American Tech Supply carries a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard.
Custom options, such as multiple colors per reel and Slit Duct, are also available.We have three manufactures including Premier Corrugated HDPE which is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. It’s ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1", 11/4" and 11/2". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
American Tech Supply an innerduct and duct supplier specializes in fast turnaraound for a Complete Line of Innerduct and Raceway Products including Innerduct, High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. ATS's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickeness. ATS stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
American Tech Supply will provide all your innerduct needs from one 250 coil to a several truckloads of 6" HDPE. Call us today for a competitive price and let us take care of all the logistics of delivering our product to your door.
American
Tech Supply Guarantees "the Best Pricing On All Innerduct."
American
Tech Supply is an active CCR registered supplier for the United
States Government
We
Can Ship the Same Day! Many
Colors Available!
SEE
BELOW ORDERING INFO for 1" & 1.25" Plenum Innerduct- Is In "RED"
[prices do not include shipping,
FOB point PA]
Plenum
Available at 1-
1/2"
and HDPE Innerduct Available in 1/2"
to 6" Sizes
Pricing
for 1" & 1.25" Plenum Innerduct- Is In "RED" [prices
do not include shipping, FOB point PA]
Premier Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation.
Premier Plenum is offered in 1", 11/4" and 11/2, with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
Future growth or maintenance of your interior cable system is made easy with Premier Plenum.
Plenum Reels Ordering Information
Size
Color
Part No.
Nominal
i.d.
Nominal
O.D.
Pull Tape
Reel Size
Reel
Length (ft.)
Pricing- Call- We cannot Offer ONLINE Pricing Due To Daily Prices in Oil and Resin Prices
1"
Orange
P-100T-500
1.049"
1.35"
900 lb
36-36-21
500
1"
Orange
P-100T-1000
1.049"
1.35"
900 lb
36-36-21
1000
1"
Orange
P-100T-2000
1.049"
1.35"
900 lb
44-36-21
2000
1"
Orange
P-100T-2800
1.049"
1.35"
900 lb
48-41-24
2800
1"
Orange
P-100T-5000
1.049"
1.35"
900 lb
66-41-24
5000
1"
Orange
P-100T-6000
1.049"
1.35"
900 lb
72-41-24
6000
1"
Orange
P-100T-9000
1.049"
1.35"
900 lb
82-41-24
9000
11/4"
Orange
P-125T-700
1.25"
1.56"
900 lb
36-36-21
700
11/4"
Orange
P-125T-1500
1.25"
1.56"
900 lb
44-36-21
1500
11/4"
Orange
P-125T-1800
1.25"
1.56"
900 lb
48-41-24
1800
11/4"
Orange
P-125T-3400
1.25"
1.56"
900 lb
66-41-24
3400
11/4"
Orange
P-125T-4000
1.25"
1.56"
900 lb
72-41-24
4000
11/4"
Orange
P-125T-6000
1.25"
1.56"
900 lb
82-41-24
6000
11/2"
Orange
P-150T-500
1.57"
1.80"
900 lb
36-36-21
500
11/2"
Orange
P-150T-700
1.57"
1.80"
900 lb
44-36-21
700
11/2"
Orange
P-150T-1000
1.57"
1.80"
900 lb
48-41-24
1000
11/2"
Orange
P-150T-2500
1.57"
1.80"
900 lb
66-41-24
2500
11/2"
Orange
P-150T-3500
1.57"
1.80"
900 lb
72-41-24
3500
11/2"
Orange
P-150T-5000
1.57"
1.80"
900 lb
82-41-24
5000
Plenum Coils
Size
Color
Part No.
Nominal
i.d.
Nominal
O.D.
Pull Tape
Coil
Length (ft.)
1"
Orange
P-100T-500
1.049"
1.35"
900 lb.
Up to 500
1 1/4"
Orange
P-125T-500
1.25"
1.56"
900 lb.
Up to 500
1 1/2"
Orange
P-150T-350
1.57"
1.80"
900 lb.
Up to 350
Test Results (Using Test Method UL-2024)
Properties
Value
Smoke peak optical
0.02
Smoke average optical density
0.01
Max. flame spread distance (ft.)
