MHz performance after taking the installation abuse from
cable pulls. - Plenum rated.Bonded pair technology and cresent
shaped jacket design Unique jacket design locks each pair
into its own individual chamber. This virtually eliminates movement
of the pairs within the jacket, ensuring that the excellent electrical
performance will not be degraded or compromised during the installation
process.
To provide better UTP performance, Belden developed an innovative
manufacturing process in which the individual insulated conductors
are affixed together along their longitudinal axes. This process
ensures several key conditions:
$598.50, 10/$5,499.90
Berk-Tek
LANmark-1000 Bulk Cat6 Cable1000 FT non-plenum-The LANmark-2000
cable series is comprised of TIA/EIA Category 6, Draft 10a compliant
cables that are specified and tested to 500 MHz. LANmark-2000 is
a true multimedia cable and is specifically designed to handle voice,
video and data simultaneously. The useable bandwidth allows for
the convergence of analog video, voice and data simultaneously.
This convergence of technologies simplifies even the most dynamic
network.
$300.99
Berk-Tek
LANmark-1000 Cat6 Bulk Cable1000 FT plenum-The
LANmark-1000 communications cables are designed to support high-end
communications network applications. They are ideal for existing
applications such as Fast-Ethernet and for future applications such
as Gigabit Ethernet. LANmark-1000 cables will support full and half
duplex operations,
Applications : Berk-Tek's
LANmark-1000 UTP cable is intended for future and high-speed data
and multimedia applications including:
IEEE 802.3 1000Base-T,
1000Base-TX
100Base-VG
ATM, 155Mbps
ANSI X3.263 100Mbps/sec
$533.99
Coleman
23 AWG /4 Pair Category 6 Data Cable 1000 ft - Riser
Robust 500MHz Cat6 cable in a Reel-in-a-box packaging for easy dispensing.23
AWG /4 Pair Riser CATEGORY 6 DATA CABLE
COLEMAN CABLE CATEGORY 6 23 AWG TYPE CMR/MPR
FT-4 C(ETL)US LISTED 3034181 ETL VERIFIED TO TIA/EIA-568-B.2-1 CATEGORY
6
Reel in a box packaging
Conductor: 243AWG Solid Bare Copper
Dielectric: Solid FRPE
Assembly: Each pair has different lay
length for cross-talk prevention and ripcord added.
Jacket: PVC
UL Listed Type CMR
(ETL) listed CMG FT4
ETL Verified to TIA/EIA 568B.2-1
Meets or exceeds TIA/EIA 568B-B.2-1
$205.50, 10/$1,955.00
Coleman
23 AWG /4 Pair Plenum Category 6 Data Cable
Robust 500MHz Cat6 cable in a Reel-in-a-box packaging for easy dispensing.
- Plenum Rated-23 AWG /4 Pair Plenum CATEGORY 6 DATA CABLE
CAT 6 COLEMAN CABLE 977964 CAT 6 23 AWG 4P (UL) E118964-G TYPE CMP
OR C(UL) FT6 (UL) VERIFIED TO TIA/EIA-568-B.2-1 CAT 6 TESTED TO
600 MHZ CAT 6
Reel in a box packaging
Conductor: 23AWG Solid Bare Copper
Dielectric: Solid FEP
Assembly: Each pair has different lay
length for cross-talk prevention and ripcord added.
Jacket: PVC
UL Listed Type CMR
(ETL) listed CMG FT4
ETL Verified to TIA/EIA 568B.2-1
Meets or exceeds TIA/EIA 568B-B.2-1
$468.22, 10/$4,490.00
Commscope
SYSTIMAX GigaSpeed Cat6 1071 Bulk Cable 1000 FT Non-plenum
1071 GigaSPEED
cable offers an enhanced traditional four-pair design that improves
signal integrity and strength while reducing cable emissions.
GigaSPEED cable supports 1.2 Gbps ATM for simultaneous voice,
data and video as well as the full 77 channels of analog broadband
video. This cable supports 550 MHz broadband video. 20 year warranty
if installed by a certified VAR.
Commscope SYSTIMAX GigaSpeed Cat6 1071
Bulk Cable 1000 FT Non-plenum
$282.99
Commscope
SYSTIMAX Cat6E GigaSpeed 1081 Bulk Cable 1000 FT Non-Plenum-1081
GigaSPEED cable offers a fluted design construction as an alternative
to the traditional four-pair design. GigaSpeed cable supports
Gigabit Ethernet and 1.2Gbps ATM applications
$359.99
Commscope
SYSTIMAX GigaSpeed 2081 Bulk Cat6E Cable 1000 FT plenum
2081 GigaSPEED cable offers a fluted design construction
as an alternative to the traditional four-pair design. GigaSPEED
cable supports Gigabit Ethernet and 1.2 Gbps ATM applications.
