|
Smoothwall Innerduct- 1" Smoothwall Innerduct- 2" Smoothwall Innerduct-4" Smoothwall Innerduct- 6" Smoothwall Innerduct
 -----  -------
 We Offer Innerduct Smoothwall from 3/4" to 16" - Minimums May Be Required- See Info
American
Tech Supply is an active SAM registered supplier for the United
States Government
American Tech Supply is a a national innerduct supplier and stocks 1" smoothwall innerduct, 2" smoothwall innerduct, 3" smoothwall innerduct, 4" smoothwall innerduct and 6" smoothwall innerduct. As a national duct supplier we specialize in fast turnaraound for a Complete Line of Innerduct and Raceway Products including Innerduct, ladder rack,High Density Polyethlene Duct, Outside Plant Innerduct, HDPE, Most OSP Duct ,Plenum Innerduct,Corrugated Innerduct, Corrugated HDPE, Riser Rated Innerduct, Outside Plant Conduit, Fiber Optic duct and our custom Pre-Installed Fiber In Duct. ATS's HDPE innerduct is available in sizes ranging from 1/2" to 6" inches in diameter with several SDR or HDPE innerduct wall thickeness.
ATS stocks many sizes of innerduct and can ship most innerduct orders including custom- including colored innerduct within 48 hours. Our corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing duct. Our corrugated innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Our Corrugated innerduct is available in 1" and 1 1/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
Our High Density Polyethylene (HDPE) Innerduct is made of 100% Virgin Resin. The Innerduct can be manufactured in almost any color and has outstanding UV protection. Orange, Black, Red, Blue and Green are the most common conduit colors. We can provide multiple duct and colors on one reel to maximize space in a trench. All of our Innerduct is sequencally marked every foot and can be purchased with or without pull tape. The Innderduct has a silicore lining on the inside to prevent cable drag friction. SDR wall thicknesses are contingent on the type of projects projected. Schedule 40, SDR 15.5, SDR 13.5, SDR 11 and SDR 9 are all standard wall thickness.
 |
• Made from tough High Density Polyethylene (HDPE).
• Flexible and can be worked easily in tight areas.
• Excellent low temperature properties.
• Superior resistance to natural or mechanical damage.
• Available with sequential markings in feet or meters.• Smoothwall is available with SILICORE® Super Slick Permanent Lining. |
 |
|
Corrugated HDPE (High Density Polyethylene) Reel Dimensions
ETL verified
SIZE |
Color |
Part Number |
Nominal ID (Inside) |
Nominal OD (Outside) |
Pull Tape |
Reel Size |
Reel Length (Feet) |
1 inch |
Orange |
PEC-100T-1000 |
1.049" |
1.365" |
900 lb |
48-30-24 |
1000 Feet |
1 inch |
Orange |
PEC-100T-1800 |
1.049" |
1.365" |
900 lb |
48-30-24 |
