TCCOMM,4-Channel ''Low Latency'' Serial Server, JumboSwitch-DR DIN Rail Ethernet Switch-TC3840DR, Ethernet Network Backbone, Telephone Extenders- Fiber optic modems- Gigabit switches- Singlemode to Multimode Converters- Emergency Phones- Oil Refinery Switches, Traffic Control Switches, Train Control Switches- Fiber Optic Telephone Extenders-Fiber Optic Telephone Extenders- Fiber Telephone Extenders
American
Tech Supply carries a complete line of TC Comm fiber optic modems, gigabit switches, singlemode to multimode converters, emergency phones, oil refinery switches, traffic control switches, train control switches, fiber optic telephone extenders ranging
from simple "quick talk" extenders to multi-line (24 channel) PBX line
extenders allowing you to use existing fiber optic cable to run your voice needs
over 2 fiber strands or install fiber optic cable one time and use fiber optics
for security proof voice, data, IP, video services on one media- fiber
4-Channel ''Low Latency'' Serial Server
Featuring support for teleprotection relays, the TC3847-3 Turbo Serial Card transports four channels of RS-232 or RS-422/ RS-485 serial data over existing Layer 2/Layer 3 networks.
Features
- 4 Channels of RS-232 & 4 Channels of RS-422 / RS-485
- Extremely Low Latency (Supports Teleprotection Relays)
- RS-232 Ports Support Hardware Handshaking or Synchronous Mode
- Data Rates up to 115kbps
- VLAN & QoS Support
- Temperature & Power Consumption Monitoring
- Extreme Temp (-40?C to +80?C)Optional
- Meets or Exceeds IEC 61850-3, IEEE 1613 & NEMA TS-2 Standards
- Member of JumboSwitch? Product Family
Applications
Typical applications include extending
serial data across IP networks.
For example, the TC3847-3 is often
used to extend RS-232/RS-422/ RS-
485 signals from one protection relay
to another across Layer 2/Layer
3 Networks.
Specially designed to meet stringent
real time requirements for
protective relay communications
in the power utility industry, this
Turbo Serial interface card can perform
at less than 3msec. latency,
end-to-end, through an Ethernet
network. This extremely low latency
is irrespective of the protocol
used, mirror bit or otherwise, and is
unaffected by the number of nodes
in between. In short, it's the fastest
serial-over-IP solution for teleprotection
currently available in the
industrial marketplace today.
Downloads
View Datasheet in PDF
Specifications
Data Rates
- RS-232Up to 115Kbps
- RS-422/RS-485Up to 115Kbps
- Ethernet10/100Mbps Full Duplex
- Console9.6K
Connection Capacity
- RS-232 or RS-422/RS-4854 Ports
- Ethernet1 Port
Electrical
- RS-232 Interface
- ESD Protection+/-15KV HBM
- ConnectorRJ11F
- RS-422 Interface
- Termination (optional)100 Ohm
- ESD ProtectionRJ11
- ConnectorRJ11
- RS-485 Interface
- Termination (optional)100 Ohm
- ESD Protection+/-15KV HBM
- ConnectorRJ11
- Ethernet Interface
- Termination (optional)IEEE 802.3, 802.3u, 802.1p&Q
- ConnectorRJ45
- Console PortRJ45
Regulatory Approval
- CE, FCC Part 15, CISPR, CLASS A, IEC, 61850-3, IEEE 1613, NEMA TS-2
System
- Bit Error Rate1 in 1010 or Better
Diagnostic Functions
- Local and Remote Loopback for Serial and Ethernet
LEDs
- Unit StatusPWR (A, B), Alarm Vcc, BP, MGM>
- ChannelRx/Tx/Status
- EthernetLink/Act
Power
- Standard12VDC
- Optional24, -48 VDC, 90-260 VAC, 50/60Hz
- Power Consumption< 10W
Operating Temperature
- Hi-Temp-20°C to 70°C
- Extreme Temp-40°C to 80°C
Storage
- Temperature-40°C to 90°C
- Humidity95% non-condensing
Physical (4-Channel Standalone)
- Height(3.15 cm) 1.24"
- Width(17.78 cm) 7.0"
- Depth(22.86 cm) 9.0"
- Weight(0.3 kg) 0.75 lbs