Exceeds Category 6 draft, with 10 dB
NEXT and PSNEXT margin.
Designed for Gigabit Ethernet performance
Maximizes application throughput
Provides additional bandwidth for future
applications
center member fluted design
$863.99
Commscope
SYSTIMAX GigaSpeed 2071 Bulk Cat6 Cable 1000 FT plenum-2071
GigaSpeed cable offers an enhanced traditional four-pair design
that improves signal integrity and strength while reducing cable
emissions.GigaSpeed cable supports1.2 Gbps ATM for simultaneously
voice, data and video as well as the full 77 channels analog broadband
video. This cable is capable of supporting 550 MHz broadband video.
$674.50
Superior
Essex Nextgain Bulk Cat6 plus Cable 1000 FT [54-246] CMR non-plenum-Combining
Value and Performance Features
Guaranteed NEXT of 6 dB greater than
current proposed Category 6 requirements.
Guaranteed ACR of 30 dB at 100 MHz and
11 dB at 250 MHz
Exceptional PS NEXT, PS ELFEXT, ACR
and PS ACR performance over and above proposed Category 6 requirements.
QuickCOunt marking system
applications
100 Mbps 100 Base-T
Fast Ethernet (IEEE 802.3)
155 Mbps ATM, 622 Mbps
ATM
1000
Mbps 1000 Base-T Gigabit Ethernet
$289.99
Superior
Essex Nextgain Cat6 plus Bulk Cable 1000 [54-246] CMP Plenum-Combining
Value and Performance Features
Guaranteed NEXT of 6 dB greater than
current proposed Category 6 requirements.
Guaranteed ACR of 30 dB at 100 MHz and
11 dB at 250 MHz
Exceptional PS NEXT, PS ELFEXT, ACR
and PS ACR performance over and above proposed Category 6 requirements.
QuickCOunt marking system
Applications
100
Mbps 100 Base-T Fast Ethernet (IEEE 802.3)
155
Mbps ATM, 622 Mbps ATM
1000
Mbps 1000 Base-T Gigabit Ethernet
Flame
Rating Plenum, CMP
$550.75
550
MHZ CAT 6 Cable- Availble in CAT 6 Plenum- more
and CAT 6 PVC -more
CAT6 Bulk
Cable- CAT 6 Plenum and CAT 6 PVC Cable Specifications Below THE
BELOW PRICES ARE TYPICAL SUGGESTED PRICES- DUE TO THE PRICE OF
OIL&
COPPER
THE PRICES CAN FLUCTUATE DAILY-PLEASE CALL (866) 342-3721 FOR
UP TO DATE PRICING- WE
HAVE MOST CAT 6 PATCH CORDS IN STOCK & CAN SHIP
SAME DAY!
1000
Foot Rolls of CAT 6 PVC as Low as $ 125.00/1000 Foot Rolls- Call
For Details- Minimum's Required! (866) 650-3282
Shielded
CAT6 Patch Cords from 1 Foot to 150 Feet!-More
Info
American Tech Supply offers a
wide variety of CAT 6 cable including our wholesale cat 6 cable
including CAT 6 cable UTP twisted pair cables ranging from CAT
6 Plenum cable, CAT 6 Cable from Commscope's 5504M, Belden's Media
Twist and Helix Hi Temps's equivalent's CAT 6 enhanced cables.We
also have a full range of PVC CAT 6 rated cables, CAT 5e, outdoor
rated CAT 5e cable, CAT 6, and CAT 6 Plenum enhanced, Smart Cable,
and indoor/outdoor rated cable to suit your needs from several
manufacturers. CommScope's CAT
6 cable offers unshielded twisted pair cable technology that
is designed to serve the high speed local area network marketplace.
CommScope's Network products are among the highest performing
twisted pair products on the market. We have great pricing on
Category 6 Enhanced -CAT 6 Cable equivalent to the Belden 7852A
Cable for about 40% less.
ATS CARRIES CA6 CABLE BULK CABLE
FROM THE BELOW MANUFACTURERS AND MORE!
