Ask about our USA Made CAT6- CAT 6A and CAT 7 Patch Cords
Outdoor Fiber Splice Closures- Fiber Splice Closures- Aerial Fiber Splice Closures- Above Ground Splice Closures-Cicada's Advanced Fiber Splice Vault (ASV) provides a lockable, light-weight, OSP enclosure for isolating splices between Outside Plant (OSP) cable to IntraFacility Cable (IFC). Outside plant closure product line from OFS. Engineered and tested by Lucent / AT&T / Bell Labs to provide the highest level of environmental protection for optical cable splices, we now manufacture the OFS closures in our Albany, GA facility. Whether your application calls for buffered or ribbon-type cables, or there are requirements for mechanical or fusion splices, we have splice organizer trays which will meet your needs. We also specialize in customizing products to your specifications.They are available in several sizes to accommodate from 144 fiber terminations, 288 fiber terminations, 576 fiber terminations up to 864 fiber optic splices. ASVs mount to interior walls or unistruts nearby OSP cable entrance. Cables enter the ASV through knockouts on top, bottom, and/or sides. They can be clamped internally and where necessary grounded to bus bar.
Comcode: 107 395 493CT
Base Closure assembly (288 individual splices, 576 mass fiber splice capacity). Note: Grommet and Grip kits, Splice tray organizers, and bonding hardware are ordered separately
Comcode: 107 872 053CT
2600LG/SC Base Closure assembly with one HFC-UT grommet and grip kitfor 0.70 to 0.90 inch (17.8 to 22.9 mm) high fiber count cables, and three mass splice trays.
Comcode: 108 317 595CT
2600LG/SC Base Closure assembly and two 36-splice trays. Note: Provides a single airtight, watertight seal on the cable jacket. The 0.4 to 0.85 inch (10 to 21.5 mm) Zoom grommet and grip kit simplifies the installation on both unit tube and loose tube type cable.
Comcode: 108 317 603CT
2600LG/SC Base Closure assembly and two mass fusion splice trays. Note: Provides a single airtight, watertight seal on the cable jacket. The 0.4 to 0.85 inch (10 to 21.5 mm) Zoom grommet and grip kit simplifies the installation on both unit tube and loose tube type cable.
The 2600LG Fiber Optic Splice Closure provides an effi-
cient, craft friendly design for fiber/ribbon routing, storage,
organization, and protection. It is designed to accommodate
express fibers or ribbons. The closure consists of a rein-
forced, thermoplastic, standalone envelope, and an endplate
assembly with corrosion resistant hardware. The closure is
approximately 31 inches (78.7 cm) long, 9 inches (22.9 cm)
wide (diameter), and weighs about 17 pounds (7.7 kg).
Its design includes an integrated fiber/ribbon breakout
device. All cable and endplate seals are composed of resil-
ient and reusable materials - no mastic tapes, cords or heat
shrink materials are required. High-quality, state-of-the-art
materials are used throughout the 2600LG Closure to assure
reliability and long-term performance.
Splice organizer trays are available for 24 or 36 individual
fiber splices. The 24-splice organizer tray conveniently
stores individual fusion, CSL LightSplice Systems, and
most other commonly used splices. The 36-splice organizer
tray accommodates non-polish mechanical (CSL) or fusion
splices. A mass splice organizer tray is also available and
holds 12 mass fusion and mass mechanical splices (144 fiber
splices). The closure can accommodate a maximum of eight
24-splice (192 splices) or 36-splice (288 splices) organizer
trays or four mass fusion splice organizer trays for a total of
576 fiber splices. In addition, a connector tray is available
for ST®, SC, and most other types of connectors, accom-
modating eight connections per tray or 32 connections per
closure using four trays. When using miniature connectors,
more than eight connections per tray can be made.
