American
Tech Supply now carries Maxcell's new fabric innerduct which
has" several major advantages " over traditional
innerduct products covered below. Maxcell fabric innerduct is a
popular fabric innerduct product that has successfully offered several
advantages over standard HDPE especially offering up to 80% fill
ratios over standard innerduct. Maxcelll fabric cells are' bound'
together in 2-2"cells, 3-3" cells, 4- 4"-cells.
...............afteranother 3" Duct solution....
Maxcell
will not spiral in conduit
like traditional HDPE
Maxcell
with multi colored pull tape
This Maxcell innerduct lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.American Tech Supply now carries Maxcell's new fabric innerduct which is similar to the Maxcell fabric innerduct but has several major differences to the Maxcell innerduct product which will be covered below. Maxcell is the very popular fabric innerduct product that have successfully offered several advantages over standard HDPE especially offering up to 80% fill ratios over standard innerduct. Maxcell also has several differences over innerduct in the type of composite materials that it is manufactured from as well as the type of cellular structure.
Inflatable Termination Bag for a 3" Conduit
View more sizes and information
0.5 lb
American Tech Supply an innerduct and duct supplier specializes in fast turnaraound for a Complete Line of Innerduct and Raceway Products including standard innerduct, Plenum Innerduct, High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. ATS's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickeness. ATS stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE innerduct/duct is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable.
MaxCell is the only flexible, multi-celled, textile innerduct system designed specifically for the network construction industry.The unique textile construction allows MaxCell to conform to the shape of cables placed within, greatly reducing the wasted space associated with rigid innerduct.
MaxCell Will:
·Reduce the number of conduits required for new network construction
·Minimize need for additional conduit in overlay applications
·Enable incremental cable deployment to match system requirements
MaxCell is a versatile solution
for the complex problems faced by today’s engineers, contractors,
and network providers. Also MaxCell configurations
include one, two, and three cell designs for use in 1.25”
or larger conduits; and most are available in Standard, Plenum,
and Detectable versions.
Over 100 million feet of MaxCell innerduct have been successfully installed around the globe in a variety of applications including:
·Cable TV
·Telecom
·Power/Utilities
·Municipalities
·University, Corporate, and Hospital campuses
·Military and Government installations
-Maxcell is also a woven sleeve manufactured from polyester monofilaments and designed to optimize allocation of cables within conduit structures. The fabric takes on the shape in the conduit allowing it to conform to the available space. Maxcell simplifies the installation process by allowing several cables to be placed at once so each cable to be added one at a time. This feature makes it the perfect tool for installing new networks initially or up-grading existing ones. Maxcell can also be installed into pre-occupied duct with existing cable-thus maximizing cable density.
We also stock plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. It¹s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
(866) FIBER-21 (866) 342-3721 (866) 650-3282
Maxcell versus Traditional Innerduct
Maximizing cable capacity within conduit is one of the most important aspects of successful cable installation - that's exactly what we help you achieve. Conventional HDPE innerduct limits the amount of cable that can be installed. Maxcell® SC conforms to the shape of cable instead of holding a circular profile.
West Coast (866) FIBER-21 Southern CA (760) 471-8200 East Coast (866) 650-3282
...............afteranother 3" Duct solution....
Maxcell® SC improves space utilization up to 85 percent as compared to 60 percent or less with traditional rigid innerduct products. Now, you can increase space utilization in conduit far beyond what traditional rigid innerduct can achieve. Installers can now dramatically simplify the installation process and greatly reduce installation costs.
What is Maxcell?
Maxcell is a single cell, textile-based innerduct engineered to conform to the shape of cable instead of holding a circular profile. Manufactured by Federal-Mogul Systems Protection Group, this flexible construction offers features and benefits unmatched by other innerduct solutions. With Maxcel installers can dramatically simplify the installation process and greatly reduce installation costs.