We
carry CAT6 PVC and CAT 6 Plenum cable from Belden, Berktek, Commscope,
Essex, General, AMP, Mohawk, Systimax and more.Please call us
today at (866) 650-DATA
Category 6 (CAT 6) technology
is rapidly growing in the telecommunications industry’s
commercial market. CAT 6 has been under development since late
1997. Originally, the wiring was intended to go from the 100 MHz
capability of CAT 5 to 200 MHz, but later that was revised to
250 MHz. CAT 6 provides for other metrics as well, variables that
become important at high bandwidth rates. These include crosstalk,
or interference between wire pairs, and skew, the difference in
timing of signals on the wires. CAT 6 is the latest type
of four pair twisted copper cable designed for high speed data
transmission. CAT 5 was initially touted as the last cable you'll
ever need, but then came Gigabit Ethernet, which pushed the technology
to its limits and used all four pairs of wires in the cable. So,
manufacturers started making, "enhanced", versions of the cable
(hence the "E”). Bandwidth precedes data rates just as highways
come before traffic. Doubling the bandwidth is like adding twice
the number of lanes on a highway. The trends of the past and the
predictions for the future indicate that data rates have been
doubling every 18 months. Current applications running at 1 Gb/s
are really pushing the limits of Category 5E cabling. As streaming
media applications such as video and multi-media become increasingly
commonplace, the demands for faster data rates will increase and
spawn new applications that will benefit from the higher bandwidth
offered by Category 6. This is exactly what happened in the early
’90s when the higher bandwidth of Category 5 cabling compared
to Category 3 caused most local area network (LAN) applications
to choose the better media to allow simpler, cost effective, higher
speed LAN applications, such as 100BASE-TX. It is also important
to note that cabling infrastructure is generally considered a
10 year investment as opposed to one or three years for electronics
or software.
CAT
6 CABLE DESCRIPTION
Part Number
Description-
Specifications
PRICE
CAT6 Cable
K6-1KSTP-BL
CAT6 550MHz Cable, 24AWG,
STP, 4 Pairs, 1000', Blue
Boots offer cable-end
color ID, strain relief and RJ45 plug tab protection
from snagging on cables or connectors when routing in
ceilings and under floors
Critical Network Applications,
Gigabit Ethernet, Fast Ethernet, Broadband Audio and
Video, 155Mbps ATM, 100Mbps TP-PMD/CDDI, NEXT, ELFEXT
and RL Bandwidth Compliant
4-Pair
AWG23-Stranded Copper UTP Cable
100%
Tested Wiring Sequence and Continuity
Terminated
to 8-Contact RJ45 Modular Plugs
50µ˝
Hard-Gold Plating Over 80µ˝ Nickel
Excellent
Attenuation and Crosstalk Characteristics
Impedance
100Ω±15% – DC Resistance 23Ω/1000ft
Mutual
Capacitance 14pF/ft Maximum @ 1kHz
Velocity
of Propagation 68%
PVC
Jacket
Flame
Retardant – Type CM CMH, CMR
Exceeds
Category-6 ANSI/TIA/EIA 568B.2-1 and ISO/IEC 11801 standards
and all proposed Category-6 requirements for high-speed, full
duplex, parallel transmission protocols
UL/UL
and ETL Listed
Category:
Voice and Data
Type: CAT6 Patch Cords - Molded w/ Protector
* TIA/EIA 568A T568B Wired
* STP Shielded Twist Pair
* Foil Shield on individual Pair/Braid shield on 4 pair
* CM Type PVC Jacket
* 26AWG 4pair Stranded Copper Wire
* 50 Micron Gold Plated RJ45 Plug
* Molded Boot on Each End
* Cable Length marked on Boot
CAT 6 Outdoor Rated Cable -Standard-Part
Number: ATSCAT6-OSP CAT6 250MHz,
Cable, 24AWG, UTP, 4 Pairs, Solid, 1000', UV Jacket for Outdoor
Use, (CMX) Cable, Black -
SEE SPECIFICATIONS
Part
Number: ATSCAT6-OSP
Cost $ 299.00 /1000 FT- Volume discounts apply to as low as $
239/1000 fe2t in quantities 25+- please call first for details
as ATS is not responsible for rapid changes due to oil/copper
costs
Outdoor
Rated CAT 6 Patch CordsCat6
cable specifications require stagger terminated wiring, as shown
at the left. Cat 6 Shielded Cable is used in network applications
such as 10Base-T, 100Base-T, 1000Base-T Ethernet technology to 100
meters (328 feet), and have been designed specifically for Gigabit
Ethernet applications (Gigabit over copper). They perform at high-data
transfer rates, and work with ATM and gigabit speed products. These
cables deliver improved performance over standard Cat5e cables.