1.5'
Max. flame temperature
554°
Sample Part Number
P
100
T
S
2500
Plenum
1" (I.D.)
Polyester Tape
*Slit Duct
(optional)
Put-Up
* Pull tape not available w/ Slit Duct
Split Corrugated
Features & Benefits
No special tools required, simply twist locks together
Pre-slit design for easy installation over existing cables
Flexible corrugated design, readily adapts to cable orientation
Lightweight coils for easy deployment
Bright orange color for quick identification
Available in several diameters from 3/4" to 2" for protecting single or multiple cables
GENERAL INFORMATION
Our Slit is a corrugated slit conduit for use where additional protection and identification is required, such as in underground handholes. Available in bright orange color for rapid identification or aerial (UV formulated) black for use in areas where exposure to sunlight will occur. Fiber-Guard Slit is manufactured in five diameters from 3/4" to 2" in standard 250-ft.coils. Special lengths can be made available upon request but minimum quantities may apply.
Description
Shipping Weight
Fiber-Guard Slit Orange 3/4", 250' coil
11.8 lbs
Fiber-Guard Slit Black 3/4", 250' coil
11.8 lbs
Fiber-Guard Slit Orange 1", 250' coil
16.5 lbs
Fiber-Guard Slit Black 1", 250' coil
16.5 lbs
Fiber-Guard Slit Orange 1-1/4", 250' coil
22.9 lbs.
Fiber-Guard Slit Black 1-1/4", 250' coil
22.9 lbs.
Fiber-Guard Slit Orange 1-1/2", 250' coil
26.3 lbs.
Fiber-Guard Slit Black 1-1/2", 250' coil
26.3 lbs.
Fiber-Guard Slit Orange 2", 250' coil
28.3 lbs.
Fiber-Guard Slit Black 2", 250' coil
28.3 lbs.
Trade Size
Average Outside Diameter OD(inches)
Average Inside Diameter ID (inches)
Weight per Foot (pounds)
3/4"
0.930
0.750
0.037
1"
1.315
1.020
0.057
1-1/4"
1.630
1.330
0.082
1-1/2"
1.875
1.540
0.096
2"
2.300
2.010
0.104
• Flexible and can be worked easily in tight areas.
• Ribbed duct is available with SILICORE® Super Slick Permanent Lining.
• Available with sequential markings in feet or meters.• Can withstand typical pulling loads and is highly resistant to crushing forces.
• High Density Polyethylene (HDPE) resists oils, gasoline and other compounds.• Outside ribbed is ideal when installing multiple sub-ducts into a larger main duct.
Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
We
can deliver a 500 Foot Reel of Innderduct (NOT PLENUM) to Most Locations
In the United States For As Little As $150.00 Per 500 Foot Coil
ATS
- Specializes In Rapid
Turnaround
"Last
Minute Change Orders" ?- Can't get your product from
your local distributor?- Your Contractor Installed the wrong
duct and you need something right away?- "Forgot about
the duct and fiber needs instaled over the weekend?"
- "Maybe need something shipped in 48 hours?- We specialize
in last minute turnarounds- Premier prides itself as a rapid-
turn around specialist as we want to earn your business!
Call us for your large projects as well- GOVERNMENT-MILITARY
WELCOME!
CALL
TODAY (866) 650-DATAor
(866) 342-3721
Colors and Identification
Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.
Other Identification
Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
Custom imprints such as company name, project name or any other special identification markings also available
Options
Lubrication
Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
Pre-installed pull tape, tracer tape
Smooth Wall Innerduct 1/2" to 6" Diameter
Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications.
Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Blue Diamond’s ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.
Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.
Figure 8 DuctSmooth Wall Innerduct 1/2" to 6" Diameter
Blue Diamond’s figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct.
Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.
CustomColorsAreAvailable
Striping-Private Labeling Also Available
Looking for a reliable- Alternative Conduit Source?
We offer plenum innerduct from Premier Conduit who is a manufacturer of plenum, riser and corrugated conduit. We offer superior quality conduit at competitive prices and immediate service. Call us today (866) 650-DATA or see our product sheets. Premier Corrugated Duct- (Outside Plant)