1800 Feet |
1 inch |
Orange |
PEC-100T-2500 |
1.049" |
1.365" |
900 lb |
66-41-24 |
2500 Feet |
1 inch |
Orange |
PEC-100T-5000 |
1.049" |
1.365" |
900 lb |
72-41-24 |
5000 Feet |
1 inch |
Orange |
PEC-100T-6500 |
1.049" |
1.365" |
900 lb |
72-45-24 |
6500 Feet |
1 inch |
Orange |
PEC-100T-8000 |
1.049" |
1.365" |
900 lb |
82-41-24 |
8000 Feet |
1 1/4" |
Orange |
PEC-125T-1000 |
1.250" |
1.550" |
900 lb |
48-30-24 |
1000 Feet |
1 1/4" |
Orange |
PEC-125T-2500 |
1.250" |
1.550" |
900 lb |
66-41-24 |
2500 Feet |
1 1/4" |
Orange |
PEC-125T-4000 |
1.250" |
1.550" |
900 lb |
72-41-24 |
4000 Feet |
1 1/4" |
Orange |
PEC-125T-5000 |
1.250" |
1.550" |
900 lb |
72-41-24 |
5000 Feet |
1 1/4" |
Orange |
PEC-125T-6000 |
1.250" |
1.550" |
900 lb |
82-41-24 |
6000 Feet |
1 1/4" |
Orange |
PEC-125T-6500 |
1.250" |
1.550" |
900 lb |
82-41-24 |
6500 Feet |
ENDOT AVAILABLE SMOOTHWALL INNERDUCTS
Part |
|
----------------- Nominal ------------------------------ |
|
|
No.* |
SDR |
SIZE |
O.D. |
I.D. |
Minimal Wall |
086/11 |
11 |
3/4" |
(19mm) |
1.05" |
(26.7mm) |
0.860" |
(21.8mm) |
0.095" |
(2.4mm) |
086/13.5 |
13.5 |
3/4" |
(19mm) |
1.05" |
(26.7mm) |
0.894" |
(22.7mm) |
0.078" |
(2.0mm) |
086/15.5 |
15.5 |
3/4" |
(19mm) |
1.05" |
(26.7mm) |
0.914" |
(23.2mm) |
0.068" |
(1.7mm) |
|
|
|
|
|
|
|
|
|
|
131/11 |
11 |
1" |
(25mm) |
1.315" |
(33.4mm) |
1.075" |
(27.3mm) |
0.120" |
(3.1mm) |
131/13.5 |
13.5 |
1" |
(25mm) |
1.315" |
(33.4mm) |
1.121" |
(28.5mm) |
0.097" |
(2.5mm) |
131/15.5 |
15.5 |
1" |
(25mm) |
1.315" |
(33.4mm) |
1.147" |
(29.1mm) |
0.084" |
(2.1mm) |
|
|
|
|
|
|
|
|
|
|
166/11 |
11 |
1 1/4" |
(32mm) |
1.660" |
(42.2mm) |
1.358" |
(34.5mm) |
0.151" |
(3.8mm) |
166/13.5 |
13.5 |
1 1/4" |
(32mm) |
1.660" |
(42.2mm) |
1.414" |
(35.9mm) |
0.123" |
(3.1mm) |
166/15.5 |
15.5 |
1 1/4" |
(32mm) |
1.660" |
(42.2mm) |
1.446" |
(36.7mm) |
0.107" |
(2.7mm) |
|
|
|
|
|
|
|
|
|
|
190/11 |
11 |
1 1/2" |
(38mm) |
1.900" |
(48.3mm) |
1.554" |
(39.5mm) |
0.173" |
(4.4mm) |
190/13.5 |
13.5 |
1 1/2" |
(38mm) |
1.900" |
(48.3mm) |
1.618" |
(41.1mm) |
0.141" |
(3.6mm) |
190/15.5 |
15.5 |
1 1/2" |
(38mm) |
1.900" |
(48.3mm) |
1.654" |
(42.0mm) |
0.123" |
(3.1mm) |
|
|
|
|
|
|
|
|
|
|
237/11 |
11 |
2" |
(51mm) |
2.375" |
(60.3mm) |
1.943" |
(49.4mm) |
0.216" |
(5.5mm) |
237/13.5 |
13.5 |
2" |
(51mm) |
2.375" |
(60.3mm) |
2.023" |
(51.4mm) |
0.176" |
(4.5mm) |
237/15.5 |
15.5 |
2" |
(51mm) |
2.375" |
(60.3mm) |
2.069" |
(52.6mm) |
0.153" |
(3.9mm) |
|
|
|
|
|
|
|
|
|
|
American Tech Supply will DROP-SHIP all your innerduct needs from one 250 coil to a several truckloads of 6" HDPE. Call us today for a competitive price and let us take care of all the logistics of delivering our product to your door.
We
Can Ship the Same Day!  Many
Colors Available!