Because the 2600LG Fiber Optic Splice Closure is a general-
purpose splice closure, you can minimize inventory require-
ments and save storage space by specifying just one closure
type for the majority of your outside plant applications. The
closure will accept six cables in a butt configuration. It has
a capacity of 288 individual fiber splices (8 trays with 36
splices/tray) or 48 mass splices (576-fiber splice capacity,
4 trays with 144 splices/tray) using a mass fusion or mass mechanical splice
The 2600LG Fiber Optic Splice Closure provides an effi -
cient, craft friendly design for fi ber/ribbon routing, storage,
organization, and protection. It is designed to accommodate
express fi bers or ribbons. The closure consists of a reinforced,
thermoplastic, standalone envelope, and an endplate
assembly with corrosion resistant hardware. The closure is
approximately 31 inches (78.7 cm) long, 9 inches (22.9 cm)
wide (diameter), and weighs about 17 pounds (7.7 kg).
Its design includes an integrated fi ber/ribbon breakout
device. All cable and endplate seals are composed of resilient
and reusable materials - no mastic tapes, cords or heat
shrink materials are required. High-quality, state-of-the-art
materials are used throughout the 2600LG Closure to assure
reliability and long-term performance.
Splice organizer trays are available for 24 or 36 individual
fi ber splices. The 24-splice organizer tray conveniently
stores individual fusion, CSL LightSplice Systems, and
most other commonly used splices. The 36-splice organizer
tray accommodates non-polish mechanical (CSL) or fusion
splices. A mass splice organizer tray is also available and
holds 12 mass fusion and mass mechanical splices (144 fi ber
splices). The closure can accommodate a maximum of eight
24-splice (192 splices) or 36-splice (288 splices) organizer
trays or four mass fusion splice organizer trays for a total of
576 fi ber splices. In addition, a connector tray is available
for ST®, SC, and most other types of connectors, accommodating
eight connections per tray or 32 connections per
closure using four trays. When using miniature connectors,
more than eight connections per tray can be made.
Because the 2600LG Fiber Optic Splice Closure is a generalpurpose
splice closure, you can minimize inventory requirements
and save storage space by specifying just one closure
type for the majority of your outside plant applications. The
closure will accept six cables in a butt confi guration. It has
a capacity of 288 individual fi ber splices (8 trays with 36
splices/tray) or 48 mass splices (576-fiber splice capacity,
4 trays with 144 splices/tray) using a mass fusion or mass mechanical splice
The 2600LG Fiber Optic Splice Closure provides an effi -
cient, craft friendly design for fi ber/ribbon routing, storage,
organization, and protection. It is designed to accommodate
express fi bers or ribbons. The closure consists of a reinforced,
thermoplastic, standalone envelope, and an endplate
assembly with corrosion resistant hardware. The closure is
approximately 31 inches (78.7 cm) long, 9 inches (22.9 cm)
wide (diameter), and weighs about 17 pounds (7.7 kg).
Its design includes an integrated fi ber/ribbon breakout
device. All cable and endplate seals are composed of resilient
and reusable materials - no mastic tapes, cords or heat
shrink materials are required. High-quality, state-of-the-art
materials are used throughout the 2600LG Closure to assure
reliability and long-term performance.
Splice organizer trays are available for 24 or 36 individual
fi ber splices. The 24-splice organizer tray conveniently
stores individual fusion, CSL LightSplice Systems, and
most other commonly used splices. The 36-splice organizer
tray accommodates non-polish mechanical (CSL) or fusion
splices. A mass splice organizer tray is also available and
holds 12 mass fusion and mass mechanical splices (144 fi ber
splices). The closure can accommodate a maximum of eight
24-splice (192 splices) or 36-splice (288 splices) organizer
trays or four mass fusion splice organizer trays for a total of
576 fi ber splices. In addition, a connector tray is available
for ST®, SC, and most other types of connectors, accommodating
eight connections per tray or 32 connections per
closure using four trays. When using miniature connectors,
more than eight connections per tray can be made.
