Abesco Firefoam-Firestop- Abesco FP 200- Abesco Firestop-Firestop Foam-ASTM E 814 Firestop Products
Abesco is the World's Leading Manufacturer of Firestop and Commercial Firestop
Abesco Fire Foam Comes In 24 Ounce and 10 Ounce Cans
|
 |
 |
|
|
 |
Abesco FP200 FR Expanding Foam is a single pack Fire Rated polyurethane expanding foam, and is designed to prevent the spread of fire and smoke from one compartment to another through gaps and voids through fire rated walls or floors.Abesco FP200 Fire Rated Expanding Foam is an expanding, fire-rated polyurethane foam designed to prevent room-to-room fire and smoke spread through gaps or voids in fire-rated walls and floors. FP200 Fire Rated Expanding Foam provides an insulating seal on and between concrete, brick, wood, metal, aluminum and steel.Firestop and Firestopping is an integral part of fire protection engineering in all commercial buildings and are required by law in most states to satisfy mandated laws for commercial building fire protection. Firestop systems protect against the passage of flames, deadly gases and toxic smoke through openings that are created for penetrations, joints and gaps in fire-resistive walls, floors and floor/ceiling assemblies. The integrity of fire-rated assemblies is restored by firestop systems. Building codes require third-party tested systems to be installed whenever fire-rated construction is compromised by such openings.
PLEASE NOTE ONE ABESCO FIBER FOAM 24 OUNCE CAN EXPANDS TO APPROXIMATELY 1 CUBIC FOOT- Temperature and Humidity Affect exact expansion
 Price $ 25.99 per can- FP 200 Comes in 24 oz Can |
Part Number # FP 20424 |
Abesco FP200 Fire Rated Expanding Foam - 10 oz can |
Part Number # FP 20410 Can Price $ 15.42 Per Can |
What's special about ABESCO® FP200? Comes in 24 Oz and 10 Oounce Cans
- Meets the following independent testing standards: ASTM E-814 (UL 1479) – 2 hours fire resistance, BS EN 1366-3, BS476 part 20 – 4 hours fire resistance, AS1530.4
- Creates an insulating seal on and between concrete, brick, wood, metal, aluminum & steel
- Not affected by moist or humid temperatures
- Environmently friendly and 100% CFC-free
- Approved worldwide and recognized by independent authorities and tested in accordance with
- ASTM E-814 (UL 1479)
- BS 476
- AS 1530.4
- BS EN 1366-3
Abesco FP200 Foam is made from expanding, fire-rated polyurethane, designed to prevent room-to-room fire and smoke spread through gaps or voids in fire-rated walls and floors. FP200 Fire Rated Expanding Foam provides an insulating seal on and between many different building materials such as: concrete, brick, wood, metal, aluminum and steel.
FP200 FR Expanding Foam properly fills gaps and voids in through-penetration firestop systems. Under fire conditions, Abesco FP200 FR Expanding foam provides an effective insulating barrier and maintains the integrity of the firewall or floor. Complements the Abesco CT120 Cable Transit system.
- Dries to a light Pink color
- Meets the following independent testing standards: ASTM E-814 (UL 1479) – 2 hours fire resistance, BS EN 1366-3, BS476 part 20 – 4 hours fire resistance, AS1530.4
- Excellent adhesion to most building substrates
- 1 24oz can will cover approximately 1 cubic foot (.995)
- Limited Warranty:
Buyer assumes all risks of use, handling and storage of product not in strict accordance with label directions. Liability for any incidental or consequential damage or loss is specifically excluded at all times. Any implied warranty of merchantability or fitness for particular use is excluded. Seller will not accept liability for more than product replacement. - Note: Container contains "Extremely Flammable" warning. Contents are under pressure. Container may explode if heated. Contents may catch fire.
What happens in a Fire Situation? Under fire conditions Abesco FP200 FR Expanding Foam provides an effective insulating barrier, thereby maintaining the integrity of the wall or floor and preventing the spread of fire from one compartment to another. |
Where to use Abesco FP200 Fire Rated Foam Abesco FP200 FR Expanding Foam is suitable for use in most buildings where a seal is required for through penetrations in fire rated floors and walls (for Installation details please refer to technical data sheet) Typical types of buildings FP200 FR Expanding Foam is commonly used are:
|
American Tech Supply is a national Firestop distributor and firestop supplier for a multitude of firestop products and carries a complete line of Firestop Products and Fire Stop Protection products. Our complete line of firestop fire protection products helps stop the spread of fire, smoke and toxic fumes. Our firestop fire protection produsts are easy to install and are approved for a wide variety of firestop applications by Underwriter’s Laboratories. Total passive firestop and 'fire' protection cannot be achieved with the use of a singular product. It is the use of many products designed for specific firestop applications that comprise a complete passive firestop fire protection systems. When installed properly, these firestop products work in concert with one another to create effective barriers against the passage of flames, smoke, and superheated gases. Used is conjunction with other firestop fire protection methods, properly installed passive fire protection will save lives, protect property, and minimize business losses.