 THE
BELOW PRICES ARE TYPICAL SUGGESTED PRICES- DUE TO THE PRICE OF OIL-
THE PRICES CAN FLUCTUATE DAILY-PLEASE CALL (866) 342-3721 FOR UP
TO DATE PRICING
Part No |
Description |
Ft |
Price |
| P-100T-5000 |
1" Plenum Innerduct w/tape [REEL] |
5000 |
Call |
| P-100T-1000 |
1" Plenum Innerduct w/tape [COIL] |
1000 |
Call |
| P-100T-500 |
1" Plenum Innerduct w/tape [COIL] |
500 |
Call |
| P-100T-250 |
1" Plenum Innerduct w/tape [COIL] |
250 |
Call |
|
|
|
|
| P-125T-5000 |
1 ¼” Plenum Innerductw/tape [REEL] |
5000 |
Call |
| P-125T-1000 |
1 ¼” Plenum Innerductw/tape [COIL] |
1000 |
Call |
| P-125T-500 |
1 ¼” Plenum Innerductw/tape [COIL] |
500 |
Call |
| P-125T-250 |
1 ¼” Plenum Innerductw/tape [COIL] |
250 |
Call |
Pricing for 1" & 1.25" HDPE Innerduct *HDPE orders under 5000 ft subject to a $60.00 reel charge, Coil prices listed
Part No |
Description |
Ft |
Price |
| PEC-100T-5000 |
1" HDPE Innerduct w/tape [REEL] |
5000 |
Call |
| PEC-100T-1000 |
1" HDPE Innerduct w/tape [COIL] |
1000 |
Call |
| PEC-100T-500 |
1" HDPE Innerduct w/tape [COIL] |
500 |
Call |
| PEC-100T-250 |
1" HDPE Innerduct w/tape [COIL] |
250 |
Call |
|
|
|
|
| PEC-125T-5000 |
1 ¼” HDPE Innerductw/tape [REEL] |
5000 |
Call |
| PEC-125T-1000 |
1 ¼” HDPE Innerductw/tape [COIL] |
1000 |
Call |
| PEC-125T-500 |
1 ¼” HDPE Innerductw/tape [COIL] |
500 |
Call |
| PEC-125T-250 |
1 ¼” HDPE Innerductw/tape [COIL] |
250 |
Call |
Pricing for 1-1/2" Plenum & HDPE- Smoothwall Innerduct - For Larger Diameter Sizes- Please Call (866) 342-3721 First Due To The Fluctuating Oil and Resin Wholesale Prices
Part No |
Description |
Ft |
Price |
| PEC-150T-5000 |
1 ½ " HDPE Innerduct w/tape [REEL] |
5000 |
Call |
| PEC-150T-1000 |
1 ½ " HDPE Innerduct w/tape [COIL] |
1000 |
Call |
| PEC-150T-500 |
1 ½ " HDPE Innerduct w/tape [COIL] |
500 |
Call |
| PEC-150T-250 |
1 ½ " HDPE Innerduct w/tape [COIL] |
250 |
Call |
|
|
|
|
| P-150T-5000 |
1 ½” PLENUM Innerductw/tape [REEL] |
5000 |
CALL |
| P-1505T-1000 |
1 ½” PLENUM Innerductw/tape [COIL] |
1000 |
CALL |
| P-150T-500 |
1 ½” PLENUM Innerductw/tape [COIL] |
500 |
CALL |
| P-150T-250 |
1 ½” PLENUM Innerductw/tape [COIL] |
250 |
CALL |
Volume discounts always apply. Please call our sales offices to obtain custom quotes
Prices reflect COD and do not include shipping or processing fees.
 We Carry A Complete Array of Innerduct Couplers
American Tech Supply also carries HDPE -high density polyethylene innerduct in sizes ranging from 1/2" to 6" and is avaialable ina multitude of colors. Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Our smooth wall innerduct is a durable high quality product for direct burial applications.
ATS also carries Ribbed wall innerduct which innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating.
 Our Tracer wire innerduct provides a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products.
|
American
Tech Supply Will NOT BE UNDERSOLD- Call Us Today For
All Your Innerduct & Duct Needs -We Will Beat Any U.S.