Cat 6 is completely backward-compatible with current Cat5e equipment.
Our Cat 6 Cables are composed of 4 pairs 24 AWG stranded conductors
with PVC jackets. Conductors are wired to gold plated RJ45 plugs
in accordance with the TIA/EIA 568B standard (Telephone Industry
Association/Electronics Industry Association.) They consist of
a foil shield with drain wire to protect signals from external
noise. Available in nine colors. Boots match cable color. Custom
modular cable assemblies are available.
Part Number
Outdoor
Rated CAT 6 Patch Cords
Color
Price
560-125-050-OSP-C6
50
Foot Outdoor Rated CAT 6Patch Cables
Black
$ 55.10
560-125-100-OSP-C6
100
Foot Outdoor Rated CAT 6 Patch Cables
Black
$ 69.60
560-125-125-OSP-C6
125
Foot Outdoor Rated CAT 6Patch Cables
Black
$ 72.00
560-125-150-OSP-C6
150
Foot Outdoor Rated CAT 6 Patch Cables
Black
$ 104.40
560-125-175-OSP-C6
175Foot
Outdoor Rated CAT 6 Patch Cables
Black
$ 127.60
560-125-200-OSP-C6
200
Foot Outdoor Rated CAT 6 Patch Cables
Black
$ 156.60
560-125-225-OSP-C6
225
Foot Outdoor Rated CAT 6 Patch Cables
Black
$ 171.10
560-125-250-OSP-C6
250Foot
Outdoor Rated CAT 6 Patch Cables
Black
$ 185.60
560-125-275-OSP-C6
275
Foot Outdoor Rated CAT 6 Patch Cables
Black
$ 199.00
Custom
Lengths-Call
Custom Outdoor Patch
Cords- Call
Black
CALL
550 MHZ CAT 6 Cable- Avaialable in CAT 6 Plenum and CAT 6 PVC
Call
Today For Up To Date Pricing (866) 342-3721 or (866) 650-3282
Our outdoor rated CAT
5e cable is available in 500 foot- 1000 foot reels as well as
custom lengths- since the outdoor rated CAT 5e cable is based
on the cost of oil-you need to call us at (866) 342-3721 to get
the latest pricing. Generally the outdoor rated CAT 5e Cable costs
from$ 150-$ 195 per 1000 foot reel. With custom lengths of the
utdor rated CAT 5e cable there is also a cut charge. We can normally
ship the same day of order is placed before
1pm Pacific Time.
CAT 5e- Cat 6- CAT 6 Cable Tutorial
Category
5 Cable (UTP) (Unshielded Twisted Pair)
A
multipair (usually 4 pair) high performance cable that consists
of twisted pair conductors, used mainly for data transmission.
Note: The twisting of the pairs gives the cable a certain
amount of immunity from the infiltration of unwanted interference.
category-5 UTP cabling systems are by far, the most common
(compared to SCTP) in the United States. Basic cat 5 cable
was designed for characteristics of up to 100 MHz. Category
5 cable is typically used for Ethernet networks running at
10 or 100 Mbps.
Category
5 E Cable (enhanced)
Same
as Category 5, except that it is made to somewhat more stringent
standards. The Category 5 E standard is now officially part
of the 568A standard. Category 5 E is recommended for all
new installations, and was designed for transmission speeds
of up to 1 gigabit per second (Gigabit Ethernet).
Category
6
Same
as Category 5 E, except that it is made to a higher standard.
The Category 6 standard is now officially part of the 568A
standard.
Category
7
Same
as Category 6, except that it is made to a higher standard.
The Category 7 standard is still in the works (as of this
writing) and is not yet part of the 568A standard. One major
difference with category 7's construction (as compared with
category 5, 5 E, and 6) is that all 4 pairs are individually
shielded, and an overall shield enwraps all four pairs. Category
7 will use an entirely new connector (other than the familiar
RJ-45).
Category
5 Cable (SCTP) (Screened Twisted Pair)
Same
as above, except that the twisted pairs are given additional
protection from unwanted interference by an overall shield.
There is some controversy concerning which is the better system
(UTP or SCTP). Category 5 SCTP cabling systems require all
components to maintain the shield, and are used almost exclusively
in European countries.
Category
5E, RJ45 jack
(Work Area Outlet)
An
8 conductor, compact, modular, female jack that is used to
terminate category-5E cable at the user (or other) location.
The jack is specifically engineered to maintain the performance
of cat 5E cabling.
