TCCOMM,T1/E1, Data/Voice & Ethernet Fiber Optic Multiplexer-4-24 Ch, Telephone Extenders- Fiber optic modems- Gigabit switches- Singlemode to Multimode Converters- Emergency Phones- Oil Refinery Switches, Traffic Control Switches, Train Control Switches- Fiber Optic Telephone Extenders-Fiber Optic Telephone Extenders- Fiber Telephone Extenders
American
Tech Supply carries a complete line of TC Comm fiber optic modems, gigabit switches, singlemode to multimode converters, emergency phones, oil refinery switches, traffic control switches, train control switches, fiber optic telephone extenders ranging
from simple "quick talk" extenders to multi-line (24 channel) PBX line
extenders allowing you to use existing fiber optic cable to run your voice needs
over 2 fiber strands or install fiber optic cable one time and use fiber optics
for security proof voice, data, IP, video services on one media- fiber
T1/E1, Data/Voice & Ethernet Fiber Optic Multiplexer (4-24 Ch.)
The TC8518 T1/E1, Data/Voice & Ethernet Fiber Optic Multiplexer multiplexes 4/8/16 channels of T1/E1 and 3 Ethernet ports on single mode (1300/1550nm) or multimode (1300nm) fiber.
Features
- Multiplexes Up to 24 T1 or 20 E1 and 3 Ethernet Ports Over Fiber
- Optional Voice (up to 8 channels FXS/FXO or
4 channels 2 Wire/4 Wire Analog) or Data (up to 8 channels RS-232/RS-422/RS-485)
- Optical and Power Redundancy Standard
- Key Features: Statistics Monitoring (T1/E1, Ethernet, Optics), Ethernet Rate Limiting, Remote Firmware Upgrade, Network Time Server (NTS), Temperature Monitoring and Loop Up/Down Codes
- Management (Web, SNMP, Telnet,Console)
- FXS/FXO Ports Support Modems & Faxes
- High Temp (-20?C to +70?C) and Extreme Temp (-40?C to +80?C) Optional
- Multimode or (1300nm) or Singlemode Optics (1300/1550nm)
- 90-260VAC Hot Swappable Power Standard Optional Power: 12VDC, 24VDC, -48VDC,
125VDC
Applications
Typical applications include
connecting T1/E1 signals from Cell
Towers to Central Offices,
multiplexing T1/E1 links between
PBX's, and adding Ethernet, Analog,
Data or Telephone service to existing
T1 or E1 fiber optic links.
Service Providers use the TC8518 as
an efficient, cost effective method to
provide their customers with Ethernet
(100Mbps Total Bandwidth) for data
and T1/E1 for voice. Analog channels
can be used for radio applications.
The one fiber, bi-directional optic
option doubles existing fiber optic
cable capacity.
Downloads
View Datasheet in PDF
Specifications
Data Rates
- T11.544 Mbps
- E12.048 Mbps
- Ethernet100 Mbps Total
- Async RS-232/422/485Up to 115K
- Console9.6K
- Audio300 Hz to 3.4 Khz
Channel Capacity
- T14, 8, 16, 20*, 24*
- E14, 8, 16, 20*
- Ethernet3 Port Switch
- 2-Wire/4-Wire Analog 4
- RS-232/422/4854 or 8
- Telephone (FXS or FXO)4 or 8
Optical
- TransmitterELED/LASER**
- ReceiverPIN Diode
- Wavelength1300nm Multimode, 1300/1550nm Single Mode
- Optical ConnectorsSC/ST
- Loss Budgets **
- LED15dB MM @62.5/125?m
- LASER20dB SM @9/125?m
Electrical
- InterfaceT1, E1 (G.703) IEEE 802.3, T1 (100 Ohm), E1 (120 Ohm)
- ConnectorsRJ48C
- E1 (75 Ohm) ConnectorsBNC***
- 10/100 Ethernet ConnectorsRJ45F
- Telephone/Analog/RS232/422/485RJ11F
- Console PortRJ45F
System
- Bit Error Rate1 in 1010 or Better
Visual Indicators
- System LEDsPWR (A, B), Alarm
- Channel Status (each port)On/Off
- Optical StatusSync, RDI,OPT-A, OPT-B, Use-B, Loc Test, Rmt Test, RCOM
- EthernetLink/Act, Full/Col, 100M
Diagnostic Functions
- Local and Remote Loopback for Optics, T1/E1, and Ethernet
Power
- Standard90-260VAC, 50/60Hz
- Optional12VDC, 24VDC, -48VDC, 125VDC
- Power Consumption <30W
Temperature
- Operating-10°C to 50°C
- High Temp (optn)-20°C to 70°C
- Extreme Temp (optn)-40°C to 80°C
- Storage-40°C to 90°C
- Humidity95% non-condensing
Physical (Standalone Unit)
- Height(4.22 cm) 1.66"
- Width(48.26 cm) 19"
- Depth(30.5 cm) 12"
- Weight(1.36 kg) 3.0 lbs