Based Price! |
 UL Listed-We Now Offer Pre- Installed Fiber Cable In Our Innerduct- Ask Us For Details- (866) 342-3721
ATS can ship many HDPE innerduct and HDPE duct products the same day, however on special orders and colors please be advised that we require 7-10 days to process your innerduct order. Thank you.
 HDPE Innerduct Available To 1/2" TO 6" Innerduct Diameter Sizes
Colors and Identification
- Standard colors available in: white, black, blue, green, red, orange, lilac, grey, yellow, brown, buff, terra cotta.
- Striping: Striping combinations are available in all colors in combinations of single, double, triple and quad stripes.
Other Identification
- Innerduct size, SDR and sequential footage markings every 2’ are laser imprinted on every order.
- Custom imprints such as company name, project name or any other special identification markings also available
Options
- Lubrication
- Up to four lengths/colors of innerduct per reel available laid in parallel or segmented on a reel.
- Pre-installed pull tape, tracer tape
|
Smooth Wall Innerduct 1/2" to 6" Diameter
Smooth wall is the standard High Density Polyethylene (HDPE) Duct. The interior of smooth wall has a glass-like finish which delivers the lowest coefficient of friction of all available non-lubricated innerducts. Blue Diamond smooth wall innerduct is a durable high quality product for direct burial applications. |
|
Ribbed Wall Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Our ribbed wall innerduct is designed to allow extremely long cable pulls to glide through the interior raised ribs. All ribbed wall innerduct is internally ribbed and available in any SDR and SIDR rating. |
|
Tracer Wire Innerduct Smooth Wall Innerduct 1/2" to 6" Diameter
Tracer wire innerduct provide a method of locating underground fiber optic cable. The tracer wire is a single copper wire co-extruded into the innerduct providing a corrosion resistant conductor. An alternative method of locating buried fiber optic cable is to use detectable tape, available pre-installed in any of our duct products. |
 |
Figure 8 Duct Smooth Wall Innerduct 1/2" to 6" Diameter
Our figure 8 innerduct features a high tensile galvanized support strand for aerial placement of duct. The support strand is an integral component of the co-extruded duct. |
Plenum
Available at 1-
1/2"
and HDPE Innerduct Available in 1/2"
to 6" Sizes
 Pricing
for 1" & 1.25" Plenum Innerduct- Is In "RED"
[Prices do not include shipping, FOB point PA]
Plenum innerduct is offered in 1"and 11/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.American Tech Supply provides turnaraound for corrugated innerduct by providing rapid shipping service that we have in stock including a complete Line of ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct. Plenum innerduct is ideal for pulls under 1000 ft. and is designed to reduce surface contact when pulling cable. Our plenum innerduct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Our Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is tandard. Custom options, such as multiple colors per reel and Slit Duct, are also available.This lightweight product offers maximum flexibility, and allows for installation in small or restricted areas. Corrugated duct is available in 1" and 11/4". The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available.
 Corrugated HDPE Innerduct
Corrugated HDPE (High Density Polyethylene) Reel Dimensions
ETL verified
SIZE |
Color |
Part Number |
Nominal ID (Inside) |
Nominal OD (Outside) |
Pull Tape |
