MRV Products
The Fiber DriverT family includes three types of switch modules: three-,
four-, and six-port Ethernet/Fast Ethernet switches. Switch modules
are used to link between 10Mbps and 100Mbps or Half to Full Duplex
mode. Switch modules offer a combination of 10/100Base-TX ports and
100Base-FX ports. They separate between Ethernet collision domains
and filter local traffic from propagating to the rest of the network.
Switch modules receive power directly from the chassis. They are hot-swappable
and SNMP configurable when installed in a managed Fiber Driver chassis
with the Fiber Driver management module. They can be configured via
Fiber Driver's MegaVision WebT comprehensive NMS or by any SNMP MIB
browser. Switch modules support basic port configuration such as speed
and Duplex Mode, but do not support Spanning Tree or VLAN configuration.
All switch modules support aging and can forward extended size frames,
including jumbo frames up to 6k and the 802.1Q VLAN packet format
of 1536. |
|
MRV Products
By Category
Out-of-Band Console & Power Management
Pluggables
Wave Division Multiplexing
By Product Line
OptiSwitch
TereScope
|