Firestop and Firestopping is an integral part of fire protection engineering in all commercial buildings and are required by law in most states to satisfy mandated laws for commercial building fire protection. Firestop systems protect against the passage of flames, deadly gases and toxic smoke through openings that are created for penetrations, joints and gaps in fire-resistive walls, floors and floor/ceiling assemblies. The integrity of fire-rated assemblies is restored by firestop systems. Building codes require third-party tested systems to be installed whenever fire-rated construction is compromised by such openings.
 |
Telecomm cables found in a Hospital, the day before a Joint Commission Inspection. Cables were sleeved without having to be removed with our Split Sleeve & Bulkhead System. | |
|
|
|
|
|
|
|
What is meant by "active" and "passive" fire protection?
Active fire suppression includes mechanical systems such as sprinklers, that are designed to extinguish fires after they have started. Passive fire protection functions to contain fires within the areas in which they start, preventing loss of life by preventing the products of combustion (smoke, hot gasses and flames) from spreading throughout a building.
Why is "passive" fire protection necessary?
Fire is a dangerous enough phenomenon that redundancy in fire protection is necessary. Having passive protection in place helps assure building occupants that there will be time to exit before gasses, fire and smoke spread throughout the building. If active systems fail, as they often do, then there is still a passive system in place for life safety.
It is the use of many products designed for specific firestop applications that comprise a complete passive firestop fire protection systems. When installed properly, these firestop products work in concert with one another to create effective barriers against the passage of flames, smoke, and superheated gases. Used is conjunction with other firestop fire protection methods, properly installed passive fire protection will save lives, protect property, and minimize business losses.
Joints
Construction joints must be sealed with joint systems, which will impart a fire resistance at least equal to those of the adjacent constructions so that overall fire resistance is not compromised.
Fire resistive joint systems are used in building construction to seal joints, and must be of the same or greater fire resistance (temperature) rating as the wall or floor containing the opening which they are designed to protect. Perimeter joint systems are most often used to seal a clearance separation between curtain walls and floors. They are designed to accommodate various movements induced
From the leader in fire protection...
Our manufacturer partners have been creating innovative firestop systems for more than 25 years. Our complete line of fire protection products helps stop the spread of fire, smoke and toxic fumes. They’re easy to install and are approved for a wide variety of firestop applications including but not all: Underwriter’s Laboratories, Factory Mutual and Omega Point Laboratories. American Tech Supply as a distributor can provide fully tested systems to firestop all of these scenarios:
- Structural steel
- Emergency circuitry
- Grease/air ducts
- Through penetrations
- Perimeter joints
- Fire resistive joints
ABESCO FIREFOAM RATINGS:
- Manufactured to ISO 9001:2000
- Corrosion resistant suitable for use in aggressive environments
- Certification for a wide range of cables Available in a range of sizes
- Very easy to install and provides total flexibility in cable routing
- Abesco graphite intumescent is unaffected by moisture
- Approved worldwide and recognized by independent authorities and tested in accordance with
- ASTM E-814 (UL 1479)
- BS 476
- AS 1530.4
- BS EN 1366-3
|
|
|||||||
 |
|
What is firestop?
Firestop and Firestopping is an integral part of fire protection engineering. Firestop systems protect against the passage of flames, deadly gases and toxic smoke through openings that are created for penetrations, joints and gaps in fire-resistive walls, floors and floor/ceiling assemblies. The integrity of fire-rated assemblies is restored by firestop systems. Building codes require third-party tested systems to be installed whenever fire-rated construction is compromised by such openings.
Firestop and Firestopping is an integral part of fire protection engineering in all commercial buildings and are required by law in most states to satisfy mandated laws for commercial building fire protection. Firestop systems protect against the passage of flames, deadly gases and toxic smoke through openings that are created for penetrations, joints and gaps in fire-resistive walls, floors and floor/ceiling assemblies. The integrity of fire-rated assemblies is restored by firestop systems. Building codes require third-party tested systems to be installed whenever fire-rated construction is compromised by such openings.
|
Telecomm cables found in a Hospital, the day before a Joint Commission Inspection. Cables were sleeved without having to be removed with our Split Sleeve & Bulkhead System. | |
What is meant by "active" and "passive" fire protection?