Reel Size |
Reel Length (Feet) |
1 inch |
Orange |
PEC-100T-1000 |
1.049" |
1.365" |
900 lb |
48-30-24 |
1000 Feet |
1 inch |
Orange |
PEC-100T-1800 |
1.049" |
1.365" |
900 lb |
48-30-24 |
1800 Feet |
1 inch |
Orange |
PEC-100T-2500 |
1.049" |
1.365" |
900 lb |
66-41-24 |
2500 Feet |
1 inch |
Orange |
PEC-100T-5000 |
1.049" |
1.365" |
900 lb |
72-41-24 |
5000 Feet |
1 inch |
Orange |
PEC-100T-6500 |
1.049" |
1.365" |
900 lb |
72-45-24 |
6500 Feet |
1 inch |
Orange |
PEC-100T-8000 |
1.049" |
1.365" |
900 lb |
82-41-24 |
8000 Feet |
1 1/4" |
Orange |
PEC-125T-1000 |
1.250" |
1.550" |
900 lb |
48-30-24 |
1000 Feet |
1 1/4" |
Orange |
PEC-125T-2500 |
1.250" |
1.550" |
900 lb |
66-41-24 |
2500 Feet |
1 1/4" |
Orange |
PEC-125T-4000 |
1.250" |
1.550" |
900 lb |
72-41-24 |
4000 Feet |
1 1/4" |
Orange |
PEC-125T-5000 |
1.250" |
1.550" |
900 lb |
72-41-24 |
5000 Feet |
1 1/4" |
Orange |
PEC-125T-6000 |
1.250" |
1.550" |
900 lb |
82-41-24 |
6000 Feet |
1 1/4" |
Orange |
PEC-125T-6500 |
1.250" |
1.550" |
900 lb |
82-41-24 |
6500 Feet |
Corrugate HDPE (High Density Polyethylene) Reel Dimensions
ETL verified
Size |
Color |
Part Number |
Nominal ID |
Nominal OD |
Pull Tape |
Coil Length |
1 Inch |
Orange |
PEC-100T-250 |
1.049" |
1.365" |
900 lb |
250 Feet |
1 Inch |
Orange |
PEC-100T-500 |
1.049" |
1.365" |
900 lb |
500 Feet |
1 1/4" |
Orange |
PEC-125T-250 |
1.250" |
1.550" |
900 lb |
250 Feet |
1 1/4" |
Orange |
PEC-125T-500 |
1.250" |
1.550" |
900 lb |
500 Feet |
How
to build a part number For Large Diameter Duct
Prefix |
Size |
Wall Thickness |
Color |
Stripes |
Ribbed interior |
Tape |
BDI |
06 = ½” |
2 = SDR 9 |
OR = Orange |
ORS =Orange Stripe |
RI |
T10 = 1000# tape |
| |
09 = ¾’ |
3 = SDR 11 |
BL = Blue |
BLS = Blue Stripe |
|
T12.5 = 1250# tape |
| |
11 = 1” |
4 = SDR 13.5 |
BK = Black |
BKS = Black Stripe |
|
T18 = 1800 # tape |
| |
13 = 1 ¼” |
5 = SCH 40 |
GR = Green |
GRS = Green Stripe |
|
T25 = 2500# tape |
| |
16 = 1 ½” |
6 = SDR 15.5 |
RD = Red |
RDS = Red Stripe |
|
MT = 1250# detectable tape |
| |
21 = 2” |
7 = SCH 80 |
YL = Yellow |
YLS = Yellow Stripe |
|
|
| |
31 = 3” |
8 = SDR 17 |
WH = White |
WHS = White Stripe |
|
|
| |
41 = 4” |
|
GY = Gray |
GYS = Gray Stripe |
|
|
| |
51 = 5” |
|
BR = Brown |
BRS = Brown Stripe |
|
|
| |
61 = 6” |
|
BF = Buff |
BF = Buff Stripe |
|
|
| |
|
|
TC = Terra Cotta |
TCS = Terra Cotta Stripe |
|
|
| |
|
|
LI = Lilac |
LIS = Lilac Stripe |
 Duct Plugs
Blue Diamond duct plugs seal your conduit or innerduct from water, animals, debris or any other underground intrusion. Available in various sizes and models, duct plugs are designed for easy retrofitting and removal. Duct plugs help protect and seal occupied and unoccupied conduit and innerduct in an extensive range of applications.
American Tech Supply is a supplier of Innerduct, OSP, HDPE, Riser Rated Innerduct, Plenum Innerduct, Corrugated duct, Outside Plant Conduit, Fiber Optic Duct, ETL Verified Conduit
Corrugated
HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene
(HDPE) and is intended to be placed inside of existing innerduct.
It¹s ideal for pulls under 1000 ft. and is designed to reduce
surface contact when pulling cable. This lightweight product offers
maximum flexibility, and allows for installation in small or restricted
areas. Corrugated duct is available in 1" and 11/4". The
standard color is orange and is offered in a variety of other colors.
Sequential marked footage is standard. Custom options, such as multiple
colors per reel and Slit Duct, are also available.
