ATS carries ICC's and may other quality manufacturer MPO fiber optic cassetes that are manuafactured a high density preterminated fiber optic system designed exclusively for data centers, storage area networks, and local area networks. ICC's Fiber Optic Plug and Play (PnP) cassettes are designed with pre-terminated fiber and multi-fiber Plug-in Connectors (MPO). They allow the quick addition of new devices in a computerized system, without the need for reconfiguration or manual installation of other external devices. Internally, each fiber is routed and connected within the cassette to its appropriate port on the front end of the unit. Using ICC's fiber cassettes allow the end user to save significant amounts of time.
MPO Fiber Optic Cassettes make more than sense for datacenters. They save and make money.Whether the distances between devices are a few feet or hundreds of meters, or whether the data rates are 100 Mb/s, 1 Gb/s or even 10 Gb/s, the MPO optical fiber solution is an excellent choice.
"Data centers and storage area networks are immediate revenue-generating opportunities, and the traditional process of pulling in, terminating and testing cables can delay start up," explains Congdon. "Factory-tested and pre-terminated MPO and MRJ 21 systems get data centers up and running about six times faster than traditional methods with no field termination, tool kits or testing. They also offer reduced onsite labor and better cable management for economical moves, adds and changes.""Space is at a premium, and doubling the number of ports on a switch can significantly reduce cost of ownership," says Hall. "MPO and MRJ 21 systems provide significantly higher port densities than traditional methods while reducing cable bulk in pathways and spaces. Additionally, the high-density connectivity simplifies switch change-out and replacement – a critical advantage for time-sensitive systems."
12 Pre-terminated fibers
MPO fiber optic cassette
Type MPO Cassette
Carton QTY
Case Qty
Price EA
MPO CASSETTE, 6F, MM, SC, SIMP, 62.5µm DMULX-F06-4661
50
500
$228.50 ea
MPO CASSETTE, 12F, MM, LC DUP, 10G DMULX-J12-4631
50
500
$288.00ea
MPO CASSETTE, 12F, MM,LC DUP, 50um DMULX-E12-4631
1
8
$288.00ea
MPO CASSETTE, 12F, MM, LC DUP, 62.5µm DMULX-F12-4631
1
8
$288.00 ea
MPO CASSETTE, 12F, MM, SC DUP, 10G DMULX-J12-4661
1
8
$208.00ea
MPO CASSETTE, 12F, MM,SC DUP, 50um DMULX-E12-4661
1
8
$218.00ea
MPO CASSETTE, 12F, MM, SC DUP, 62.5µM DMULX-F12-4661
1
8
$218 ea
This system allows for maximum density in limited spaces while reducing installation time by 75%. MPO fiber optic cassette modules act as a transition point between backbone cables terminated with 12 fiber MPO connectors.
Our MPO fiber modules allow up to 72 fibers to be terminated in only one rack space, reducing rack space requirements by two thirds over a conventional field terminaed fiber backbone. These modules allow valuable rack space to be maximized for high density systems.
A preterminated MPO cassette system can reduce installation time by 75%. Cable termination is performed in the factory, leaving only the installation of the cables and modules. Factory termination guarantees the best connector quality, insertion loss, and overall performance. All system components are 100% optically tested at the factory making field testing unneccesary.
High Density 12-Fiber MPO Cassette Modules
These modules feature 12 fiber LC, SC, ST, or six 2-fiber MTRJ adapters on the front and a 12 fiber MPO adapter on the rear. Inside the module, a cable harness connects the front and rear adapters. Cassette modules can be mounted in any Opticonx FBC series rack and wall mount patch panels.
Our MPO fiber optic cassetes are a high density preterminated fiber optic system designed exclusively for data centers, storage area networks, and local area networks. This system allows for maximum density in limited spaces while reducing installation time by 75%. MPO fiber optic cassette modules act as a transition point between backbone cables terminated with 12 fiber MPO connectors.
Our MPO fiber modules allow up to 72 fibers to be terminated in only one rack space, reducing rack space requirements by two thirds over a conventional field terminaed fiber backbone. These modules allow valuable rack space to be maximized for high density systems.