Category
5E Patch Panel
A
Category 5E Patch Panel is basically just a series of many
category-5E jacks, condensed onto a single panel. Common panel
configurations are 12, 24, 48, and 96 ports. Patch panels
are typically used where all of the horizontal cable sections
meet, and are used to connect the segments to the Network
Hub.
Category
5E Patch Cable
A
Category 5E Patch Cable consists a length of cat 5E cable
with an RJ-45 male connector, crimped onto each end. The cable
assembly is used to provide connectivity between any two category-5E
female outlets (jacks). The two most common are from hub to
patch panel, and work area outlet (jack) to the computer.
EIA/TIA
568A Standard
This
standard was published in July of 1991. The purpose of EIA/TIA
568A, was to create a multiproduct, multivendor, standard
for connectivity. Prior to the adoption of this standard,
many "proprietary" cabling systems existed. This was very
bad for the consumer. Among other things, the standard set
the minimum requirements for category 5E cable and hardware.
The 568 "standard" is not to be confused with 568A or 568B
wiring schemes, which are themselves, part of the "568A standard".
568A
and 568B Wiring Schemes
When
we refer to a jack or a patch panel's wiring connection, we
refer to either the 568A, or 568B wiring scheme, which dictates
the pin assignments to the pairs of cat 5E cable. It is very
important to note that there is no difference, whatsoever,
between the two wiring schemes, in connectivity or performance
when connected form one modular device to another (jack
to Patch panel, RJ-45 to RJ-45, etc.), so long as they (the
two devices) are wired for the same scheme (A or B).
The only time when one scheme has an advantage over the other,
is when one end of a segment is connected to a modular
device, and the other end to a punch block. In which case,
the 568A has the advantage of having a more natural progression
of pairs at the punch block side. More on 568 A&B later
on.
Four
Pairs
Pair
1: White / Blue
Pair
3: White / Green
Pair
2: White / Orange
Pair
4: White / Brown
Wiremap
This
is the most basic test that can be performed on a category-5E
segment. Wiremap tests for the basic continuity between the
two devices. In 568A or B, all eight pins of each
device should be wired straight through (1 to 1, 2 to 2, 3
to 3, etc.). A wiremap (continuity) test, should also test
for absence ofshorts, grounding,
and external voltage.
Crosstalk
Crosstalk
is the "bleeding" of signals carried by one pair, onto another
pair through the electrical process of induction (wires need
not make contact, signals transferred magnetically). This
is an unwanted effect, that can cause slow transfer, or completely
inhibit the transfer of data signals over the cable segment.
The purpose of the wire twists, in category 5E cable is to
significantly reduce the crosstalk, and it's effects. Two
types are: NEXT (Near End Crosstalk), and FEXT (Far End Crosstalk).
Fiber Optic cable is the only medium that is 100% immune to
the effects of crosstalk.
Ambient
Noise or Electromagnetic Interference (EMI)
Similar
to crosstalk, in that it is an unwanted signal that is induced
into the cable. The difference is that ambient noise (or EMI)
is typically induced from a source that is external to the
cable. This could be an electrical cable or device,
or even an adjacent category 5E cable.
Attenuation
Attenuation
is the loss of signal in a cable segment due to the resistance
of the wire plus other electrical factors that cause additional
resistance (Impedance and Capacitance for example). A longer
cable length, poor connections, bad insulation, a high level
of crosstalk, or ambient noise, will all increase the total
level of attenuation. The 568A standard, specifies the maximum
amount of attenuation that is acceptable in a category-5E
cable segment.
So, when someone refers to 568A, are they talking
about the standard, or the wiring scheme? The answer, is that
it depends on the context. If they were to say "The entire office
fully complies with 568A", obviously, they would be talking about
the standard. If they were to say "The jacks and patch panels
are all 568A", then they would be referring to the wiring scheme.
The 568 committee, with good intentions, decided to allow both
wiring methods (568A & 568B) to exist within the 568A Standard.
The reason was that at the time, a great deal of cabling plants
had been installed to the B standard (formerly known as WECO or
AT&T 258A). Even though they allowed both wiring methods,
they stated in their standard that 568A wiring would be the preferred
method for all new installations. Time, and popular opinion, went
in the other direction. The most popular wiring method today is
568B. Having both A & B methods does nothing but cause errors
and confusion. Originally, patch panels and jacks were manufactured
either A or B. In most cases, they were not labeled as such. Most
suppliers stocked only the B wired products. Luckily, today, almost
all jacks and patch panels show diagrams for both A and B. The
only difference between the two is the interchanging of the 2nd
and 3rd pairs (white/orange and white/green, respectively).