** Core rebates are available for reels broken down and returned to the manufacturer. Call our offices for details
Prices reflect COD and do not include shipping or processing fees. Please add a 3% minimum charge for all credit card orders.
Slit Duct-Endot Slit Duct-Slit Innerduct-Innerduct-Riser Rated Innerduct
ROCKAWAY, NJ - We also specialize in last minute rapid turnaround and delivery. our new corrugated slit duct is made of low-density polyethylene plastic for greater flexibility when joining and racking innerducts. Easy to use, it slides readily over fiber optic cable and inside innerduct. The slit duct is offered in 250-foot lengths that can be cut for application in the field. It is available in high-visibility orange in sizes from 1/2" ID through 2" ID.innerduct, corrugated inneduct, and plenum innerduct that is also ETL verified Innerduct, plenum innerduct, fiber optic duct, conduit and raceway systems including Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Toneable Duct, Corrugated Innerduct and more. Corrugated HDPE Premier Corrugated HDPE is manufactured from High Density Polyethylene (HDPE) and is intended to be placed inside of existing innerduct.
| Part Number |
Description |
Packaging |
List Price- Please Call For Discounts |
| ICS 050 41 01 02-250 |
1/2 " Corrugated Split Duct |
250 Foot Coil |
$ .45 Foot |
| ICS 075 41 01 02-250 |
3/4" Corrugated Split Duct |
250 Foot Coil |
$ .55 Foot |
| ICS 100 41 01 02-250 |
1" Corrugated Split Duct |
250 Foot Coil |
$ .68 Foot |
| ICS 125 41 01 02-250 |
1 1/4" Corrugated Split Duct |
250 Foot Coil |
$ .85 Foot |
| ICS 150 41 01 02-250 |
1" Corrugated Split Duct |
250 Foot Coil |
$.95 Foor |
| ICS 150 41 01 02-250 |
1" Corrugated Split Duct |
250 Foot Coil |
$ 1.15 Foot |
 OurPlenum
Innerduct Meets UL 910 & UL 2024-
 85%
Fill Ratio Cable Guide!
American Tech Supply also carries a complete line of plenum innerduct and plenum raceway products including Plenum Fiber Duct, Outside Plant Conduit, Plenum Innerduct, Riser Rated Innerduct, Corrugated Innerduct and more. Plenum Duct is a flexible, non-metallic, corrugated raceway used for effective cable and fiber optic management within interior raceways. Premier-Plenum meets UL-(910) standards for the National Electrical Code, Article 770, and satisfies UL-2024 standards for low smoke and flame propagation. Pur Plenum duct is offered in 1" and 1 1/4", with pre-installed pull tape for easy cable installation. The standard color is orange and is offered in a variety of other colors. Sequential marked footage is standard. Custom options, such as multiple colors per reel and Slit Duct, are also available..
We
can deliver a 500 Foot Reel of Innderduct to Most Locations In
the United States For about $150.00 Per 500 Foot Coil Call Us
at (866) 342-3721 or 650-DATA
"Contractor Installed the wrong duct & fiber needs to be installed this weekend?
"Your local distributor has no duct in stock or has the wrong duct and needs it right away?"
"You
have everything, the fiber cable, testers, jacks, but the duct-
and you need it right away?"- We specialize in Rapid- 24-
48 Hour Turnaround
View PDF White Paper On Cable Guide here 
Cable
Guide fabric innerduct that is equivalent to Maxcell allows you
to place the maximum number of cables in any type of conduit network
structure. By taking the shape of the cables placed within, Cable
Guide allows you to utilize up to 80% of available duct space-Click
For Complete Information About Cable Guide
Fabric Innerduct.
HDPE Innerduct Specifications
Call
For Latest Pricing (866) FIBER-21
HDPE Innerduct Specifications
Looking for an alternative conduit source?
We offer superior quality conduit at competitive prices and immediate service.
Home
| Cables | Switches
| Contact Us | Our
Team | Locations
|
.jpg)
.jpg)
.jpg)