Because the 2600LG Fiber Optic Splice Closure is a generalpurpose
splice closure, you can minimize inventory requirements
and save storage space by specifying just one closure
type for the majority of your outside plant applications. The
closure will accept six cables in a butt confi guration. It has
a capacity of 288 individual fi ber splices (8 trays with 36
splices/tray) or 48 mass splices (576-fi ber splice capacity,
4 trays with 144 splices/tray) using a mass fusion or mass mechanical splice
The 2600LG Fiber Optic Splice Closure provides an effi -
cient, craft friendly design for fi ber/ribbon routing, storage,
organization, and protection. It is designed to accommodate
express fi bers or ribbons. The closure consists of a reinforced,
thermoplastic, standalone envelope, and an endplate
assembly with corrosion resistant hardware. The closure is
approximately 31 inches (78.7 cm) long, 9 inches (22.9 cm)
wide (diameter), and weighs about 17 pounds (7.7 kg).
Its design includes an integrated fi ber/ribbon breakout
device. All cable and endplate seals are composed of resilient
and reusable materials - no mastic tapes, cords or heat
shrink materials are required. High-quality, state-of-the-art
materials are used throughout the 2600LG Closure to assure
reliability and long-term performance.
Splice organizer trays are available for 24 or 36 individual
fi ber splices. The 24-splice organizer tray conveniently
stores individual fusion, CSL LightSplice Systems, and
most other commonly used splices. The 36-splice organizer
tray accommodates non-polish mechanical (CSL) or fusion
splices. A mass splice organizer tray is also available and
holds 12 mass fusion and mass mechanical splices (144 fi ber
splices). The closure can accommodate a maximum of eight
24-splice (192 splices) or 36-splice (288 splices) organizer
trays or four mass fusion splice organizer trays for a total of
576 fi ber splices. In addition, a connector tray is available
for ST®, SC, and most other types of connectors, accommodating
eight connections per tray or 32 connections per
closure using four trays. When using miniature connectors,
more than eight connections per tray can be made.
Because the 2600LG Fiber Optic Splice Closure is a generalpurpose
splice closure, you can minimize inventory requirements
and save storage space by specifying just one closure
type for the majority of your outside plant applications. The
closure will accept six cables in a butt confi guration. It has
a capacity of 288 individual fi ber splices (8 trays with 36
splices/tray) or 48 mass splices (576-fi ber splice capacity,
4 trays with 144 splices/tray) using a mass fusion or mass mechanical splice
Fiber Splice Grounding and Bonding Closures by Cicada. Engineered and tested by OFS,Lucent / AT&T / Bell Labs to provide the highest level of environmental protection for optical cable splices
Please view our OSP Closure Page with the sizes we carry. Our turnaround with our partner manufacturer in Arkansas will allow you to receive your custom osp vault or osp enclosure in less than one- third of the lead time and at the same time same at least 20%- Call us at (866) 342-3721 and visit our osp dimensions page here.
American
Tech Supply, a registered CCR contracting supply companyhas teamed up with Corning, Telect,Pencell, Century, AFL Telecommunications,
Commscope,Panduit, Emerson, Knurr, Hoffman, Highline,Draka USA, ADC, Carlon,Telco and several other leading fiber optic osp enclosure equipment manufacturers
to offer our contractors, RBOC's, FTTH buildout companies a complete array of OSP underground vaults, underground pull boxes, underground cabinets a & underground boxes at affordable prices. We also national defense fiber optic security systems customers including any defense
department or government entity a fiber optic intrusion prevention system called
the Fiber Sentinel that will help prevent hackers or malicious intruders to break
into our national defense using fiber optic technologies. We also carry a complete
array of fiber optic enclosures to house all your fiber optic equipment inside the building as well as outside.
OSP Fiber Vaults - OSP Vaults-Fiber Optic Vaults-FTTH Vaults-FTTH Enclosures- OSP Fiber Enclosures- OSP Enclosures The Advanced Splice Vault (ASV) is a versatile transition point for splicing optical cables near the cable entrance of a network facility. This low-profile splicing solution provides enhanced cable management, multiple cable entrance points, and a broad range of termination solutions to accommodate today’s dynamic networks.
We now carry Multilink Enclosures!