So which method to choose? As we stated earlier; There is no difference,
whatsoever, between the two wiring schemes, in connectivity or
performance when connected form one modular device to another.
The answer, is that it does not matter at all, unless you are
terminating one end onto a punch block, in which case, the A method
has an advantage. The main thing is that you choose one method,
and stick with it. I recommend to all installers that they terminate
one segment on both the jack and patch panel sides, and test for
proper continuity. It has happened to many professionals, where
they terminated the entire installation, and then discovered that
the two ends were wired for different methods. Then they had to
re-terminate all of the cables on one end completely to correct
the situation.
The following charts should be very helpful in illustrating the
difference between the A & B methods. For those who are not
familiar with telephony, tip (T) refers to the positive (+) side,
and ring (R) refers to the negative side of the circuit. The white/blue
pair (the first pair in the cable) consists of two wires that
are twisted together. They are the white/blue (tip) and the blue/white
(ring). The white/blue wire is predominately white with a blue
stripe. The blue/white is the inverse, predominately blue with
a white stripe.
Category 5, 5 E, 6 and 7 Performance Specification
Chart
Parameter
Category
5
and Class D
with additional
requirements TSB95
and FDAM 2
Category
5E
('568-A-5)
Category 6
Class E
(Performance at
250 MHz shown
in parentheses)
Proposed
Category 7
Class F
(Performance at
600 MHz shown
in parentheses)
Specified frequency range
1-100 MHz
1-100 MHz
1-250 MHz
1-600 MHz
Attenuation
24 dB
24 dB
21.7 dB
(36 dB)
20.8 dB
(54.1 dB)
NEXT
27.1 dB
30.1 dB
39.9 dB
(33.1 dB)
62.1 dB
(51 dB)
Power-sum NEXT
N/A*
27.1 dB
37.1 dB
(30.2 dB)
59.1 dB
(48 dB)
ACR
3.1 dB
6.1 dB
18.2 dB
(-2.9 dB)
41.3 dB
(-3.1 dB)**
Power-sum ACR
N/A
3.1 dB
15.4 dB
(-5.8 dB)
38.3 dB
(-6.1 dB)**
ELFEXT
17 dB
(new requirement)
17.4 dB
23.2 dB
(15.3 dB)
ffs***
Power-sum ELFEXT
14.4 dB
(new requirement)
14.4 dB
20.2 dB
(12.3 dB)
ffs***
Return loss
8 dB*
(new requirement)
10 dB
12 dB
(8 dB)
14.1 dB
(8.7 dB)
Propagation delay
548 nsec
548 nsec
548 nsec
(546 nsec)
504 nsec
(501 nsec)
Delay skew
50 nsec
50 nsec
50 nsec
20 nsec
Note: Requirements for Category 7 are currently
under development.
Category 6 (CAT 6) technology is rapidly growing
in the telecommunications industry’s commercial market.
CAT 6 has been under development since late 1997. Originally,
the wiring was intended to go from the 100 MHz capability of CAT
5 to 200 MHz, but later that was revised to 250 MHz. CAT 6 provides
for other metrics as well, variables that become important at
high bandwidth rates. These include crosstalk, or interference
between wire pairs, and skew, the difference in timing of signals
on the wires.
American
Tech Supply Will Custom Cut Your OSP CAT 5e or CAT 6 Cable and
Connectorize Your Outside Plant Cable- and SHIP IT THE SAME DAY!
( for an additional cost)
Why Go CAT 6 Cable? Click Here
Most
Orders Received Before 1PM PST Ship The Same Day-CALL (866)
650-3282
American Tech Supply
carries thousands of types of cables from the below manufacturers
for CAT 5e cable, CAT 5e Plenum, CAT 6 plenum, CAT 6 cable and
Outdoor Rated CAT 5e Cable
OUTDOOR
Rated CAT 5e
CABLE
& Patch Cords CAT
5e Outdoor Cable: Part # ATS 763108 CAT 5e Outdoor Cable-1000'
Outdoor Rated Category 5e Heavy Duty Industrial Grade Ethernet
Cable - Sunlight/UV/Oil Resistant Jacket Suitable for Burial -
Unshielded with Unbonded Pairs - Black Coat, PC Connection's Enhanced
Category 5e Flooded Outdoor Ethernet cable is made from 4-pair,
24AWG solid copper wire, enclosed in an outdoor rated, moisture
and chemical resistant black polyethylene jacket. Flooding compound
surrounds the twisted pairs, providing additional moisture protection.