A preterminated MPO cassette system can reduce installation time by 75%. Cable termination is performed in the factory, leaving only the installation of the cables and modules. Factory termination guarantees the best connector quality, insertion loss, and overall performance. All system components are 100% optically tested at the factory making field testing unneccesary.
High Density 12-Fiber MPO Cassette Modules
These modules feature 12 fiber LC, SC, ST, or six 2-fiber MTRJ adapters on the front and a 12 fiber MPO adapter on the rear. Inside the module, a cable harness connects the front and rear adapters. Cassette modules can be mounted in any Opticonx FBC series rack and wall mount patch panels.
High Density 24-Fiber MPO Cassette Modules
The 24 fiber modules feature 24 fiber LC (12 duplex LC capacity) or 12 MTRJ adapters on the front and two 12 fiber MPO adapters on the rear. Inside the module, a cable harness connects the front and rear adapters. Cassette modules can be mounted in any MPO cassette series rack and wall mount patch panels.
MPO Cassette Modules and Patch Panels
Cassette modules can be mounted into rack or wall mounted patch panels. The FBC1U panel occupies only one rack space and can house three 24 port cassettes for a total capacity of 72 fibers. Two and four rack space FBC's are available and can accomodate 6 and 12 modules for up to 288 fibers in a 4U space. Ample front and rear cable management for backbone and patch cords is provided. These units can mount in either 19 or 23 inch equipment racks.
Fiber Optic Plug and Play (PnP) cassettes are designed with pre-terminated fiber and multi-fiber Plug-in Connectors (MPO). They allow the quick addition of new devices in a computerized system, without the need for reconfiguration or manual installation of other external devices. Internally, each fiber is routed and connected within the cassette to its appropriate port on the front end of the unit. Using ICC's fiber cassettes allow the end user to save significant amounts of time.
American
Tech Supply stocks thousands of singlemode fiber optic jumpers and singlemode
fiber optic assemblies in several types including ST and SC singlemode patch cables
along with a complete assortment of fiber optic patch cords including LC singlemode,
SC singlemode jumpers, and ST singlemode jumpers and adapters. Our singlemode
jumpers, single mode patch cables and single mode assemblies come are available
in a variety of sizes. To
ensure the products' performance, our manufacturing process utilizes high quality
connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or
higher graded fiber cables. Our extensive range of fiber cable is available in
900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors
such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations. We offer the finest quality fiber optic assemblies from several manufacturers including Emerson, Corning, ADC,Telect and more- American Tech Supply now offers 10 gig fiber optic assemblies and 10 gigabit fiber optic jumpers in both multimode and singlemode. We stock one of the largest arrays of singlemode fiber optic assemblies and multimode fiber optic jumpers in the USA. We can ship most fiber optic jumpers and fiber optic assemblies the same day.
10 Gigabit Fiber Optic Assemblies- 10 Gigabit Fiber OPtic Jumpers-MPO patch cords are 12-strand multi-fiber patch cords. Designed with precision molded MT ferrules, our female MPO assemblies are made with precise housings ensuring perfect fiber alignment during mating with MPO cassettes. Its high density design allows for use in compact applications, saving significant amounts of time and overall cost- More Info
We have instock most on the fiber optic assemblies and fiber optic patch cables listed below. ATS provides the highest level of fiber optic patch cords connectivity for all your fiber interconnect applications. Manufactured and tested to the tightest specifications, Bour patch cords exceed Telcordia GR-326 requirements. Our precision zirconia ferrules and environmentally rugged connectors and cable assemblies ensure lasting, repeatable connections.Our fiber optic patch cables are optically tested and visually inspected to ensure that fiber optic return loss, insertion loss, and end-face geometry requirements are satisfied. Our proprietary fiber optic connector polishing processes and fiber optic cable assembly techniques provide minimal back reflection and ultra low insertion loss. All ATS supplier facilities worldwide are ISO 9000 registered.
American Tech Supply also carries military grade fiber optic assemblies. These military grade fiber optic assemblies use M28876-27 Connectors offer rugged military and industrial multifiber optical
connectors for shipboard, indoor and outdoor requirements. These connectors are
designed to perform in a wide range of environmental conditions.