OSP- Outside Plant Fiber Splice Vaults
Telect’s Advanced Fiber Splice Vault (ASV) provides a lockable, light-weight, metal enclosure for isolating splices between Outside Plant (OSP) cable to IntraFacility Cable (IFC). They are available in three sizes to accommodate from 144 fiber terminations, 288 fiber terminations, 576 fiber terminations up to 864 fiber optic splices. ASVs mount to interior walls or unistruts nearby OSP cable entrance. Cables enter the ASV through knockouts on top, bottom, and/or sides. They can be clamped internally and where necessary grounded to bus bars.
Just
click on any of the OSP fiber optic enclosures below.ATS
carries several models of OSP enclosures from several manufacturers including
the CMPH which is a versatile OSP closure designed for both new provisioning installations
as well as rehabilitation of existing access points housed in metallic enclosures.
The CMPH’s superior structural strength, outstanding environmental protection
and ease of installation combine to create a long-life housing that reduces operational
expenses.
Highline Products is proud to introduce a new line of 15”, 24” and 32” transformer pads. Our innovative, patented, design results in a product that is extremely strong and durable, yet lightweight. These products are manufactured at our ISO9000 certified plant using compression molding tools and a specially formulated SMC (sheet molding compound). This process assures consistent product quality as well as other benefits.
ATS
carries several models of OSP enclosures, underground vaults, transformer pads from several manufacturers including
the CMPH is a versatile OSP closure designed for both new provisioning installations
as well as rehabilitation of existing access points housed in metallic enclosures.
The CMPH’s superior structural strength, outstanding environmental protection
and ease of installation combine to create a long-life housing that reduces operational
expenses.
Pedlock
BDO Series Pedestals are a key element of any FTTP solution. In both greenfield
and brownfield fiber deployments, BDO Pedestals provide easy access to branch
and drop splice while protecting and storing loose buffer tube fiber optic cables.
The exclusive BDO bracket allows technicians to mount splice trays and splitters
securely with ample access to perform in-field splicing.
BDO Pedestals feature
a non-metallic construction that offers super OSP protection against floods, fire,
dirt, insects and impact. An expanded-capacity split base is designed to easily
install around conduit-fed cable bundles in new construction (excludes 14” diameter pedestals). BDO pedestals are an ideal solution for rehabilitation of
metallic enclosures, and protection of co-located copper/fiber distribution points
Part
Number- Product Description
BDO
3-EG- 6” pedestal, split base, G bracket
(fiber only), bond bar
BDO 4-EG8-pedestal, split base, G bracket (fiber only), bond bar
BDO 5-EG
-10” pedestal, split base, G bracket (fiber only), bond bar
BDO
5-EB -10” pedestal, split base, B bracket
(fiber/copper), bond bar
BDO 7-OB-14” pedestal, round base, B bracket (fiber/copper), bond bar
Channel
Banks
360-80 Intelligent Channel Bank (ICB)
360/363 Series T1 Channel
Banks
D424/D448 Series T1 Channel Banks
VF Products
SurePath™ Automatic Protection Products
T1 Span Termination / Mini-Repeaters
T1
T1 Span Termination System (STS)
Span Termination System
STS Shelves
T1 Mini Repeaters & Plug-in Units
CiAC239A - Sealed T1 Mini Repeaters
CS239
Series T1 Mini-Span Line Repeaters
621155 and 621156 Type 239 Line Repeaters
Digital Pair-Gain Systems
2:1
DuaLine Digital Pair Gain System
4:1 QuadPOTS Digital Pair Gain System
8:1 Digital Pair Gain System
12:1 Digital Pair Gain System
Transmission and Signaling Products
Charles
Fiber Pedestals & Enclosures
PEDLOCK® BDO Series Pedestals
NEMA RATED FIBER OPTIC ENCLOSURES We can supply you with
a full line of standard and special NEMA rated enclosures and
components well suited for Homeland Security Product support.
Our own complete fiber-optics product offering can be leveraged
in certain cases to minimize lead-time and provide value added
solutions in a short time period.
Pull Boxes
$68.88 each
Vaults
Transformer Pads
OSP Cable
Fiberglass vaults 
--
Cable Guide 
Cableguide's
Ease O
LED CAT 6 Patch Panel 24 port (ATS102229) or 48 Port (ATS102230)
NEW-Siemon CAT 7 PATCH PANELS