This cable is engineered to meet or exceed ANSI/TIA/EIA 568-B.2
performance criteria for 10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried.
ATS
763108 CAT 5e Outdoor Cable-1000' Outdoor Rated
Category 5e Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil
Resistant Jacket Suitable for Burial - Unshielded with Unbonded
Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded
Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper
wire, enclosed in an outdoor rated, moisture and chemical resistant
black polyethylene jacket. Flooding compound surrounds the twisted
pairs, providing additional moisture protection. This cable is
engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance
criteria for 10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 5e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried.
ATS
765108 CAT 6 Outdoor Cable-1000' Outdoor Rated CAT 6-
Category 6-Heavy Duty Industrial Grade Ethernet Cable - Sunlight/UV/Oil
Resistant Jacket Suitable for Burial - Unshielded with Unbonded
Pairs - Black Coat, PC Connection's Enhanced Category 5e Flooded
Outdoor Ethernet cable is made from 4-pair, 24AWG solid copper
wire, enclosed in an outdoor rated, moisture and chemical resistant
black polyethylene jacket. Flooding compound surrounds the twisted
pairs, providing additional moisture protection. This cable is
engineered to meet or exceed ANSI/TIA/EIA 568-B.2 performance
criteria for 10/100/1000BaseT Ethernet applications-Extreme
outdoor gel filled, UV rated, plenum, Cat 6e cable. Perfect for
extreme weather conditions. Can be ran exposed or buried. THIS
IS CATEGORY 6 -CAT 6 Outdoor cable.
Our
ATS 763108 CAT 5e Outoor Cable-1000' Outdoor Rated Category
5e Heavy Duty Industrial Grade Ethernet Cable is not the same
as you can buy at 'retails stores that is rated as "indoor-outdoor'-
this is the real mccoy and can be direct buried into the ground.
Order
Part Number:
ATS
763108 CAT 5e Outoor Cable (Custom Lengths Available!-
ATS will cut, and terminate your CAT 5e Outdoor Rated Cable- SAME
DAY SHIPPINg available for additional cost.
ATS
763208 Aluminum Shielded Cable (Call For Minimum Order)
-Aluminuml Shielded Cable (Call For Minimum rder)-1000FT OSP Broadband
Cat5e Steel Shielded Cable - 4 pair-Category 5e OSP cables are
designed to provide extension of the LAN beyond the premises.
AluminumShielded for protection against EMI/RFI. A variety of
constructions are available to suit multiple environmental needs.
ATS
763308 Steel Shielded Cable (Call For Minimum Order)-1000FT
OSP Broadband Cat5e Steel Shielded Cable - 4 pair-Category 5e
OSP cables are designed to provide extension of the LAN beyond
the premises. Steel Shielded for protection against EMI/RFI. A
variety of constructions are available to suit multiple environmental
needs.The ultimate in OSP rated CAT 5e cable.
SPECIFICATIONS ACR (Minimum)—Typical: 30.5 dB/100 m (328.1
ft.) at 100 MHz Attenuation (Maximum)—22 dB/100 m (328.1
ft.) at 100 MHz Conductor—24 AWG, solid, insulated copper Insulation—HD-polyethylene;
Nominal diameter: Standard: 0.23", (0.58 cm); Armored: 0.34" (0.86
cm) Jacket—UV-resistant, abrasion-resistant polyethylene NEXT (Minimum)—Typical: 51.7 dB/100 m (328.1 ft.) at 100
MHz PS-NEXT (Minimum)—Typical: 44.8 dB/100
m (328.1 ft.) at 100 MHz Return Loss (Minimum)—Typical: 21.2 dB/100
m (328.1 ft.) at 100 Hz Time Delay Skew (Maximum)—25 nanoseconds
Temperature— -94° to +167° F (-70°
to +75° C)
American
Tech Supply also offers wholesale priced CAT 5e Cable via "pallet
purchasing" in 1000 foot reels for less than $40.00
per box. Plenum CAT 5e plenum at pallet pricing is from
$ 70-$85.00 per 1000 foot reel.Please call for details at (866)
650-DATA.
UltraPipe
Category 6e+ cables exceed all proposed Category 6 specifications
and provides superior bandwidth performance up to 550Mhz to
support broadband video and high-speed full-duplex transmission
protocols. It defines a new level of performance with a 300%
improvement in PowerSum Crosstalk and a 60% improvement in return
loss over Category 6. UltraPipe's patented design includes the
revolutionary Isolator pair separator, which resolves NEXT and
ELFEXT issues required for accurate transmission using all four
pairs.