Plugs and receptacles have several key options to prevent configuration problems in systems using multiple connectors. The M28876 series products are available with cadmium-plated aluminum and stainless steel. For less critical environments, an aluminum with cadmium plate over electroless nickel may be used. Stainless steel may be an excellent solution for applications where contact with salt spray and other corrosive elements is possible. The M28876 series of connectors uses the M29504/14 & /15 terminals.
Part Number-
Description Of Duplex Fiber Optic Patch Cords
Price
ATSVCC2P201M
SC-SC DUPLEX SINGLEMODE FIBER OPTIC PATCH CABLE, 1 METER-Ask For "Internet Special" - 25 pcs or more @ $ 12.99 each)
American Tech Supply can normally ship all our fiber optic jumpers and fiber optic assmblies below the SAME DAY- provided we get your order before 1pm Pacific Time. We GUARANTEE THE LOWEST PRICES ON ALL OUR FIBER OPTIC PATCH CABLES incuding our singlemode jumpers, multimode jumpers, LC jumpers, ST jumpers, SC jumper, MTRJ jumpers, custom fiber optic assemblies-and fiber optic adapters.
ATS also offer EXTREME DISCOUNTS for all fiber optic assembly orders over 50 pcs. Some discounts for single mode jumpers aand multimode jumpers can befrom 50% to 75% on orders for 50pcs and more.We offer even more discounts for ORDERS OF 100 PCS AND MORE-AT ONE TIME. Call us for additional savings. American
Tech Supply also can provide you with most custom assemblies with 24 hour turnaround.
Call us for quantity discount pricing. American Tech Supply will meet or beat
any written quote from any supplier in the United States! We are American Operated!!
CALL
(866)
342-3721
Please
see our Indoor Outdoor FIBER OPTIC Jumper-Patch Cords Pricing Below
All of our fiber optic assemblies below can be shipped the same day- if the order is placed before 1pm Pacific Time. Custom
fiber optic cable assemblies take 1-3 days to ship in order to meet specific requirements
and specifications.WE WILL
MEET OR BEAT ANY US BASED QUOTE ON FIBER OPTIC CABLE ASSEMBLIES WITHOUT SACRIFICING
QUALITY!!
FIBER
OPTIC Enclosures-Click Here
We specialize in building custom fiber optic cable assemblies to meet specific requirements and specifications. You can choose from assorted fiber optic cables and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performance. As with all of our fiber optic cable assemblies, all multifiber fiber optic cable assemblies are individually inspected and tested for optical performance. In addition, we can provide CAD drawings to help you with the installation. To ensure the products' performance, our manufacturing process utilizes high quality fiber optic connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber optic cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.
West
Coast Sales (866) 342-3721 East
Coast Sales (866) 650-3282
American Tech Supply stocks thousands of singlemode fiber optic jumpers and singlemode fiber optic assemblies in several types including ST and SC singlemode patch cables along with a complete assortment of fiber optic patch cords including LC singlemode, SC singlemode jumpers, and ST singlemode jumpers and adapters. Our singlemode jumpers, single mode patch cables and single mode assemblies come are available in a variety of sizes. To
ensure the products' performance, our manufacturing process utilizes high quality
connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or
higher graded fiber cables. Our extensive range of fiber cable is available in
900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors
such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.
American
Tech Supply also can provide you with most custom assemblies with 24 hour turnaround.
Call us for quantity discount pricing. American Tech Supply will meet or beat
any written quote from any supplier in the United States! We are American Operated!!
Call Us For Military Spec Fiber Assemblies and Connestors-MIL-C-28876 Connector Systems
M28876-27 Connectors offer rugged military and industrial multifiber optical connectors for shipboard, indoor and outdoor requirements. These connectors are designed to perform in a wide range of environmental conditions.