Active fire suppression includes mechanical systems such as sprinklers, that are designed to extinguish fires after they have started. Passive fire protection functions to contain fires within the areas in which they start, preventing loss of life by preventing the products of combustion (smoke, hot gasses and flames) from spreading throughout a building.
Why is "passive" fire protection necessary?
Fire is a dangerous enough phenomenon that redundancy in fire protection is necessary. Having passive protection in place helps assure building occupants that there will be time to exit before gasses, fire and smoke spread throughout the building. If active systems fail, as they often do, then there is still a passive system in place for life safety.
It is the use of many products designed for specific firestop applications that comprise a complete passive firestop fire protection systems. When installed properly, these firestop products work in concert with one another to create effective barriers against the passage of flames, smoke, and superheated gases. Used is conjunction with other firestop fire protection methods, properly installed passive fire protection will save lives, protect property, and minimize business losses.
Joints
Construction joints must be sealed with joint systems, which will impart a fire resistance at least equal to those of the adjacent constructions so that overall fire resistance is not compromised.
Additional Information -Applications Click Here
Fire resistive joint systems are used in building construction to seal joints, and must be of the same or greater fire resistance (temperature) rating as the wall or floor containing the opening which they are designed to protect. Perimeter joint systems are most often used to seal a clearance separation between curtain walls and floors. They are designed to accommodate various movements induced
From the leader in fire protection...
Our manufacturer partners have been creating innovative firestop systems for more than 25 years. Our complete line of fire protection products helps stop the spread of fire, smoke and toxic fumes. They’re easy to install and are approved for a wide variety of firestop applications including but not all: Underwriter’s Laboratories, Factory Mutual and Omega Point Laboratories. American Tech Supply as a distributor can provide fully tested systems to firestop all of these scenarios:
- Structural steel
- Emergency circuitry
- Grease/air ducts
- Through penetrations
- Perimeter joints
- Fire resistive joints
Please Visit Our Product Links Below:
CT 120 Cable Transits- Designed for single or multiple cables-easy to install and alter cabling-use in floats & walks-including drywall
Abesco CT120 Cable Transits are designed to prevent the spread of fire from one compartment to another where electrical, data, and communication cables penetrate through separating walls and floors.
Abesco CT120 Cable Transits consist of a square section steel sleeve, which contains the heat reactive intumescent material. The unit has an integral hinged top which provides an easy retro-fit option where cables are pre-installed. Abesco CT Mounting Plates provide a quick and easy method of installing single or multiple CT120 Cable Transits. even in drywall partitions.
WHY USE ABESCO CT120 CABLE TRANSITS ?
- Manufactured to ISO 9001:2000
- Corrosion resistant suitable for use in aggressive environments
- Certification for a wide range of cables Available in a range of sizes
- Very easy to install and provides total flexibility in cable routing
- Abesco graphite intumescent is unaffected by moisture
- Approved worldwide and recognized by independent authorities and tested in accordance with
- ASTM E-814 (UL 1479)
- BS 476
- AS 1530.4
- BS EN 1366-3
WHERE DO I USE ABESCO CT120 CABLE TRANSITS ?
Abesco CT120 Cable Transits are suitable for use in any building where electrical, data, or communication cables penetrate through fire rated compartment floors and walls, including drywall.
Typical types of buildings where Abesco CT120 Cable Transits are commonly used are :
Banking and finance buildings, data processing centers, TV and media studios, apartment buildings, hotels, office buildings, hospitals, airports, retail centers etc.
WHAT HAPPENS IN A FIRE SITUATION ?
When exposed to the heat of a fire, the graphite based intumescent material contained in the Abesco CT120 Cable Transits expands rapidly to close and seal the inside of the sleeve, preventing the spread of fire from one compartment to another.
Additional Firestop Links Below:
Alliance for Fire and Smoke Containment and Control (AFSCC)
The American Institute of Architects (AIA)
American National Standards Institute (ANSI)
American Society for Testing and Materials (ASTM)
Building Officials and Code Administrators International (BOCA)
Canadian Fire Safety Association (CFSA)
Factory Mutual Research Corp (FMRC)
OTHER PRODUCTS
Abesco supply a wide range of Firestop products which provide the specifier, engineer and contractor with cost effective solutions to most passive fire protection problems experienced on todays construction projects.
We will beat any US-Based Company's Price On Firestop - CableTray or Raceway!
Raceway System Solutions- Cable Tray Systems-Cable tray-Cable trays-Cable Tray Systems-Raceway Systems- Flextray-Basket Tray
Snake Tray Cabletray-Raceway Systems 
Snake Loop
Call Us Today Tollfree At (866) 342-3721 or (866) 650-DATA
Or Click On The Chat Button At The Top Of The Page To Talk To One Of Our Representatives
|
|
|
|
|