6ECMP
4 pair non 3x1
6ECMR
4 pair non-plenum
6EJCM
4 pair patch cord
UltraMedia
Cable
Engineered
specifically for high-speed, full-duplex, parallel transmission
protocols that dominate new technologies, UltraMedia's patented
design, which includes the revolutionary Isolator pair separator,
resolves ELFEXT and balance issues required for accurate transmission
using all four pairs. Specified to 400Mhz, UltraMedia provides
the performance margin against Category 6 requirements necessary
for bandwidth intensive applications such as 3D imaging and
Gigabit Ethernet.
7504
4 pair plenum
75N4
4 pair non-plenum
6NF4 4 pair
outdoor
Media
6
The Commscope
Media 6 meets all Category 6 specification to support broadband
video and high speed, full-duplex transmission protocols that
new technologies demand. Features include a flexible jacket,
thousand to zero footage markers, vibrant colored pairs with
a co-extruded color stripe for easy identification, and a smaller
OD than typical Category 6 products
4 pair plenum
Residential
Cabling Products
When it comes to residential cabling, look to CommScope to provide
the solution. Our UltraHome® cables meet the needs of voice,
data, and video applications in one easy-to-install product.
The UltraHome family consists of coaxial cable, Category 5e
unshielded twisted pair, and multimode fiber in single, Siamese,
and bundled configurations designed for delivering true multimedia
inside the home.
Recently,
CommScope introduced their expanded Residential Cabling line.
The Residential Cabling catalog contains 20 new coaxial, fiber,
and UTP cables for residential voice, data, and video applications
in single, Siamese, and bundled designs. CommScope's UltraHome®
residential cabling products provide the foundation to support
the capabilities of today's technology as well as those of the
future.
DRAKA- Helix -Hi Temp
Products
Category 6 UTP (SuperCAT1000) plenum (805508),
non-plenum (705508) and patch cables (705708) with 200 MHz bandwidth
that deliver 2.4 GHz performance
Enhanced Category 5e UTP (SuperCAT360) plenum (804508), non-plenum
(704508) and patch cables (704708) tested to 360 MHz for extended
Category 5e performance Category 5e UTP (SuperCAT100E) plenum (803308), non-plenum
(703408) and patch cables (701308) that meet all Category 5e
performance criteria
Category 5e UTP for outdoor applications (All Weather SuperCAT)
for direct buried, duct or aerial applications (763108) when
Cat5e performance is needed to withstand weather or temperature
extremes - aluminum armored (763208) and steel armored (763308)
versions available
Category 5 (SuperCAT100) plenum (803508), non-plenum (703108)
and patch cables (701008) delivering solid 100 MHz Category
5 performance - 25 pair versions are available in plenum (803150)
and non-plenum (703150) constructions
Category 3 UTP - plenum (801308), non-plenum (702308) and patch
cables (700708) available - 25 pair versions are available in
plenum (801350) and non-plenum (702350) constructions - patch
cables available in 2, 3 and 4 pair
Local
Area Network Products - Category 5e+
5504M
4 pair plenum 3x1
5504
4 pair plenum 4x0
55N4R 4
pair non-plenum
5524M 8
pair plenum 3x1
5N54
8 pair non-plenum
5NF4
4 pair outdoor
OUTSIDE RATED CAT 5e CABLE
This all
weather SuperCAT cable is an outdoor rated CAT 5e cable that
can be installed directly in the ground, inside a duct or aerially
lashed to a support member. The cable is fully flooded and has
a tough UV and abrasion resistant black polyethlene jacket.
The cable is designed to withstand temperatures as low as -70degrees
C (Celsius) and as high as 75 degress C. Data transmission rates
are up to 100Ms/second. This cable is the ideal solution for
connecting LAN terminal locations outside the main building
such as portable classrooms without the need to use expensive
optical fiber systems.Optional aluminum or steel shielding systems
provide addtional protection for EMI and damage caused by rodents.
Order
Part Number:
ATS 763108
CAT 5e Outoor Cable (Custom Lengths Available!)
ATS 763208
Aluminum Shielded Cable (Call For Minimum Order)
ATS 763308
Steel Shielded Cable (Call For Minimum Order)
Call Us
For a Custom Quote Today For All Your Cable Needs (866) 650-DATA