Plugs and receptacles have several key options to prevent configuration problems in systems using multiple connectors. The M28876 series products are available with cadmium-plated aluminum and stainless steel. For less critical environments, an aluminum with cadmium plate over electroless nickel may be used. Stainless steel may be an excellent solution for applications where contact with salt spray and other corrosive elements is possible. The M28876 series of connectors uses the M29504/14 & /15 termini.
Quick-turn multi-fiber assemblies are available in 50/125, 62.5/125 and 9/125 singlemode configurations for ST, SC, LC, MT-RJ and FC connectors. 10 Gbps 50/125 and MTP® trunk solutions are included in our Enterprise line, for these 2 items only.Our cable choices include indoor, outdoor, dual use - indoor/outdoor, armored cable, cable in conduit as well as traditional riser, plenum and low smoke / zero-halogen solutions. For part number structure,
We specialize in building custom cable assemblies to meet specific requirements and specifications. You can choose from assorted cables and connectors from different manufacturers. We can terminate the connector in many different ways, which will save you money without comprising performance. As with all of our fiber optic cable assemblies, all multifiber cable assemblies are individually inspected and tested for optical performance. In addition, we provide CAD drawings to help you with the installation. You can choose from assorted fiber optic cables and fiber optic connectors from different manufacturers. We can terminate the fiber optic connector in many different ways, which will save you money without comprising performanceTo ensure the products' performance, our manufacturing process utilizes high quality fiber optic connectors with ceramic ferrules (Or Pbronze-if requested), and OFNR riser or higher graded fiber cables. Our extensive range of fiber optic cable is available in 900um, 1.6mm and 3mm jacketed fiber wires terminated with state-of-the-art connectors such as ST, SC, FC, MTRJ and LC types to meet your standard or custom configurations.
SEE FIBER OPTIC Jumper Pricing Below
We
carry a complete line of Fiber Optic Jumpers , Patch Panels, Fiber Optics Adapters,
Singlemode & Multimode SC, ST, FC, LC, MTRJ Fiber Optic Jumpers, Fiber Optic
Rack Mount Enclosures and Fiber
Optic Enclosures.
-
Variety of cable and connector types: indoor and outdoor, 1 to 288 strands
- 100% optically inspected
-Insertion loss tested; results shipped with each
order
-CAD drawing available upon request for special configurations
-Cable
assembly engineering and technical support available
Call
Our Offices At (866) 342-3721 For Discounted Pricing and Custom Product Ordering-
We can make fiber optic patch cords for singlemode jumpers & multimode jumpers and assemblies at any length. We normally have a 1-2 day turn around for 'custom' orders
Always Ask For Special Project VOLUME Pricing- Massive Discounts For 50Pcs or more-Up to 75% Less!!
Call Our Knowlegeable Friendly Customer Service Reps At (866) FIBER-21
"Don't Gamble With Quality- Buy American"
To
meet the growing demand for quality fiber optic solutions, American Tech Supply
offers a wide range of reliable and affordable fiber optic products. As we move
towards the future, our fiber manufacturer partners seek to solve problems in
today's crowded telecom room and work area by providing small form factor (SFF)
solutions. Our fiber work area outlet boxes fill the need for a smooth transition
in bringing fiber to the desktop. The addition of fiber optic MT-RJ products in
1999, followed by the incorporation of LC products in 2001, shows our commitment
to providing complete quality fiber solutions for all your needs. Our extensive
fiber optic solutions include fiber optic patch panels, adapters, distribution
enclosures and boxes.ATS also offers fiber optic jumper cables for singlemode
and multimode applications. Every product has been individually tested and certified
to ensure that they exceed the most rigid industry specifications.
Designed
to save both time and money, our fiber optic solutions are versatile and competitively
priced. From the telecom room to the work area, we provides dependable, cost-effective
Fiber Optic Solutions.When challenged to find reliable Fiber Optic Solutions for
your business or customer, turn to ATS, where Quality
Is Always Affordable.
BRIEF
OVER VIEW OF FIBER OPTIC CABLE ADVANTAGES OVER COPPER:
SPEED: Fiber optic networks operate at high speeds - up into the gigabits
BANDWIDTH: large carrying capacity DISTANCE: Signals can be transmitted
further without needing to be "refreshed" or strengthened.