Key Features:
* Highly flexible
* Protects against moisture absorption
* Chemical and ultraviolet (UV) resistant
* Weighs a fraction of traditional innerduct products
* Conforms to available space during installation
* Maintains a flat profile for shipping and storage
* Packaged on a wooden spool with plastic fiber flanges
* Permanent color-coded identification striped cells
* Pre-installed MULETAPE® printed with sequential footage markers
* Detectable versions are available
* Customized packaging and configurations also available
Key Benefits:
* Maximizes conduit space utilization
* Simplifies the installation process - Place several cables at once or add them one at a time
* Can be used for new installation or existing network upgrades
* Install in preoccupied duct with existing cables or innerduct
* Easy to handle, ship, store and dispose
* Optional detection features allow cable installers to make repairs and utility workers to avoid disturbing ground in the immediate area
* Utilizes warehouse space efficiently
Compatible with Multiple Installation Methods Maxcell can be easily installed by the traditional method of being pulled into the conduit or by using the air blown method using the NEPTCO MULEGUN® (below). The air blown method's ability to reduce installation time and labor makes the technique a growing trend.
Maxcell allows you to place the maximum number of cables in any type of conduit network structure. By taking the shape of the cables placed within, Maxcell allows you to utilize up to 85% of available duct space.
Previously limited to three cables in a four" conduit, Maxcell customers can now place up to nine cables in the same conduit!
Maxcell works with every known type of cable including: Fiber Optic -Telephone
Power-Utility -Premise -Outside Plant -Underground
Maxcell is a woven sleeve manufactured from polyester monofilaments and designed to optimize allocation of cables within conduit structures. The fabric takes on the shape in the conduit allowing it to conform to the available space. Maxcell simplifies the installation process by allowing several cables to be placed at once so each cable to be added one at a time. This feature makes it the perfect tool for installing new networks initially or up-grading existing ones. Maxcell can also be installed into pre-occupied duct with existing cable-thus maximizing cable density.
Pulling tape and color tracers are both key features included in the design of Maxcell. Pulling tape is included in each cell to assist in drawing cables over long lengths with the help of pulling devices commonly used by installation contractors. The colored tracers are included to easily identify each cell
Maxcell saves you valuable resources by allowing you to minimize the size of duct structures while maintaining cable density. In some cases, Maxcell eliminates the need for new structures altogether by allowing you to utilize existing duct space.
Maxcell is available in a range of configurations to meet various industry requirements and conduit sizes. Installation and termination accessories are also available.
Reel Information for 3” 3 Cell Product (Std/Plenum/Detectable)
Reel Size
Type of Reel
Std. Product Length
Reel Wt. w/Std. Prod. Length
Max Product On Reel
15"H x 15" W Box
Cardboard
250 ft
28 lbs
250
33"H x 15" W
Wood
500 ft
60 lbs
1250
33"H x 15"W
Wood
1,000 ft
98 lbs
1,250
54"H x 15"W
Wood
2,650 ft
270 lbs
4,400
72"H x 22"W
Steel
5,300 ft
487 lbs
7,100
72"H x 45"W
Steel
10,000 ft
840 lbs
13,500
Reel Information for 2” 2 Cell Product (Std/Plenum/Detectable)
Reel Size
Type of Reel
Std. Product Length
Reel Wt. w/Std. Prod. Length
Max Product On Reel
15"H x 15" W Box
Cardboard
250 ft
20 lbs
250
33"H x 15" W
Wood
500 ft
45 lbs
1,800
33"H x 15"W
Wood
1,000 ft
68 lbs
1,800
54"H x 15"W
Wood
2,650 ft
192 lbs
5,200
72"H x 15"W
Steel
5,300 ft
314 lbs
7,500
72"H x 22"W
Steel
10,000 ft
535 lbs
12,000
Reel Information for 2” 3 Cell Product (Std/Plenum/Detectable)
...............after
another 3" Duct solution.... 
MaxCell
-Maxcell is also a woven sleeve manufactured from polyester monofilaments and designed to optimize allocation of cables within conduit structures. The fabric takes on the shape in the conduit allowing it to conform to the available space. Maxcell simplifies the installation process by allowing several cables to be placed at once so each cable to be added one at a time. This feature makes it the perfect tool for installing new networks initially or up-grading existing ones. Maxcell can also be installed into pre-occupied duct with existing cable-thus maximizing cable density.
American Owned and Operated
.jpg)
.jpg)