RESISTANCE: Greater resistance to electromagnetic noise such as radios, motors
or other nearby cables. MAINTENANCE: Fiber optic cables costs much less
to maintain.
In
recent years it has become apparent that fiber-optics are steadily replacing copper
wire as an appropriate means of communication signal transmission. They span the
long distances between local phone systems as well as providing the backbone for
many network systems. Other system users include cable television services, university
campuses, office buildings, industrial plants, and electric utility companies.A
fiber-optic system is similar to the copper wire system that fiber-optics is replacing.
The difference is that fiber-optics use light pulses to transmit information down
fiber lines instead of using electronic pulses to transmit information down copper
lines. Looking at the components in a fiber-optic chain will give a better understanding
of how the system works in conjunction with wire based systems.
At
one end of the system is a transmitter. This is the place of origin for information
coming on to fiber-optic lines. The transmitter accepts coded electronic pulse
information coming from copper wire. It then processes and translates that information
into equivalently coded light pulses. A light-emitting diode (LED) or an injection-laser
diode (ILD) can be used for generating the light pulses. Using a lens, the light
pulses are funneled into the fiber-optic medium where they transmit themselves
down the line.Think
of a fiber cable in terms of very long cardboard roll (from the inside roll of
paper towel) that is coated with a mirror. If you shine a flashlight in one
you can see light at the far end - even if bent the roll around a corner.Light
pulses move easily down the fiber-optic line because of a principle known as total
internal reflection. "This principle of total internal reflection states
that when the angle of incidence exceeds a critical value, light cannot get out
of the glass; instead, the light bounces back in. When this principle is applied
to the construction of the fiber-optic strand, it is possible to transmit information
down fiber lines in the form of light pulses. Multimode cable is made of of
glass fibers, with a common diameters in the 50-to-100 micron range for the light
carry component (the most common size is 62.5). POF is a newer plastic-based cable
which promises performance similar to glass cable on very short runs, but at a
lower cost.
Multimode
fiber gives you high bandwidth at high speeds over medium distances. Light waves
are dispersed into numerous paths, or modes, as they travel through the cable's
core typically 850 or 1300nm. Typical multimode fiber core diameters are 50, 62.5,
and 100 micrometers. However, in long cable runs (greater than 3000 feet [914.4
ml), multiple paths of light can cause signal distortion at the receiving end,
resulting in an unclear and incomplete data transmission. The use of fiber-optics
was generally not available until 1970 when Corning Glass Works was able to produce
a fiber with a loss of 20 dB/km. It was recognized that optical fiber would be
feasible for telecommunication transmission only if glass could be developed so
pure that attenuation would be 20dB/km or less. That is, 1% of the light would
remain after traveling 1 km. Today's optical fiber attenuation ranges from 0.5dB/km
to 1000dB/km depending on the optical fiber used. Attenuation limits are based
on intended application.
The
applications of optical fiber communications have increased at a rapid rate, since
the first commercial installation of a fiber-optic system in 1977. Telephone companies
began early on, replacing their old copper wire systems with optical fiber lines.
Today's telephone companies use optical fiber throughout their system as the backbone
architecture and as the long-distance connection between city phone systems. Cable
television companies have also began integrating fiber-optics into their cable
systems. The trunk lines that connect central offices have generally been replaced
with optical fiber. Some providers have begun experimenting with fiber to the
curb using a fiber/coaxial hybrid. Such a hybrid allows for the integration of
fiber and coaxial at a neighborhood location. This location, called a node, would
provide the optical receiver that converts the light impulses back to electronic
signals. The signals could then be fed to individual homes via coaxial cable.
Local Area Networks (LAN) is a collective group of computers, or computer systems,
connected to each other allowing for shared program software or data bases. Colleges,
universities, office buildings, and industrial plants, just to name a few, all
make use of optical fiber within their LAN systems.
Power
companies are an emerging group that have begun to utilize fiber-optics in their
communication systems. Most power utilities already have fiber-optic communication
systems in use for monitoring their power grid systems.
Call
ATS Today at (866) FIBER-21 or (866) 342-3721